how to change the fabrics in curtains on photoshop?
I can change it so there is a block of a different fabric but it needs to be more transparent so you can see the curves and folds in the curtain in the origional picture but I do not want to see the orgional fabric. Is there anyway of doing this?
When you change a fabric or a pattern on an object how do you get the pattern to repeat as it would in real life? For example if I change a fabric on a curtain how do I get the pattern to look as it would in real life so it isn't enlarged or distorted?
View 2 Replies View Related1. IS there a way to take a 10ft 2.5inch by 7ft picture and cut it up into 3inch by 12inch and have all of those save as output?
2. My second question is if I can also save it to a file with white background with .5inch margins on the left and right (so its a 4x12 inch image)
I intend to make a wall poster on my venetian blinds and ill fold the .5inch margins over and tape them to the back of the blind.
I am currently photoshopping (CS5) this picture and how to reduce the transparency of the curtains (in the bottom half a terrace and window frame are shining through)? I tried playing with the 'Output Levels' on those areas, but the result is quite uneven. If only the folds were parallel I could stretch the top part over the terrace.
View 5 Replies View RelatedI'd like to create three bordered/round-corner boxes (containers) for text, across a web page. But I'd like them not to just be flat in a row. My idea is to put the text in each three in-a-row boxes and them somehow turn the boxes(containers) out slightly like loovers (like vertical window blinds), so they look a little more interesting. The text wouldn't then be viewed straight-on but look like it's at an angle because of the loovered containers that the text is in.
View 1 Replies View RelatedI'm a model, I need to design a model for window curtains and bed with my blanket.
For example, I took the picture.
How to model these lamps and curtains(hung from ceiling) made of threads. I am particularly interested in how to model these to look like natural threads as realistic as the picture.
See the image attached.
The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View RelatedWhen I try to print a photo and use "Change Settings" to change from "plain paper" to glossy photo paper nothing happens.
View 3 Replies View RelatedI am trying to set up auto importing by tethered shooting with a Canon 1Ds (but don't think brand and camera matter.)
I never use DNG, and am not aware of, and after a lot of searching, cannot find anywhere in the LR4.3 preferences at which I specified DNG conversion. In the Auto0Import dialog there is a File-handling tab that offers one choice: how to spell the dng suffix. The files I want to import will come in as CR2., and testing this with other folder destinations and with Canon's EOS Utility prove that the camera is "sending" CR2 files.
I have a spreadsheet and iLogic driven mater assy to generate different iterations.
I would like to change the scale of a base view on a drawing based on a parameter in my assembly. The idea is to get iLogic to change the view using a simple If / Else statement.
This is what I tried:
If Parameter("0 Generic Assembly v2.2.iam.BP") < 1570 Then
ActiveSheet.View("VIEW1").Scale = 1/8
Else
ActiveSheet.View("VIEW1").Scale = 1/10
EndIf
So basically the value of "BP" parameter (excel parameter in my assy) would drive the scale of the views. But its not working. Is it actually a sensible method? Can I use in the drawing environment the excel parameters in my assembly?
This is the error message I get when the rule is run:
"Error in rule: View Scale, in document: 0 Generic Assembly v2.2.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))"
Also using the same thinking I use iLogic to populate the drg number field on the drawing based on an excel parameter. The rule works but does not always updates the drawing no upon the parameter change or update/rebuild commands.
i have tons of column tags but wants to change the distance between column size and the circle and make the font smaller. I can do this individually but can't do one by one..... is there any way i can adjust all by one command or one magic touch?
View 3 Replies View RelatedHow do I create an Inventor part with a cost that will update according to the part dimensions changing. For example, we design products using aluminum extrusions and our cost is determined by foot length. How can I create the extrusion part to have a per foot cost that will dynamically update when I change the parts length for an assembly? It seems to me to be a fundamental need for many industries.
I will happily take any links to information that will explain this process. I cannot find anything online that clearly explains the process of creating parts with costs and variables.
Mleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
I didn't notice when and why it happened, but now when i draw white line, it appears brown. I didnt change any settings, just did my usual work, when it appears. Other colors are normal. What could it be?
View 6 Replies View RelatedBelow is a .jpg copy of the Vitruvian Man that I bought on istockphoto.com. I would like to get rid of the gold background and keep the black line work. I would like what was the gold background to be transparent. I would like to convert this .jpg to a vector file using Adobe Illustrator CS5. To do this I assume I somehow use the Live Trace feature but I'm not exactly sure how.
I would then like to be able to select the black linework and change it to red. Does this mean I need to somehow convert the drawing into a collection of indivdual paths and anchor points? When I've used Live Trace before, I had the tolerance set to about 45 and Simple Trace. This indeed got rid of the gold background but gave me no individual paths or points I could select and change the color of. The only thing I could select was the image as a whole, not individual points or paths. It was the entire image within a box. This occurred whether I used the black arrow tool (Selection tool ) or the white arrow tool (Direct selection tool). If no, then how could I change the black linework to red?
