Photoshop :: Font Troubleshooting For PS 7 Mac User
Feb 13, 2007I am using PS 7 on OSX Tiger and I can only see and use a small portion of the many fonts.
I have in PS.
I am using PS 7 on OSX Tiger and I can only see and use a small portion of the many fonts.
I have in PS.
PSE 11 is out and i have downloaded the trial.
Is there the option to change the UI font in PSE 11 - i can not find an option, despite this UI problem being around for at least PSE 10 and PSE 9......
If no UI option in PSE11 - WHY?
I find the default interface in CS6 difficult to read as the menu/tool labels seem very small to me. I can manipulate via Windows, but then the fonts in the windows of all my other apps are too big.
Is there a way to change the size of the fonts in labels in the user interface within Illustrator itself? I thought there used to be a way in preferences some where, but that was a long time ago - maybe even pre-CS?
I'm building a script that will open a dialog box allowing the user to select a font family from a drop down list (not a list of all of the fonts), and then compare that value against the fonts that are in use, highlighting everything that doesn't match. I have not yet built the dialog, but I've got everything else working as I want except the list of font families.
The following code loops through the list of fonts (only 20 for testing purposes), compares the family name to the previous on the list (error trapped for the first loop), and pushes the family name (if it doesn't match the previous) into an array which will be used in the dialog box. With the two alerts at the bottom (for troubleshooting), I expect the alerts to show the same family name. For the first three fonts they do, but after that the array value is "undefined."
var iCount = 20;
//var iCount = textFonts.length;
var nameHolder = "";
var nameArray = new Array();
[Code]...
Questions:
1) Any speculation on why this behavior is happening (it isn't truetype versus opentype)?
2) Is there a better way to get the list of font families without duplicates??
2) Is an array the best way to populate a dropdown list in a JS dialog box??? [this will be my first dialog with a dropdown, the others have user-typed values]
EDIT: Additional Info
When it reaches the ninth font in the list, the above script starts writing undefined, but when tested manually, as below, it works fine. Hmmm.
alert (textFonts[9].family);
var nameArray = new Array();
nameArray.push(textFonts[9].family);
alert (nameArray[0]);
EDIT: More info
tried replacing nameArray.push(familyName); with nameArray.splice(i,0,familyName); bad behavior remains
After getting Vault installed on our server and successfully setting up users and connections, I used the Library Transfer Guide to move our Content Center (including custom) to the Vault. I then changed the Inventor Application Options -> Content Center -> Access Options to Autodesk Vault Server.
This seems to have worked, as I can Place from Content Center when in an assembly, and it is pulling standard content as well as our custom files properly from the vault. However, in the instructions that I used for the installlation, it was suggested to stick with a standard folder structure within the Vault, namely two Library Folders named 'Content Center Files' and 'Libraries' and also a regular folder named 'Designs'.
I created those folders prior to transferring the library, as I thought they would be populated with the standard/custom content. This was not the case and I am curious when these folders come into play? *they are empty*
Also, today I will be attempting to 'Check In' a project to the Vault that I recently completed; does this usually maintain structural relationships between files?
Would you recommend using a single project structure in vault for two people? It seems, since we won't be working on the same project at the same time, having a single project would not be relavant to our situation..
Inventor 2011 / Windows 7 Pro SP1 64bit
Dell Precision T3600
Intel Xeon E5-1607 @ 3.00GHz
AMD FirePro V4900
20 GB Ram
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI'm using Photoshop CS5. How can I replace all instances of a missing font with a font of my choice?
View 2 Replies View RelatedFont is fuzzy no matter what font type I choose, why is this happening? Using Photoshop CS6.
View 1 Replies View Relatedmy font is so small and its font size is at 72pt how can i make it big again
View 5 Replies View RelatedWhen I make a text, and if I like to change the font style how can I do this with out having to click on the new font,
every time I choose a different font I have to click on that font, and if I don't like I have to click on a different one
I like to do it like in Flash MX I move the pointer over the list of fonts and may text change the font style with out click on it
I've a problem with "DWGtoPDF"-Plotter of Acad2013. I give the textstyle "arial" in Acad and plot it to PDF. In the PDF-Sheet i see the Fontname "ArialMT" in the document-options. I want to give the PDF's away and fear, that he gets an error while opening.
