Photoshop :: Font 2 Path
Mar 18, 2004I thought there was an option to write text as a path, but I cant find it. How do I change fonts to paths? Its because I need 2 distort and manipulate a font.
View 6 RepliesI thought there was an option to write text as a path, but I cant find it. How do I change fonts to paths? Its because I need 2 distort and manipulate a font.
View 6 RepliesI am facing some really small, but really bugging problems...
1) I have Photoshop CS and the new fonts that i installed on my win xp fonts folder in control panel, simply wont show up in my photoshop. can someone figure out the reason why and how do i fix it?
2) While defining paths, when you right click to "stroke path", the option (Stroke path) simply remains inactive no matter what! Heres how i actually go about it.. i had made the dotted brush already. So what i did was.. Code:
When I convert a font into outline stoke its converted into double path.Still I hadn't get single path in Illustrator, InDesign & Photoshop CC too..
View 14 Replies View RelatedI tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI'm using Photoshop CS5. How can I replace all instances of a missing font with a font of my choice?
View 2 Replies View RelatedFont is fuzzy no matter what font type I choose, why is this happening? Using Photoshop CS6.
View 1 Replies View RelatedWhen creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View Relatedmy font is so small and its font size is at 72pt how can i make it big again
View 5 Replies View RelatedI'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View RelatedI'm trying about 8 hours to convert a Photoshop shape in to a working path in order to put a brush border around it. I don't understand why the "stroke path with brush" is grayed out and not usable directly on the shape path itself.
"Load path from selection" is not an option because it deforms my path.
I want to be able to transpose the perspective of the existing image to my new 3D prism shape.Why can't I create a path.. and then drag nodes on that path.. and warp the pixels at the same time???
It shouldn't apply to just 3d.. because I should be able to draw a rigid path around anything and warp / stretch the image from those points.
When I make a text, and if I like to change the font style how can I do this with out having to click on the new font,
every time I choose a different font I have to click on that font, and if I don't like I have to click on a different one
I like to do it like in Flash MX I move the pointer over the list of fonts and may text change the font style with out click on it
Having made a (ex circular) closed path within a (ex square) path, I want to turn this into a selection in which the inner circle is omitted from the selection. But when choosing "Make Selection", only the first option,"New Selection" is available, the other three are grey (Add to, Subtract from and Intersect).
This used to work in CS7,
I'm wasting time having to place my image in Illustrator then manually line up the clipping path. You used to be able to save a file with a clipping path as an EPS in photoshop, select "retain vector data", place in illustrator and hit cmd Y to see the clipping path. I need the image and the clipping path in Illustrator and the image is too complex to create a mask in Illustrator. I tried to save it as an EPS but "retain vector data" is grayed out.
View 2 Replies View RelatedI've a problem with "DWGtoPDF"-Plotter of Acad2013. I give the textstyle "arial" in Acad and plot it to PDF. In the PDF-Sheet i see the Fontname "ArialMT" in the document-options. I want to give the PDF's away and fear, that he gets an error while opening.
View 1 Replies View RelatedI want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View RelatedAfter opening a file from another designer, this Chinese font has taken over my "omens – regular" font file. Anytime I use it, it converts to this font and each time I need to change a font weight, I must do it manually. As you can imagine, I use our company font all day so this slows me down quite a bit. Have you heard of this? It seems like some sort of font virus. I've researched removing it, yet can't seem to find the original font file to get rid of, which is even weirder."
We tried moving the font family to the trash, emptying the trash, rebooting the machine, and re-adding the font family and it still is happening.
I had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.
So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?
I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.
Is there a way to specify a given system font that should be substituted for a given missing font? For example, the document I'm working with contains CourierStd and CourierStd-Bold which are not installed on my system. I would like to set Illustrator so that any time a document that contains these fonts is opened, Courier New and Courier New Bold are substituted automatically.
View 3 Replies View RelatedAn eps file opens without any problem with the preview as .pdf on Mac OS 10.7.5In illustrator when I open the same file, the main font is not recognized and no warning said the font is not available.
View 7 Replies View RelatedI have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedI have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedI have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
Actually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
I have a bunch of material libraries that need to be re-pathed as I have moved my textures, the Bitmap/Photometric paths editor has a tickbox that says "include material library" which leads me to believe that it will list, for re-pathing, all materials in my library.
However, it doesn't seem to do anything for me even though the library i need to re-path is loaded into my Material/map browser.
I am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database;
using (Transaction Trans = db.TransactionManager.StartTransaction()) {
BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true);
db.ResolveXrefs(false, false);
[Code] ...........
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedI accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedWhy the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?
View 2 Replies View Related