I dont really know what to call this thread as it is hard to explain what I want.... So lits say that I have a circle and I want my font to take shape and fill the inside of the circle, how would I go about doing this... I know that you can set a path and have the font foll the path but that I not what I want... What I am really asking is a fill but with the text that I am writing...
View 2 RepliesI want to try an effect on the font only.
Can I use Render>Clouds on the inside of a font only?
I want to leave the background untouched (if filled) or transparent.
I don't want to use the magic wand tool on the font, and then cut out shape from a clouds background. I need more detail than that would offer to get the effect.
im writing text inside a shape and ive got that far ive even changed font sizes, now id like to write smaller text in the gaps between different font sizes. im using PSCS2.
View 9 Replies View RelatedI have a flag and a font with an offset path and wanted the center of the font filled with the flag.. How would i do this?
View 3 Replies View RelatedI'm after a little info on an issue that I currently have with Photoshop. I want to make a logo that's filled with images but maintains an overall shape,for example, a outline of Australia that's filled with approx 15 images all combined but does not go outside of the overall Australian shape, would also like the outer images to bend and follow the outline without it looking"boxy".
View 4 Replies View RelatedCreate a shape with the Rounded Rectangle > I apply a Gradient & Bevel
New Layer > Fill with White > Ctrl + Alt + G (clipping mask) > change Layer Blend to Multiply > Opactity to 35% > Filter > Noise > Add Noise
New Layer > Ctrl + Alt + G > Ctrl + Click on the Rounded Rectangle Shape to create a Selection
From there I am suppose to add a Stroke by right clicking on the object but that doesn't work. The only menu that pops up is a list of my layers. So, rather I select the Rounded Rectangle layer and then click Effects and select Stroke and then set the values for the stroke. Next I am suppose to add a blur.
Blur > Gaussian Blur but the Stroke ends up filling the entire object. No, I didn't set the Blur to like 1,000 it's only set to 5.9 . I tried this on an other computer and the same thing happens. I called Adobe but they were unable to assist even get as far as the Stroke.
How to take the Castellar MT font and fill in the blank spaces in the letters with colour? I need to use this font because that's my company's font for their name and I'm trying to design a sign. I have used the blob brush, but I keep getting tiny little specks that look like they're not filled in.
View 2 Replies View RelatedI am trying to follow this tutorial ...
[URL].........
Under #2 ... I am assuming the author means to draw with the Rounded Rectangle in Path mode ... am I assuming correct? I think it is suppose to be set to Path b/c it's the only way the Blend Mode reads "Pass Through"
this tuts steps aren't really numbered well but also under step two where the "BG" is filled with black the resulting shape is suppose to look like this :
But mine looks like this :
Notice how the left side has a lighter grey color and the one from the tut above is clear?
Also under step #2 ... where it comes to the part where I am to color the resulting shape with a yellow gradient this is what happens to me :
the entire canvas becomes colored ... ? Here are my Layers.
I select the "BG" layer to apply the gradient.
Here is the Layers panel from the tut which is confusing to me b/c the only difference I see is that the tuts panel has the down arrow and folder of the top layer/the "Body" layer seems to be greyed out... and the tut says something like : Activate the "BG" layer and cancel the mask view. Well, how to go about canceling the mask view and I looked all over Ps for such an "action" and also throughout the online manual.
We're trying to change the blue brush stroke below, to orange while retaining the textures: [URL]
- The attached pic is the closest we've gotten by luck: [URL]
- we'd like to do away with the darker colors
- and we'd like to actually know what we're doing and be able to repeat it
The orange pic was done on photoshop (not on my computer). how I got to the result. Is this possible on paint.net (the only kind of software installed on my computer)
I created a pattern in illustrator, and then I created an object, and I wanted to fill half of the object with the pattern, so I used a clipping mask to do this.. however, now when i try to group everything together, the clipping mask in released and the pattern spills all over the artbaord... when i try to copy and paste into a new document, everything is pasted as white instead. When i try to merge the layers, the clipping mask is released...
How to keep the clipping mask from releasing.. Also, I tried rasterizing but that doesn't work either and it makes my shapes all rough and choppy!
I added a patten fill to my libray, saved my default setting so it would stay, now everytime I draw an object it is automatically filled with that pattern fill...I even deleted the pattern fill from the library, saved default settings again, restarted corel, and it still fills an object.
View 4 Replies View RelatedMy image is in grayscale though it's recognised as RGB. It contains structures in white which I would like to fill with a colour. So basically, I'd like for all the white in the image to show up as e.g. red.
How do I do that? I'm guessing it must be possible to have a red layer and somehow this will then fill the white, but I'm getting confused with background and foreground filling options and I don't know which transparency options I have to choose.
