Photoshop :: Getting Grey Box When Printing
Dec 20, 2003I'm Getting a grey box around my image when I print. I tried resetting my pref. but still get it.
View 1 Replies
ADVERTISEMENT
Photoshop :: Printing Grey
May 8, 2008I want to print my black and white image grey in order to preserve ink what should I do? I'm making stencils so using alot of black isn't necessary.
View 1 Replies View RelatedPhotoshop :: Printing Grey In Color Space
Sep 9, 2008I'm creating images in Photoshop and printing to a Xerox solid ink printer. If I print in greyscale everything is fine, but if I have an image that has both color and B&W portions, the greys come out green (or brown depending on whether I print from CMYK or RGB). Is there any way to have a portion of an image in a color space and others in greyscale?
what I might try as far as the printer? If I print CMYK the greys come out really green but all the other colors are good. If I print RGB the greys come out browner (which is a little better), but other colors get muddy.
Is there any way to get a printer to stop trying to "interpret" greys as a color when in a color mode?
Photoshop :: CS6 / Black Turns Solarised Grey On Printing?
Jul 25, 2013CS6 on imac and canon MG6150 printer.When I print a photo with areas of black the result looks like the black has been solarized and it prints out as a dirty grey with black edges.
View 9 Replies View RelatedPhotoshop :: Faint Grey Border When Printing On Roll Paper In CS5?
Jan 4, 2013When I print in Photoshop CS5 on roll paper, there is a faint grey border that prints all around my image. I haven't created a grey border in my files.Â
what setting is creating this or what's going on? And how i can stop it?
Photoshop :: Printing Out Of CS5 On Epson R3000 Prints Light Cyan And Grey Background
Feb 21, 2013I have an Imac with Mountain Lion, CS5 and have just replaced my Epson R2400 with an R3000. Now the white background round the image is covered in small cyan and light grey dots. If the image fills the paper, then the margin is affected. But when trying to proof colours I am going through loads of paper as I cannot now print a smaller image on a larger piece of paper, then re-feed the same sheet through with another small image as the paper is now pale blue.
Â
The R2400 was fine for proofing, as the image alone would print and then the printer fed through the remainder of the sheet without printing, leaving the rest of the paper white. I understood from that , that it was most likely a Photoshop issue and some sort of conflict with the Paper profiles. But, I have checked the profiles on my Mac and they are all version 2 profiles. I note that the few profiles that do work without the blue colour do have 'bkpt' in their profiling and that the ones for the paper I actually do use and in fact the majority of the profiles, do not contain 'bkpt'.
CorelDRAW Graphics Suite X6 :: Printing Grey Color Coming In Dots
Jun 30, 2013I am working in printing press, when I am giving trace sheet print. The grey color was coming dots.
View 3 Replies View RelatedAutoCAD 2010 :: Plot Drawing And Grey Lines Are Printing On Top Of Black?
Apr 9, 2013Im trying to plot a drawing and the grey lines are printing on top of black. how do I get black to print on top of grey? I am using MEP2013
View 4 Replies View RelatedCorelDRAW Graphics Suite X5 :: Postscript Fill Printing In Dark Grey Color?
Jul 4, 2011I have a simple design in coreldraw X5 and a rectangle with a postscript fill (example: color bubles), now whenever i print out this artwork the rectangle prints in a dark grey color and the rest is OK.
Before i used X4 and the same artwork with the same printer were working perfectly, but now this is happening since i use X5
Photoshop Elements :: Alter Background Colour From GREY To Lighter Grey As In Album 2.00
Dec 27, 2012can I alter the BACKGROUND COLOUR from the Grey to a lighter grey as in P/Shop Album 2.00 which is just what I want..I hate the darker colour as background..I have just purchased the Elements 11.Â
View 5 Replies View RelatedPhotoshop Elements :: Button To Change Preset Light Grey Background Colour To Dark Grey
Oct 12, 2012as a user of pse 6 I 'm used to work with darkgrey background in the organizer.
This works perfectly for quickly assessing brightness and contrast of pictures.
In pse 10 however I could not find any button to change the preset lightgrey background colour to darkgrey.
Photoshop :: Color Grey Is Always Redish Grey
Feb 10, 2004I try to use the color grey its always redish grey and never grey.
I tried changing my color settings from photoshop but it still wont work.
AutoCad :: Object Set To Plot Grey (any Grey) In Paper Space
Jun 13, 2013I am currently running Map 3D 2012 with CadWorx and I am having an issue with one of my multi tab drawings. Any object set to plot grey (any grey), that is in paper space, is plotting black only in one of my layouts. similar objects in model space and in both spaces on other layouts are all plotting accordingly.
View 0 Replies View RelatedPhotoshop :: Tile Printing With High Resolution Printing?
Oct 2, 2006i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer.
i really need to be able to tile print this in high resolution on film. anyone know what i can do??
Photoshop :: Grey/8
Jul 24, 2008I must have clicked something to make all my images etc go grey, what do I untick
View 6 Replies View RelatedLightroom :: Convert Colour Profile Of Custom Printing Package From Pro Photo To SRGB Before Printing
Oct 30, 2012How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies View RelatedPhotoshop :: CS6 3D Menu Grey Out
Jun 18, 2012I am now trying to use photoshop CS6 3D features. And I found out that no matter what I select, the 3D menu is still grey out.
What should I do to solve this?
I see some of you said that your 3D menu is missing because of the graphic card issue. For my case, what should I do?
