Photoshop :: How To Resolve CR2 Files In CS 5.1
Aug 7, 2012When I try to open or download CR2 files in Photoshop Ce 5.1 or Adobe Bridge it causes the program to shut down.
View 3 Replies
ADVERTISEMENT
Photoshop :: How To Resolve Apparent Conflict With Versions Of PSD Files
Oct 20, 2012I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD conversions?
Environment: Windows 7, CS6, Lightroom 4.
Photoshop :: How To Resolve Apparent PSD File Conflict
Oct 20, 2012I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD converions?
Environment: Windows 7, CS6, Lightroom 4.
Photoshop Elements :: How To Resolve Error While Importing IPhoto 11 Photos
Jul 11, 2013I am trying to import my iPhoto library into Elements. It gets part way through the process and then tells me that the import failed and provides the following message:
2090 Media files have been imported. 19 Media files were not imported because the either already present in the catalog or are not supported.
AutoCAD Inventor :: Resolve Link Message
Dec 7, 2012I don't use content center parts very often but on one particular file I have some screws that are coming up unresolved each time I open the file. How would I resolve this?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Inventor :: IDW Does Not Attempt To Resolve Links?
Jan 17, 2012I am working on Inventor 12, previously Inventor 10 and recently (approx 4 months ago while I was still on Inventor 10), all of a sudden, if I tried to open a drawing where components had been deleted for example, it would not try and resolve the links, just straight crash the program.
Windows 7 Professional 64-bit
Nvidia Quadro 2000
8Gb RAM
2 x Quad Core Intel i7 2600 CPU @ 3.4GHz
AutoCAD Inventor :: Non Existing Resolve Link
Mar 20, 2013I'm getting a Resolve link screen when I open an assembly but the part it needs doesn't even exist in the assembly.
Is there a way to remove this link, so I don't get the screen everytime I open the assembly.
Work: Autodesk Inventor 2010
Home: Autodesk Inventor 2013
AutoCAD Inventor :: Unable To Resolve Link
Jul 18, 2012 Autodesk Inventor LT 2011
After renaming several derived parts, 1 of the parts won't re-insert/link itself into the .ipt model. I receive the error message as shown. (please note: actual file names and locations aren't shown)
D:ConceptPart5.ipt has a reference to D:HardwareUSB-B.ipt. It has been resolved to D:HardwareUSB-1020.ipt which is not the same file as originally referenced. The resolved document is not usable!
The original file name was titled USB-B.ipt while the renamed file is USB-1020.ipt.
AutoCAD Civil 3D :: Resolve Non-existent Crossing Breaklines
May 30, 2013Dealing with an old topo. Building a surface from a point group of points in the drawing, and 2D polyline being used as proximity breaklines.
Here is my list of events after I rebuild the surface:
So I went to use the 'Resolve Crossing breaklines' tool, and here's what that looked like:
So are there or aren't there?
When I use the 'Zoom to' feature, it takes me to the midpoint of a TIN line on a breakline, with no other objects around. Crossing window selection: only the surface and one polyline. I found one crossing breakline just by accident, not from either of these tools. After I fixed it it didn't change anything. I even deleted all the breaklines from the surface and added them again, closed drawing and reopened, no change.
AutoCAD Inventor :: Delay In Resolve Link With Project
Oct 28, 2013I got a support contact a customer due to delay in opening some certain designs. The client works with a single project file to all your machines projects, being:
- 1 path in WorkSpace
- 1 path in WorkGroup
- 1 path in Content Center
After some testing I noticed that the drawings that had some missing file and fix the broken link needed had the problem of delay in opening. (9min for appears the resolve link screen) (simple drawing with 1view of the model inserted)
So I did a simple test.
Define a new project, the existing Default.ipj. And open the same file. To our surprise, the screen Resolve Link quickly appeared (30sec), quite different from the other project used.
My opinion of this delay, the current project, contains over 1million files easily. And as in the case of an Inventor file lost link searches for the file in the paths defined in the project, eventually causes loss of time behind files.
