Photoshop :: Filling With Pattern
Jan 17, 2006I have defined the picture of a brick wall as pattern. I want to fill an area with that but:
1) The area is smaller
2)I want it 2x2
(I had put a demonstration but it doesn't work)
ADVERTISEMENT
Photoshop :: Filling A Shape With Pattern
Nov 22, 2012this is not a hard one, but it is hard for me to figure out. i would like to find out how to fill a shape with some patterns exactly like how it looks in the below picture. As you can see, the filled pattern pictures(those small hearts) are not overlayed and the sizes are random. And the edge of the shape(that's the big heart) is just smooth. how to do it?
View 8 Replies View RelatedPhotoshop :: CS5 - Filling Area With A Pattern By Using Paint Bucket
Aug 13, 2012I have CS5 extended. I know with coral draw I can use a paint bucket to fill an area with a premade pattern and on CS5 I found the pattern stamp tool where I can paint a pattern but is there a way to dump or fill a set area with a pattern? I find when I paint a pattern even the smallest mistake of painting a section twice can lighten or darken the pattern.
View 2 Replies View RelatedIllustrator :: Filling Text Art With Gradient Or Pattern
Oct 4, 2012I'm trying to fill some existing arts (path, text, compound) with a just created gradient or a pattern loaded in the swatch..To achieve that I'm trying to change the path style:
GetPathStyle (myArt, &pathArtStyle);
pathArtStyle.strokePaint = false;
pathArtStyle.fillPaint = true;
pathArtStyle.fill.color.kind = kGradient;
pathArtStyle.fill.color.c.b.gradient = myGradient;
SetPathStyle (myArt, &pathArtStyle);
This works for kPathArt,but nothing happens for kTextFrameArt or kCompoundPathArt.
I also tried to program the procedure "How to Fill Text with a Pattern or Gradient in Adobe Illustrator" described for illustrator UI, w/o success.I have similar problem when trying to create a clipping using SetGroupClipped() while the clipping path is a text or compound. No clipping is done.
Illustrator SDK :: Filling Text Art With Gradient Or Pattern
Oct 4, 2012I'm trying to fill some existing arts (path, text, compound) with a just created gradient or a pattern loaded in the swatch To achieve that I'm trying to change the path style:
GetPathStyle (myArt, &pathArtStyle);
pathArtStyle.strokePaint = false;
pathArtStyle.fillPaint = true;
pathArtStyle.fill.color.kind = kGradient;
pathArtStyle.fill.color.c.b.gradient = myGradient;
..
SetPathStyle (myArt, &pathArtStyle);
This works for kPathArt,but nothing happens for kTextFrameArt or kCompoundPathArt.
How can I program this ?
PS: I also tried to program the procedure "How to Fill Text with a Pattern or Gradient in Adobe Illustrator" described for illustrator UI, w/o success
PS: I have similar problem when trying to create a clipping using SetGroupClipped() (see AI function reference) while the clipping path is a text or compound. No clipping is done.
Illustrator :: Clipping Masks - Filling Half Of Object With Pattern
Oct 29, 2012I created a pattern in illustrator, and then I created an object, and I wanted to fill half of the object with the pattern, so I used a clipping mask to do this.. however, now when i try to group everything together, the clipping mask in released and the pattern spills all over the artbaord... when i try to copy and paste into a new document, everything is pasted as white instead. When i try to merge the layers, the clipping mask is released...
How to keep the clipping mask from releasing.. Also, I tried rasterizing but that doesn't work either and it makes my shapes all rough and choppy!
CorelDRAW Graphics Suite X5 :: Pattern Fill Filling Drawn Object
Jul 2, 2013I added a patten fill to my libray, saved my default setting so it would stay, now everytime I draw an object it is automatically filled with that pattern fill...I even deleted the pattern fill from the library, saved default settings again, restarted corel, and it still fills an object.
View 4 Replies View RelatedPhotoshop :: Pattern Stamp Is Not Loading Correct Pattern In CS6
Sep 3, 2013The pattern stamp is not loading the correct pattern in Photoshop CS6. Although it shows the correct image when I go to Edit - Define Pattern, once I start painting I see that is not correct.I tried resetting my preferences.
View 3 Replies View RelatedPhotoshop :: Use Pattern Maker To Create A Tiled Pattern
Sep 18, 2012I have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
View 2 Replies View RelatedPhotoshop :: While Filling?
Dec 23, 2007I'm selecting a shirt, then I do a fill with new color. Only annoying things is I have to guess and fill then guess and fill.
way to do this and be able to see on the fly as the color changes in the shirt?
AutoCAD Inventor :: Find Pattern Overlay / Pattern Of Holes For Metal Floor?
May 25, 2012where could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies View RelatedAutoCAD Inventor :: Creating Circular Pattern Of Single Occurrence Of Rectangular Pattern
Mar 27, 2012How can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
AutoCAD Inventor :: Circular Pattern / Rectangular Pattern Features
Jul 25, 2012As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
AutoCAD Inventor :: How To Use Feature Pattern Select While Creating Pattern
Jun 29, 2013How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies View RelatedAutoCAD Inventor :: Create A Pattern Off A Feature In Another Pattern / 2013
May 31, 2013Is it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies View RelatedIllustrator :: Create Seamless Pattern Bigger Than 9x9 With New Pattern Tool In AI6?
May 26, 2012I played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedPhotoshop :: How To Add New Pattern To Preexisting Pattern Set
Jun 12, 2013Well, the title pretty much says it all... if you have a pattern set that you've already created, how do you continue to add new patterns to it while keeping those already there? I'm going to end up with a few gazillion of them because I do texture maps in Poser. So I HAVE to be able to keep adding new patterns to the Plaid Set, the Polka Dot Set, the Purple Monkey set... But I can't find this info anywhere.