Trying to get the tolerance on a hole to be what I want. I changed the tolerance on the hole, but my idw did not change. When I went back and looked at the tolerance on the hole, it was back to the original value. No matter what I do, it will not change to what I want it to be in the part. Here is a short video.
The dimension I am changing is .9688 and it keeps jumping back to .9686 when I go back into the hole tolerance.
Tried other values too and they would not take either...
Entered Value Inventor Value
.9688 .9686
.9690 .9686
.9693 .9696
.9695 .9696
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013
So, I haven't been using Illustrator (CS5) for a two weeks and I always create calligraphy brushes on the go, so I don't save them. However, out of the blue, I can't change the brush diameter to change with pressure nor the other options because they're greyed out.
Im using a Genius G-Pen M712X and mac osx 10.6.8..
I'm having in CS6..I have a text block with a couple of styles in it (headings have one look, body copy has another). Here and there, some words are on bold. When I select some bold words and change the color of them, some other bold words in some other paragraph also change color. Not all bold words... just some. The behavior is unpredictable, so the exact words that get changed will vary, but once it starts to happen it won't stop. When I try to manually fix the other words (hopefully I noticed them before my client!) and change them back to black, sometimes that change reverses the color on the original words too. Sometimes not; it's like the effect is sometimes two-way and sometimes one-way. It becomes a real logic puzzle sometimes, a maddening game where every change affects something else and you can't find the combination of actions that will do the simple thing you want.
I haven't noticed it happening with non-bold text, but that could just be coincidence.
When this happens, the only fix seems to be to rebuild the text from scratch in a new text box. (Copying it all and re-pasting it does not seem to work—unless possibly I paste into a different document entirely.)
As in the title, expected result in attached drawing. I'm trying to change Origin X /Y, but that doesn't change the origin of the hatch. It there a setting that controls it?
P.S. Is that drawing supposed to be 0.8Mb??
How change the GPU in Photoshop CS6? My photoshop only detect my intel GMA and my pc have one geforce 640m what can i do to change it?
View 1 Replies View RelatedI have the boxed version of CS5 running on my PC. I want to install on my new PC. How do I achive this to re register on my new PC?
View 1 Replies View RelatedCan you change RAW photos to DGN with CS5? Is there a download?
View 2 Replies View RelatedI want to use pictures in Premiere Pro and want to change the pixels from 1.0 to .9. I know how to do this in Premiere using interpret footage. But I wanted to do it in Photoshop - I thought that would be the place to do it?
I know to go under view and pick PAR and then pick what I want. I then try to save as and use it but it reverts back to the 1.0 pixel, as though I never made a change to the photo. I have 300 photos so any way to do this with one command for all would also be useful.
I have made a short animation, how do I change a gif to an Mv4 so I can upload it to make an e-book
View 3 Replies View RelatedI would like to change the sky in some of my pictures. I have various pictures of different types of sky, but I can`t figure out how to use them to replace the original.
View 2 Replies View Relatedrequires lots of screengrabs of images and settings against the usual dark gray CS4 background. The problem is that the guidelines you adjust to form a rectangle round the image you're grabbing are dark grayish too and it's difficult to see it against the gray background. Is there any way to temporarily change the dark gray CS4 window background color? I'm running under Vista and changing the window and application background colors in Vista makes no difference to the background color in CS4 which sticks at dark gray.
View 16 Replies View RelatedI am using CS4 to take it.
Here's the discrepancy. When she draws a circle on an image by holding down shift/alt with the elliptical marquee tool, she starts the circle from the center of the circle but from the edge of the image. When she lets go of the mouse, her circle remains drawn and suspended out of sight off the image and she's able to move the circle around on the image. When I let go of the mouse in CS4, the selection commits itself to the image and I wind up with a fixed selection in the shape of a polygon with one completely rounded side. When I move the selection, the straight edges move with the curved edges, making it impossible for me to do what the teacher wants me to do. I found a workaround for it by moving the image temporarily onto a much bigger new file, but I--and other students in the class--are really curious about how to make this work as our teacher does. One of the other stumped students just suggested to me that this might be because we're working in CS4.
I purchased he pc version of CS5 last year. I am thinking of changing to a MacBook Pro.Will I be able to download the Mac version?
View 1 Replies View Relatedhow do i change pdf to jpeg
View 1 Replies View RelatedI just bought PS CS6 on suscribtion, and everything turned out as it should - except from the language. I'm from Denmark, and somehow it automatically installed PS in danish. But... I want it in english. How can I correct this?
View 3 Replies View Related