Photoshop :: Viewport Goes Grey
Feb 11, 2012My setup:
Â
 AMD Phenom 9550
4GB DDR2 RAM
AMD Radeon HD4850 512MB
 Â
I sometimes have the problem(mostly when I work with a lot of files[10 to 15] or if I work with big files) that my viewport goes grey(so I can't see anything anymore). This happens when I use the type tool or when I use the transform tool. When I go out of the editing mode, everything is visible again.
Â
My settings:[URL].....
The drivers of my graphics card are up-to-date(Catalyst 12.1). The version of Photoshop that I work with is Photoshop CS5.1 Extended.
Â
I didn't have this issue a couple of years ago(when I still worked with CS3, CS4, CS5).
Â
I've googled this issue and only found people having problems with older drivers(Catalyst 11.3).
Photoshop :: PS 7 Grey Becomes Pink
May 19, 2004I just recently got photoshop 7 and have a problem with it, I currently have PS6 installed and it runs fine. When I installed PS7 today as it was starting up after the installation it came up with a problem with my monitor I ignored it because I didnt and still dont think it is/was the problem.
The problem I have is well...pink. Everything is pink, many shades of pink, I can even get some dark purples but thats it I have no access to normal colors, even when I change the RGB settings.
Photoshop :: Grey Mystery Box
Jan 12, 2003I now scan an image or bring even an old one up into photoshop I am getting a little grey box in the upperleft hand corner and in it is a number 1 and some other symbol which I cannot make out. This does not happen when I bring the same images up in Paintshop or painter. I recently had to uninstall Zone Alarm and am wondering if this could have something to do with it or maybe it isn't even a PS problem but something on my computer.
View 2 Replies View RelatedPhotoshop :: Grey Scale In PS7
Aug 14, 2008I have recently installed PS7 on my laptop and when creating a new project, the defaul is sent on grey for the color, when I set it to RGB or CMYK and want to choose a color, I get the standard color box with about 20 colors instead of the color pallet I used to get.
What is the setting I'm looking for and how to I set it as the default?
Photoshop :: Displacement Or 3D Out Of Grey
Mar 15, 2009I'm trying to use either the displacement or 3D rendering function in Photoshop CS to make a realistic looking tattoo on a face, but I can't get "distort" or "render" to come out of grey no matter what I do.
View 1 Replies View RelatedPhotoshop :: How To Grey The Background Of Banner
Mar 10, 2012I do not know the 1stthng about PSCS5 or any other art program. Tryin to make a banne w/a jpeg logo, w/a grey background. How do I put grey in the background of my banner?
View 2 Replies View RelatedPhotoshop :: Grey Scale Conversion In CS5
Nov 30, 2012I've found a peculiar problem with grey scale conversion in Photoshop CS5.
Â
The problem:
Â
I have black and white photos in an RGB colour space. I can't use a black and white layer adjustment because there are no color channels in the image. I used the 'image > mode> greyscale' menu item to convert to greyscale, and in photoshop there appears to be no change to the greyscale values. However, when I place the image in inDesign, it is markedly different; blacks are pure black but greys are washed out.
I print the two images side by side (RGB and greyscale) and they come out identical (though darker than I expected). Is inDesign showing RGB or Greyscale differently on screen? I have the display settings at 'high quality'.
Photoshop :: Can't Switch Colors From Grey
Nov 13, 2012cant remember what i did but now my colors wont come out any different than grey
View 2 Replies View RelatedPhotoshop :: Add Color Cast To Grey?
Jul 24, 2012I'm trying to add a color cast to a grey, contoured button shape (defined by a vector mask), by overlaying it with an adjustment layer with a solid green fill and setting the blend mode to "multiply."
Â
The shape layer has transparent pixels around the perimeter, so I would not expect a "multiply" operation to result in visible green there. But it does. That's no good. I need to export this image to a PNG with the transparency intact.
Â
I can see that the green adjustment layer has a "Color Fill 1 Mask" channel, but copying the shape layer and pasting it into that mask channel doesn't seem to work. The display shows a very thin outline of the vector shape, but I can't appear to do anything with it.
Photoshop :: Grey Background With Some Lights?
May 29, 2013how accurate this looks, shall i go for removing the remaining text or should i generate a new background. i want an exact grey background without the text, i dont know how to work in photoshop at all[URL]...
View 7 Replies View RelatedPhotoshop :: 3D Effect On Top Bar Appeared Grey
Jun 28, 2012All my Photoshop 3D effect on the top bar are appeared to be grey cant be select, I have tried on the preference- 3D- select GL, but it is still not working.
View 20 Replies View RelatedPhotoshop :: Grey Image Using Merge To HDR Pro On Mac
Sep 12, 2012I have PS 12.05 64bit version on a Mac with 8 gigs of Ram and a QuadCore I7. I have tried using 3 NEF images, tried DNG images and JPG images, I end up with the same result, a murkey grey image. Hopefully the screen shot will come through showing my results. I have reset Pref file in PS, still the same.
View 8 Replies View RelatedPhotoshop :: Layers Menu Grey
Nov 28, 2004While editing some, but not all files in PSE2, I find the layers menu and palette grey and unusable. This mostly occurs when I import a file from the web. I have tried saving the file in tiff or pdf format, but still cannot get the layers to work.
View 2 Replies View RelatedPhotoshop :: Tiny Grey Squares
Nov 4, 2002There are a couple of tiny grey squares on the upper left corner of my files. One has a "01" and the other one a symbol which I don´t know what it is.
View 5 Replies View Related