on my website (2hinsurance.com) I've created the costum header and put there logo whic I created with adobe photoshop cs5.1 and when I scroll down the titles of pages down of them crosses the header text.
The logo text is in JPEG format. I've tried PNG and some other formats but doesn't work. Which format I need to do the photo to make a solid background not to be crossed by anythig? I hope you understand what I'm asking?
on my website [URL] I've created the costum header and put there logo whic I created with adobe photoshop cs5.1 and when I scroll down the titles of pages down of them crosses the header text.
The logo text is in JPEG format. I've tried PNG and some other formats but doesn't work. Which format I need to do the photo to make a solid background not to be crossed by anythig?
i have a problem because i want to render my videos in after effects in H. 264. I cant choose this option, i have tried to click on QuickTime movie and then go to format options, and then use H. 264, but if i do that i get the error ( 44 :: 81 ).
1. How can i choose H. 264 in the format menu?
2. Is it a problem if I just render even with getting that error?
They may get caused because i use AAE CS4, I can't get CS5.5 and CS6 because of 32-Bit system.
is it posible choose 'framebased' format while burning bluray dvd using UVSX6? how?
since i found the result disk i burn with 'upper field first' looks not as sharpness as the m2t file output with bluray h264 30p (framebased) format, it looks like there are only half pixels amount in vertical direction.
P.S. i look result disk through BD dvd player software on my pc.
How can you format or resize the photos as wide screen format so they will display in wide screen mode on Sony photo frame players?
View 1 Replies View RelatedI am working on a 3' x 10' banner with 300dpi in Photoshop and it takes all of my time to do the extra tools to do, and it takes 10 minutes to save it or more. I have powerbook and CS6 on me. I put the highest memory in Photoshop preference. So I am bearing to work with it for hours for one small assignment, but why does it takes so long? is there a better way to do to save time and speed to make the poster banner to look greater than life? even in 200 dpi?
View 10 Replies View RelatedI am beginning work on a file that is suppose to be W-600cm x H-150cm. My question is what DPI per cm must I choose ?
I have been working with business cards and other small designs on 250 DPI, but never on such a large file. I want the quality of the design to be great, what is the best DPI for such a large size ?
When I go on Photoshop CS5.1 extended, and choose "3D" "Repousse" than I click on "Text Layer" it brings up a message saying this: "Your 3D scene now exceeds the limits of lights and/or textures for the video card's hardware-accelerated 3D rendering. As long as the limits are exceeded, 3D rendering will be done in software only, and some features (E.g. Repousse) will be disabled" then when I click "Okay" it brings up another message saying this: "Could not complete the Text Layer command because of a program error." then I click 'Okay' again and nothing happens, what does this mean?
My video card is: Mobile Intel(R) 4 Series Express Chipset Family and is up to date.I have 64bit Operating System and my Installed Memory(RAM) is 2.00GB.
I'm trying to find out if there's a way to choose which font you want Photoshop to use as a substitution rather than it choosing on its own? I found another thread asking the same thing but the answer didn't actually answer the question. To clarify, is there a way to tell Photoshop which font to use throughout a document (or even better, all the time) as a substitute for a particular missing font?
View 2 Replies View RelatedI use tile on 95% of my jobs. It is a waste of space when I tile all vertical pictures because I do not have the choice of Tile Vertically or Tile Horizontally as on previous version of Photoshop.
I tried the different choices offered on "arrange document" and there is non with the vertical choice, unless you choose one that displays my photos some on one size and the remaining or two or three remaining, a different size to fill up the screen.
Having a rough time trying to blend a face onto another face, been watching tutorials. I have both layers selected now and I go to Edit > Auto-Blend Layers, but the option is faded and I can't choose it! What could be causing this issue?
View 2 Replies View RelatedI want to put a person as a logo in a white background. I have the person in a picture which has other things that I don't need. I only want to extract the person from the picture and being able to resize it and use it as a small logo in a background.
View 2 Replies View RelatedI have an Photoshop Elements 8, where I created a flyer in A5 size. Includes a logo and text and a background.
The print shop wants the image in PDF format to print the flyer. When I press "Save As ..." and choose to save the file in Photoshop PDF, select the image quality, fileformat (JPEG or ZIP), etc, I press the Save button. When I then go into the folder where I saved the file in there that is not there.
in PSE12 I have my own old structure in C-drive. With this structure activated, the preset with LOCAL ALBUMS disappear. So when in my own C structure I can not find and see my old albums and hence I can not add pictures to old albums. In PSE10 ALBUMS and TAGS where on the right side and very easy to work with, now I only have imported tags on my right side.
View 5 Replies View RelatedWhat is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
We have a computer that using AutoCAD Architecture 2013 and Acrobat 9 Standard. When printing a large sheet (30"x42") with images in it to a PDF the images do not appear in the newly created PDF. However, if the same file is printed to fit an 11x17 the images display correctly. Any thoughts as to why the large sheet size is not printing properly?
View 1 Replies View RelatedRunning Photoshop CS6 Extended 64-bit.
For some reason I cannot choose between Video Timeline & Frame Animation in the Timeline window. I do not know why, I've looked in the Timeline panel options, still nothing.