I have the following image:
This actually started out as a font, and I converted it to an object with paths using apple-shift-o. I'm wanting to get rid of the balloon around the lettering, but am having a real hard time doing so using the convential methods (ie cutting, deleting the anchor points). When I do this, it seems to interfere with the lettering. How I can accomplish this for a piece of text I converted to an object?
I need to change the color of the M and [R] in this text, allow me to set the stage.
To create this symbol you type the Letter M, change the font to our companys symbol text and the following characters then follow. However when editing the text it is recognized as a single character. I have changed the text to outlines, however it still changes every letter when I change the color. I have went into isolation mode and it still changes every color.
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI have 26000 mtext that has overridden font inside the property. set to bold and print out look like crap.
see attached i want all the text to look like the text on the left. right is what they look like now. i just copied a few as an example.
can't find the font property in the mtext object:
PrivateSub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) HandlesButton1.Click
Dim doc AsDocument = Application.DocumentManager.MdiActiveDocument
Dim db AsDatabase = doc.Database
[code]......
How can I get the same effect as this without trying to convert outline to object, Corel freezes up trying to do it.
View 6 Replies View RelatedI'm selecting a shirt, then I do a fill with new color. Only annoying things is I have to guess and fill then guess and fill.
way to do this and be able to see on the fly as the color changes in the shirt?
I'm using Photoshop CS5. How can I replace all instances of a missing font with a font of my choice?
View 2 Replies View RelatedFont is fuzzy no matter what font type I choose, why is this happening? Using Photoshop CS6.
View 1 Replies View RelatedSo my friend is making these designs on paper and i am tasked to put them into photoshop. The problem is when i scan them in they are patchy they look horrible. Is there a quick way to fill in the lines or do i need to find a better way to transfer drawings onto the computer such as a better scanner?
View 1 Replies View RelatedI need to have a border of about two inches around my painting in the same color as the background of the painting. In the past, I've cloned the color out to my desired dimensions,
I want to open a new window in photoshop of the dimensions I need.... fill it in with the color of the background of the painting, move the painting into this new window, flatten it and print it out.
How do I fill the new blank document with the correct or close color?
This is a basic question as I am a novice with both Illustrator and Photoshop. I have a vector shape of an apple in Illustrator. It is 2 piece- the body and the stem. I would like to fill this shape with a part of a photograph.
I'm wondering if I should do this in Illustrator or should move it over to Photoshop as a selection and then do it there? I'm also going to bevel the edges of the shape.
The next question is how to do it, which tool should I be using in either program? Is this considered a "fill" operation or am I cutting this shape out of the photo?
I'd like to select a section of an image and then fill it with a texture from another image. For instance, I could add bark texture from a tree to a section of a face. I'm not sure how to select a texture from one image and apply it to another.
View 1 Replies View RelatedI created a pattern of concrete block coursing that I want to apply to a picture of the side of a building. The pattern is clipped so that it will repeat appropriately when filled into a large area. The problem is that depending on where I fill in the canvas, the pattern never fills in with the same start point. I want it to always start at the bottom left corner of the pattern (which is the bottom left corner of a block). Is there a way to set the point that a pattern moves out from? Also, does the pattern radiate from its center point or one of the corners?
In Autocad there is a snapbase command that lets you choose the start point for a pattern. This is exactly what I'm looking for in photoshop.
I have defined the picture of a brick wall as pattern. I want to fill an area with that but:
1) The area is smaller
2)I want it 2x2
(I had put a demonstration but it doesn't work)
my font is so small and its font size is at 72pt how can i make it big again
View 5 Replies View RelatedI am working in Photoshop CS4...have been for years. All of a sudden, when I try to fill a closed path with a color, it fills the entire art board with color, except not inside the path. I have not selected "inverse" or anything....and it has never done this before....I can't figure out why it has started doing this, and I can't get it to stop. Most of the paths in my file, I have made in Illustrator and then pasted into Photoshop...they work normally....it is just the ones I actually draw in Photoshop that are doing this....one thing I have noticed is that in the paths palette, the paths I pasted in from Illustrator have a grey background.....while the paths I actually drew in Photoshop have a white background.
View 4 Replies View RelatedI've used Photoshop CS4 for sometime but I'm no expert!A club I'm in has asked me to fill in pre-printed membership certificates with members names etc. The only way I can think of for doing this would be to scan the certificate and call it layer
1. Then fill in the new details and call it layer 2.I then remove layer 1 and layer 2 is in the correct position for inserting the certificate into the printer and printing on it.Of course this is just my theory, how to even try it!
every time that I want to expend my picture resolution I using the crop tool and make the photo bigger but PS filling the new area with transparency instead of white. How can I set it to be white by default ?
View 2 Replies View Relatedhow can fill in colors to letters like O etc .
I have written something in text form in a simple font.
now I just need to fill some colors to the spaces inside the letter O how can that be done.