Before course, I also performed the same test on file with the option "Defer Update" and even then there was a delay(7min) in opening the file.
This visibly clear that, when using a project with a workspace without files, and open a file Inventor does not do research, trying to find substitutes for the file.
My question is:
The Defer Update should not simply ignore the model file and do not make the search, just opening the file? And also
Is there any way to set a file IPJ, with any paths in Work Groups, and Inventor, not to make a search for the file in other locations, just as it existed previously, and display the screen Resolve Link?
AutoCAD Civil 3D :: How To Resolve Super Elevation Overlaps
Aug 12, 2013I'm a little surprised with this....
I dont imagine how c3d does this .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Civil 3D (2013) how much you have to improve....
AutoDesk Smoke :: Import Into Resolve For Color-grading
Apr 8, 2013I have found a thread about exporting and/or publishing an edl to import into Resolve for color-grading and then back to conform in Smoke for output. Is there a detailed video on the Smoke Learning Channel yet.
View 6 Replies View RelatedPremiere Pro :: How To Roundtrip And Transcode Footage For Davinci Resolve And Others
Jan 3, 2014I'm cutting a project using multiple codecs in Premiere CC, but I want to grade it in Davinci Resolve- a software that can't handle MXFs and MP4s and H264s in the same sequence. My colorist is asking for a sequence in a single codec- preferably Pro Res.
I'm trying to do the equivalent of "Media Manager" in FCP to simultaneously move and transcode the footage from my finished sequence to a new location, but I'm having trouble finding this.
The "Project Manager" feature in Premiere Pro CC was incredibly buggy. It took 15 minutes to export a test sequence that was 15 seconds long and it didn't even trim my clips- even though I selected that box. This took up a ton of hard drive space. More importantly: It doesn't give me the option to transcode on export.
Does this feature exists? I'm a professional editor and Premiere needs to play nice in finishing if I'm going to continue to use it.
AutoDesk Smoke :: Export XML To Send Sequence To DaVinci Resolve
Jun 29, 2012In a future release of Smoke 2013, will it be possible to export an xml to send a sequence to DaVinci Resolve since Autodesk Lustre still does not work on mac?
I understand that Smoke has some great color correction tools, but when it comes to be fast and productive, a dedicated color grading application is what is needed.
AutoCAD Inventor :: Resolve Link - Reference To File Error
Jun 25, 2012I have created parts made up of a smaller parts themselves, them multiple assemblies of different parts that are all used in a final asembly. Now I need to give this whole assembly to someone. I tried sending all the files together with the assembly. However, when the receiver tried to open the assembly, most of the file references could not be resolved and inventor asked for the path of each, which would take too long to do. Is there any way around this?
View 1 Replies View RelatedPhotoshop :: Any Way To Batch Process Color Corrected RAW Files To TIFF Files
Nov 11, 2013I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
Photoshop Elements :: Copy New Files Only (Ignore Already Imported Files) Not Working
Dec 27, 2013I am using Photoshop Elements 10 Version 10 (20110831.m.17215) and everytime I plug in a memory card to upload images it wants to upload every image on the card, even though it has previously uploaded images from that card, even though I have the "Copy New Files Only (Ignore Already Imported Files)" box ticked in the preferences Camera or Card Reader section. This gets very frustrating and time consuming when I have to go through the images every single time to uncheck the images that have already been uploaded.
View 3 Replies View RelatedPhotoshop :: CS6 Won't Play Or Process Dolby Digital (AC-3) Audio Files From AVCHD Video Files
Jun 13, 2013Photoshop CS6 Extened won't play or process Dolby Digital (AC-3) Audio Files from my AVCHD video files.The video plays fine just no sound at all. When processed still no sound. Are there any (AC-3) audio codecs I can download and install. How would I install them. Do I need to convert audio files to another format & if so how & what format.
View 1 Replies View RelatedPhotoshop :: Unable To Open Files Or Create New Files In CC Trial
Oct 15, 2013After getting no support from your phone support line. I am writing here in hopes that this issue can be resolved. I cannot open files or create new files in Photoshop CC trial.