View 1 Replies View RelatedI want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View RelatedAfter opening a file from another designer, this Chinese font has taken over my "omens – regular" font file. Anytime I use it, it converts to this font and each time I need to change a font weight, I must do it manually. As you can imagine, I use our company font all day so this slows me down quite a bit. Have you heard of this? It seems like some sort of font virus. I've researched removing it, yet can't seem to find the original font file to get rid of, which is even weirder."
We tried moving the font family to the trash, emptying the trash, rebooting the machine, and re-adding the font family and it still is happening.
I had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.
So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?
I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.
Is there a way to specify a given system font that should be substituted for a given missing font? For example, the document I'm working with contains CourierStd and CourierStd-Bold which are not installed on my system. I would like to set Illustrator so that any time a document that contains these fonts is opened, Courier New and Courier New Bold are substituted automatically.
View 3 Replies View RelatedAn eps file opens without any problem with the preview as .pdf on Mac OS 10.7.5In illustrator when I open the same file, the main font is not recognized and no warning said the font is not available.
View 7 Replies View RelatedI'd like to replace all occurrences of font A with font B in my Xara document. Can this be done is a more efficient manner than by hand?
View 3 Replies View RelatedI'm sure this is a ridiculous question but I'd still like to find an answer. I have just noticed that neither Photoshop CS6 nor Lightroom 5 displays the licensed user name on either the opening splash screen or the Help/About screen. Unless I'm completely mis-remembering they (or perhaps previous versions) used to do so on one or the other screens.
View 2 Replies View RelatedIn the latest issue of Photoshop User magazine (Sept 2004), a couple of PST members are mentioned.
In a feature article on ACE certification, jonbalza (Sir John) and Ammaro (Sir Ammar) are quoted on their experience with ACE.
I want to change the user interface into Japanese? Where can I download the language pack?
View 2 Replies View RelatedI typed in my code or Keygen, what ever you might call it, another screen comes up, which is the User Agreement, I read it all to make sure i do really agree, and I do, I hit accept wait for at least 4 minutes, nothing else happens. Need help, Thanks. This is the first time i used it. By the way this is for PhotoShop CS4 on Windows Vista Home premium.
View 5 Replies View Relatedtwo of my colleauges opened a photoshop file at the same time and both could make changes. Saving the file kills one person's changes, which actually shouldn't be possible. How can this be avoided?
View 4 Replies View RelatedOne user can not print from Photoshop CC. I have test other users from the same computer and they can print.I use Windows 7 Ultimate and SBS 2011.
Is there a way to clear all Photoshop CC from a user profile? it must be the first try. Any other user related problem with printing in Photoshop?
Photoshop is THE ONLY application that's missing the sweet slider to darken/brighten the user interface. I just discovered that even Illustrator CS4 has this ability, Premiere does, After FX does, so, what's the point? Why can't I darken Photoshop a bit? I think it's a bit more crucial to darken the UI in Photoshop than it is in Illustrator, as you're more likely to perform very sensitive color corrections in Photoshop and anything bright stands in your way,
View 8 Replies View RelatedA friends wants me to reinstall his windows but before i do that he wants me to backup all user changable files of his Photoshop CS, but im not really into PhotoShop so i dont know all the files, can make a list of some files that store the settings and the brushes and stuff?
View 6 Replies View RelatedAfter discussions with the council members I have disabled the User Reputation system.
It had a behind the scenes feel that I didn't like. I think that reputations should be built in public, in view of all.
I am starting a website from a template.
The template has two user input box (User and Password). I did all the
design modifications to the template, but when I want to save it for
web, both user input are only images, and the user can't write anything
on it.
New to Photoshop and was given v.7 as a gift, I'm trying to add text to a signature I'm makeing but when I select type tool, drag a text box onto my frame I can see any text/type. The box is there but I can't see what I'm typing? the top left corner box flashes and it looks like there are tiny characters in there, although without a magnifying glass you would never see it? how do I add text to my frame?
How can I get a "user guide" for Elements 8?
View 6 Replies View RelatedThe attached drawing has two bits of text that are identical except from the font style.
They look different.
What is the difference between 'Regular' and no font style.
How do I acheive the 'blank' font style instead of Regular?
if there is anyway to install extensions into adobe products using Extension manager without the user being prompted, I have CS6 installed.
View 1 Replies View Related