View 3 Replies View RelatedPhotoshop :: Filling In The Lines
Jul 5, 2009So my friend is making these designs on paper and i am tasked to put them into photoshop. The problem is when i scan them in they are patchy they look horrible. Is there a quick way to fill in the lines or do i need to find a better way to transfer drawings onto the computer such as a better scanner?
View 1 Replies View RelatedPhotoshop :: Filling In A Background
May 18, 2006I need to have a border of about two inches around my painting in the same color as the background of the painting. In the past, I've cloned the color out to my desired dimensions,
I want to open a new window in photoshop of the dimensions I need.... fill it in with the color of the background of the painting, move the painting into this new window, flatten it and print it out.
How do I fill the new blank document with the correct or close color?
Photoshop :: Filling A Shape
Nov 22, 2006This is a basic question as I am a novice with both Illustrator and Photoshop. I have a vector shape of an apple in Illustrator. It is 2 piece- the body and the stem. I would like to fill this shape with a part of a photograph.
I'm wondering if I should do this in Illustrator or should move it over to Photoshop as a selection and then do it there? I'm also going to bevel the edges of the shape.
The next question is how to do it, which tool should I be using in either program? Is this considered a "fill" operation or am I cutting this shape out of the photo?
Photoshop :: Filling With A Texture
Nov 21, 2006I'd like to select a section of an image and then fill it with a texture from another image. For instance, I could add bark texture from a tree to a section of a face. I'm not sure how to select a texture from one image and apply it to another.
View 1 Replies View RelatedPhotoshop :: Filling With Patterns
Aug 3, 2006I created a pattern of concrete block coursing that I want to apply to a picture of the side of a building. The pattern is clipped so that it will repeat appropriately when filled into a large area. The problem is that depending on where I fill in the canvas, the pattern never fills in with the same start point. I want it to always start at the bottom left corner of the pattern (which is the bottom left corner of a block). Is there a way to set the point that a pattern moves out from? Also, does the pattern radiate from its center point or one of the corners?
In Autocad there is a snapbase command that lets you choose the start point for a pattern. This is exactly what I'm looking for in photoshop.
AutoCAD Inventor :: Pattern Component - Associated Feature Pattern
Jul 31, 2012I am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
AutoCAD Inventor :: Pattern Won't Update Unless Edit The Pattern?
Nov 20, 2013I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View RelatedIllustrator :: CS6 Pattern Maker Cannot Save Non-grid Pattern?
Jun 23, 2012I love the new Pattern Maker in CS6, but I keep running into a problem:
When I create a pattern that is NOT tiled in Grid (i.e. Brick), it usually works without any problem. But once I save and re-open the file, opening the pattern in PM again will show this message:
A clipping mask was created around the pattern tile bounds to preserve legacy pattern appearance. For best results, release the clipping mask when changing the tile size or editing art that overlaps the tile edge. I would then find that, instead of a single motif layed out in a Brick tile, I would have one complete motif in the center and four quartered motifs on the corners of one clipping box. This is tiled in a Grid pattern to emulate a Brick appearance.
So long story short, what's supposed to be a Brick tile turns into a Grid tile that's faking a Brick tile.
Is there a way to keep the simple Brick tiles?
Photoshop :: Filling Paths With Color In CS4
Jan 29, 2013I am working in Photoshop CS4...have been for years. All of a sudden, when I try to fill a closed path with a color, it fills the entire art board with color, except not inside the path. I have not selected "inverse" or anything....and it has never done this before....I can't figure out why it has started doing this, and I can't get it to stop. Most of the paths in my file, I have made in Illustrator and then pasted into Photoshop...they work normally....it is just the ones I actually draw in Photoshop that are doing this....one thing I have noticed is that in the paths palette, the paths I pasted in from Illustrator have a grey background.....while the paths I actually drew in Photoshop have a white background.
View 4 Replies View RelatedPhotoshop :: CS4 - Filling In Pre-printed Certificates?
Oct 8, 2012I've used Photoshop CS4 for sometime but I'm no expert!A club I'm in has asked me to fill in pre-printed membership certificates with members names etc. The only way I can think of for doing this would be to scan the certificate and call it layer
1. Then fill in the new details and call it layer 2.I then remove layer 1 and layer 2 is in the correct position for inserting the certificate into the printer and printing on it.Of course this is just my theory, how to even try it!
Photoshop :: Filling With Transparency Instead Of White?
Aug 14, 2013every time that I want to expend my picture resolution I using the crop tool and make the photo bigger but PS filling the new area with transparency instead of white. How can I set it to be white by default ?
View 2 Replies View RelatedPhotoshop :: Filling In Colors To Letters Like (O)?
Feb 27, 2011how can fill in colors to letters like O etc .
I have written something in text form in a simple font.
now I just need to fill some colors to the spaces inside the letter O how can that be done.
Photoshop :: Filling Object With Images
Feb 14, 2012I'm after a little info on an issue that I currently have with Photoshop. I want to make a logo that's filled with images but maintains an overall shape,for example, a outline of Australia that's filled with approx 15 images all combined but does not go outside of the overall Australian shape, would also like the outer images to bend and follow the outline without it looking"boxy".
View 4 Replies View RelatedPhotoshop :: Colouring Or Filling An Arrow
May 1, 2006How do you give an arrow a colour of if it is big enough fill it with a colour.
View 6 Replies View Related