I would like to create an action where a user is able to choose from a particular set of patterns (created by me) and excluding all the others (that may be present otherwise) from view. My action is currently working either from choosing from the whole pattern set (using insert menu item in the action), or a single pattern of my choice. (no insert item menu used).
I want the user to choose from my set of pattern in this particular instance but not the others that are currently in the presets.
I had the idea of making the action replacing temporarily the patterns with my set (replace patterns in the drop down menu) and then reset or load the user's set at the end of the action. It made me think that maybe people wouldn't want me to mess with their presets in an action.
I am currently using PSCS4.
I can either use a new pattern layer or a new "blank layer" with a pattern overlay (layer style)
I am really looking for a spark that'll light my Eureka moment.
Running a Intel Mac on 10.74 - CS6
I have two video cards running three Dell Monitors.
The ATI 5770 (runs the 24") is on the 16 lane PCI slot and the older Nvidea 8800 GT (running two Dell 19") is on the 8 lane slot.
But photoshop chooses the slower card on the slower lane.
I was wondering whether there is any way to choose the color of the user interface. By this I mean the toolbar, layers panel, etc. NOT the background, I've already figured out how to do that. Right now the toolbar/layers panel is this light grey color, and I'd like to change it so that the entire screen is a dark grey color, just as it is in CS6.
View 1 Replies View RelatedThe "Edit In..." function doesn't wok when I choose Photoshop CS5 and select the "Edit a copy with Lightroom adjustments".
View 12 Replies View RelatedI am using a CS6 trial on Windows 7, I can get more specs later but I can't remember anything else about my operating system (on a different computer at the moment).
I have noticed sometimes that when using a Levels adjustment layer, the drop-down to choose the different channels (red, green, blue) is grayed out, and I cannot click on it to choose the different colors. The numbers in the input & output boxes are also grayed out and I cannot type in them. The only time I have noticed this happening is directly after cropping an image. And then when I go to work on a different image and add an levels adjustment layer to it, those things are still grayed out. I have to restart the program to get it to work properly again.If I add a Curves layer, nothing is grayed out, everything works fine; it's just Levels.
How do I choose an area of my image and use it as the "color" for my Brush tool or another tool.
Example: I have some grass, and here I use the lasso tools to select a small area to subsequently be able to paint with it.
When i use the pen tool to make a shape and then select fill path, i choose a colour to fill the path with, but it fills the whole page accept the shape. Is there a setting that needs turning off or anything like that!?
View 3 Replies View RelatedI have several images in my project bin, then use the Arrange icon to divide the workspace into "2 up."
There are now two images side by side.
Over the left one are several tabs, although not one for every image (they don't all fit).
Over the right one is a single tab, with the name of the open image.
How do I change which image is shown on the right?
I can change the left one by selecting the left image then double-clicking on the image I want in the project bin.If I try the same on the right, the image I double-click on goes into the left side of the window.I can't pick from tabs, because there aren't any (other than the currently open one) over the right window.
I am using PSE10 with Windows 7. I've looked at the on-line documentation and tutorials, and they don't go into details about controlling the division of the windows.
Photoshop 11 quis when I try to choose a media type from priner settings on my new macbook pro. I am using an Epson RU2000 printer, and do not have this problem on my old macbook pro.
View 7 Replies View RelatedI just upgraded my macbook pro to a new drive and 10.6, and chose 'case sensitive' HFSX, 'cause I'm a heavy command line user and wanted the maximum BASH experience.I'm trying to install the CS5 demo to try some web design tools, and the installer immediately says "Installation to case-sensitive drives is not supported. choose a different drive location to install." So case-sensitive drives aren't supported; crappy but fair enough.
The error message leads me to think that I can just choose a non-case-sensitive drive to install to, but I never get a chance to pick one - I click on the installer and it goes straight to the error message.So - how do I pick a different drive to install to? Am I just an idoit, is there no way to select a different drive, or will it not install on a system that even BOOTS from a c.s. drive, regardless of the format of the drive that CS5 is installed to?
how to choose a frame to match existing photo size
View 1 Replies View RelatedUsing photoshop elements 9, the print driver printer settings are not allowing me to choose a drop-down option for page set-up "sheet" or "media type". This is where I should be able to choose "cassette", but it's only showing me a blank drop down. I tried Espon help. I tried Adobe chat. Using a MacBook Pro 10.6.8. Just getting to the "printer settings" is buggy too, as it won't go to it until I've chosen another option, e.g. "Roll Paper Settings" first.
View 4 Replies View RelatedI have a clipart that a friend drew for me that is black and white. I scanned it, added to it and saved it as a .psd. I used a reduced size clipart to add some color. I than decided to add color to the full sized clipart using the bucket tool. The color picker will not allow me to choose any color other than blacks, grays, or white. It worked fine with the first clipart but nothing after. I tried in Elements 6 and just purchased Elements 12 hoping that would be the ticket.
View 1 Replies View RelatedWhen I use the gradient tool in simple depth field in photoshop element 10 my whole image unblurs even when I chose a smal area to focus. It used to work well before but for one reason or another, it stopped. I uninstalled my program and that didn't fix the problem.
View 5 Replies View Related