Photoshop :: Fixing Discolored Areas On Clothing
May 23, 2012I have a photo with a man that's wearing a blue polo and there is an area on his right shoulder where some of the shirt is discolored.
View 2 RepliesI have a photo with a man that's wearing a blue polo and there is an area on his right shoulder where some of the shirt is discolored.
View 2 RepliesUsing Photoshop CS3 on Windows XP
Any documents opened in Photoshop have a yellow tint to them. Even new blank documents have a sick yellow overtone.
All other Adobe products including bridge display documents correctly, and all menus/panels in PS are shown correctly. The color problem is strictly within documents in Photoshop.
I've attempted to change all the color settings (RGB modes, Conversion Options, etc.) in several documents with no change. I've also closed Photoshop, located my .ICC and .ICM files in "program files/common files/adobe/color/", renamed the "Profiles" and "MPProfiles" directories and restarted Photoshop. Did not change.
I'm using ACER and LG monitors, which both seem to display everything else properly but both are showing the yellow tint on the PS docs, although the ACER (being a brighter monitor) shows more yellow than the LG does.
how to achieve this sort of look with a Canon DSLR and photoshop..There seems to be a lack of complete black and white in either of the photos. i see the discoloration and everything, i just need to know what i can do to achieve this sort of effect.
View 2 Replies View RelatedI'm using Bridge 5.0.1.23 x64 via Photoshop CS6. I'm processing some low-light nighttime photos that require me to boost the "shadows" slider most of the way to the right to get the look I need. I've noticed that the previews in Bridge look pixelated and purple in all of the shadow areas.
View 10 Replies View RelatedI'll make the important parts bold.
View 3 Replies View RelatedWhat is the difference between rooms and areas? Why create an area schedule off 'areas' as opposed to using 'room' areas? Can you create a schedule off room areas?
View 2 Replies View RelatedIn the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies View RelatedI have a drawing (autocad 2011) ,which i have to measure the areas of the many rooms and i arrange these areas in a table! is there any fast way to do so? avoiding the boaring typical area measurements room by room?
View 9 Replies View RelatedI am looking for a couple of plugins that can help me add texture and draping effects to my clothing designs, which at the moment don't even look 2D. Am looking also for something that will help me design and implement patterns, such as checks with out having to copy and paste. The easier to use the better as I do not know Photoshop CS that well.
View 6 Replies View RelatedI m using Photoshop to work on clothing textures and later import them into Second Life.Most of the time I use Dodge and Burn tool to create the effects on clothing. I believe there are other methods to create verry good looking clothing such as this picture shows (please take a look only at the pants and the effects) What else (or methods) can you use to create such great (wet)look? Thank you for the upcomming help and advice. The exact version of the Adobe Application you are running.Photoshop CS4Your Operating System details.Windows XP SP2Amount of installed RAM.2 GB DDR 2 RamAmount of free disk space.about 300GBMake/Model of Video Card.NVidia GeForce 7600GSÂ 256Mb
View 2 Replies View RelatedI've done many many searches for this type of effect, but I haven't had much luck. I'm trying to create a sequence of images of ripped clothing. As in the Incredible Hulk, busting out of the clothes.
In the past I've used the smear tool with different shaped brushes, but that doesn't really do it too well.
How to change the color of the dress.
View 3 Replies View RelatedHow to be able to change the color of a tie in a photo for me? From black to a kind of aqua blue if it is possible?
View 9 Replies View Relatedit is possible to custom clothing for 3D Daz models using Adobe Photoshop CS5 Extended? I can find tutors on painting models but nothing on making the custom clothing itself, not a texture for other clothing but making my own clothing for DAZ Kids4. I have been using Hexagon to work with clothing but was looking for a photoshop alternative method.
View 3 Replies View RelatedI am trying to change the color of some clothing from black to a tan or gray.  I have seen tutuorials that use a hue/saturation layer mask to accomplish this task. But I find that with black clothes nothing happens when I change the hue. I assume this is because of the black? At any rate, what is the best way to turn something from black to another color?