View 3 Replies View RelatedPhotoshop :: Convert Full Resolution Files To Web Based Files
Jun 6, 2012I am working on a museum project. I have been asked to convert full resolution files to web based files using "Save for Web and Devices". The problem is in the file naming. Museums typically use accession #s for each work. Example 1999.63.102 So the digital file would be named 1999.63.102.jpg (or tif).
When I attempt to save the file using "Save for Web and Devices" the resulting name is converted to 1999.jpg I believe the . (periods) to be the culprit. There are hundreds to do so renaming is not an option. This does not occur when I use "Save as".
Photoshop Elements :: 12 Hides Panasonic RAW Files - Unhide The Files?
Jan 2, 2014PSE 12 has a new feature under Preferences/Camera or Card Reader called "Alutomatically Stack RAW and JPEG." Checking this will stack a RAW & JPEG file combination, i.e., when shooting with the camera's RAW + JPEG setting checked. In my case PSE 12 appears to stack my Panasonic RAW files and each JPEG thumbnail shows the right facing arrow to expand the stack. When I click the arrow the arrow disappears but the stack does not expand to reveal the RAW file. The RAW file still exists on the hard drive, but I can't find any way to reveal it in PSE (I've not tried to re-import the RAW files because there are a lot of files in a lot of folders.) This is rather critical and needs to be fixed.
View 11 Replies View RelatedPhotoshop :: Why DNG Files From RW2 Raw Files So Large (37MB)
Mar 29, 2012I have a fairly new Panasonic Lumix LX5. I've recently converted a few files to DNG. They're turning out to be @ 37MB, over three times larger than the original file.
I'm not embedding the original raw files in the DNG. NEF files I convert from my Nikon D2x are around 9.5MB. I'm running Mac OS 10.5.8, DNG v 6.6 and also use PS CS5.5 and Lightroom 3.0.
Photoshop :: CS6 Disable Compression Of PSD And PSB Files - 8 Bit Files Too?
Aug 19, 2012I'd like to know if the new CS6 Preference which allows users to "Disable Compression of PSD and PSB files" applies to 8 bit files.
The reason I am asking is that the DisallowFlateCompressedPSD registry change for CS5, which disables compression of PSD and PSB files does not work for 8 bit files (it only works for 16 bit and 32 bit files)I work on large 8 bit files (4-8GB) and would like to know if CS6 would allow me to disable compression on those files.
Photoshop :: 3D LUT Files / Difference Between LOOK And ICC Files
Apr 27, 2013er to color grading, I would like to ask about the difference between .look files and .icc files. As far as I understand .look files contain 3d luts and .icc profile files also contain those luts. What is the difference between these two file types?
View 10 Replies View RelatedCorelDRAW Graphics Suite X5 :: Saves Of CDR Files Stopped Working Just Get Blank Files?
Oct 28, 2013Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies View RelatedIllustrator :: Files Don't Show Up In Acrobat File List When Trying To Combine Files Into Single Pdf?
Sep 24, 2013Illustrator files don't show up in Acrobat file list when trying to combine files into a single pdf
View 9 Replies View RelatedLightroom :: Will Current Plugins For Sigma DP1/2 RAW Files Work With Files From DP1/2 Merrill Cameras
Oct 24, 2012Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?
View 2 Replies View RelatedAutoCAD .NET :: Read Excel Files Through Script Files / Declare Variables
Oct 1, 20131. Is it possible to read excel files through script files.
2. Can I declare variables in script files.
Illustrator :: Linked PSD Files Not Found When Opening AI Files Via Shared Folder
Mar 17, 2013My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
Lightroom :: Scrambling Raw Files - Affected Raw Files Open Fine In Other Programs?
Mar 27, 2014After many years of using LR this is the first time I've encountered this issue (see 1st screenshot below). LR is scrambling my files. The affected raw files open fine in other programs, including adobe photoshop cc (see 2nd screenshot).
View 15 Replies View RelatedLightroom :: Nikon D600 - Deleting Files And Saving Files Brings Up Error Message?
Feb 25, 2013Deleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
View 1 Replies View Related