View 5 Replies View RelatedColours are being over saturated in shaded areas and less saturated in light areas when filled over an aeea. The colours need to remain the same saturation level when darkened or lightened. Is a setting affecting the saturation levels?
View 12 Replies View RelatedI need to batch texturize a ton of image with a clothing fabric I have loaded to get the look I need. I now how to batch image but can't find a way to use the batch image with texturizer and a texture I have loaded. Can this be done? If so, how?
View 2 Replies View RelatedI do not know how to properly create clothing seams using the line tool. Every time i try they just so not look right, just messy lines.
View 8 Replies View RelatedI have been using Photoshop for a while now but have recently been invited to design some sportswear. I want to initially take existing clothing and change the colours and add designs. As an example, how would I get this soccer kit to be either all white or white on everything apart from the shorts?
I have managed to get yellow to go white using the hue/saturation tool but dark colours seem like its impossible. I do also want to know how to go from white to a darker colour but maybe I should save that for my next thread.
I have received a new logo from our brand developers. The spec is
C - 0
M - 98
Y - 75
K - 22
Â
or Pantone 1805
Â
or R - 191
    G - 49
    B - 26
Â
I get a different colour depending on which spec I use, and if I sample a digital document, a fourth variation on red. Am I just not understanding these colour specs? I want to be able to reproduce the logo on printed documents, and use it for embroidery on clothing. I also need to produce adobe pdf files and jpegs to email copy to advertisers.
I,ve got an old photo of the ship my dad sailed in during WWII and i'm trying to fix it up a bit. here is the original and a small copy of what I have done so far.
View 9 Replies View RelatedMy mother has a picture of herself with singer Ed Ames that was taken quite a long time ago. The problem is, the lighting was horrible at the airport they were at and the picture turned out pretty bad. I'm no expert in Photoshop, but I do know my way around it pretty well- the problem is I don't know if there is any hope to bring out features in Ed's face.
This picture might be a lost cause, but if any of you think you know how to make the picture better,
I have attached a section of a picture that I am currently working on. I have been trying to get rid of some green and red pixels that are all over the picture. You can better see them in the hair and neck area.
The original file has a decent size and is 300dpi.
I have been trying to use the clone tool, paint over the hair but it just doesn´t look right.
way to get rid of the glare in this picture?
View 4 Replies View Relatedtrying to take good pictures with a crappy camera, but was wondering if there was any good way to fix these glare issues. i know you can't simply take a glare out,
View 1 Replies View RelatedI just scanned a transparency in my EPSON 2450. It came out with some curves like a rainbow, I don't know how it is called. Is there any way to remove that without affecting the texture of the photograph? (these curves show over a piece of fabric and I really wanna keep the texture of the fabric).
View 2 Replies View RelatedI have pictures that look like legos almost. I can only assume this is due to jpeg. How do I get rid of that lego look. I am working with photoshop CS2.
View 4 Replies View RelatedI've got are some scans of some drawings I've made and I'd like to get rid of a few blemishes. First of all, a few of them have some really ugly creases where they've been folded. How can I get rid of those? Second, some of them were too big to scan all at once and I had to connect several scans together in one JPEG. The borders between them are obvious and I'd like to know how to smooth them over so it's not so obvious that the whole was put together with several pieces.
View 2 Replies View RelatedAlright, so I'm trying to import a checker pattern onto my drawing for clothing decoration. The first time I did it, no problem, but now when I try to import a layer it doesn't work the way I want it to. When I try to erase parts of it, instead of being transparent, it erases away white. (See attachment) How can I fix this?
View 1 Replies View Relatedhow I can fix some lens flares photos in photoshop, I took out some picutres and the shutter speed was too low. So the lights in the pitcures looks like lens flares.
View 5 Replies View RelatedI took a new Canon DSLR camera on a family trip to Africa and managed to take some very blurry photographs in the Kruger National Park. I understand that there is an "Unblur" feature available in one of the Adobe products but have been unable to find out if it is in Photoshop or Lightshop and which version.
View 1 Replies View Related