how to mess with text to make them look like this (collegue need to make translated book cover) I suggested to use Displace but it's tricky...need to find proper background etc. Maybe there is some PS or Illustrator filter or filter group which applied gives such effect?
View 3 RepliesAfter applying a filter to a layer how do you remove it? Currently I have applied color halftone however I want to remove it but can't find how to.
View 1 Replies View RelatedWith Photoshop CC, when editing a video and adding a "Camera Raw Filter" to some video layer, the effect will be applied only to one frame and not to the whole video layer.
Should it not add that filter to the whole layer (e.g. all frames in that clip)?
When I go to open photos - they are opening in blue-green-purple colors as if a filter is being applied. The color pallette is also appearing with the same blue-purple colors. In the layers pallette - the icon of the image appears in the normal colors and no filters, etc. have been applied. It's all starting from when selecting the photo to be opened in photoshop.
View 1 Replies View RelatedI tried to use the lens flare filter in Photoshop CS6.While the lighting effect is interesting, it introduces ugly artifacts like blue or orange blobs (which are supposed to be the reflection of the diaphragm, but do not look anywhere close to that, but instead are just cheesy looking blobs of color).
In the "movie prime" setting blue lines are added which have nothing to do with lens flar.On top of it, the preview is about the size of a stamp. Any way to use the filter without getting these artifacts, or is it - what I assume - just a useless toy filter, that has probably been dragged on for years and years because it's always been there? What do you use to create a lens flare effect? Are you just building it from scratch with brush work?
Can a filter be applied to just part of clip instead of the whole clip? I mean a way to easily adjust when a filter starts during the clip and when it ends. I'm not interested in anything involving splitting a clip because you really can't try out different start and end times simply this way. I thought about doing it by adding keyframes, but the few filters I've tried can't be turned off completely and leave residual effects that can be seen.
There's an editing feature in AVS Video Converter and you add effects to a video clip on a separate timeline just below the video timeline, and it's easy to move the effect on the timeline and you can change the length of the effect by dragging the ends. Is there something similar in Videostudio?
Using Illustrator CS6. Created type and applied an effect (Graphic Pen) and the yet I could not get it to do anything but come out as black. How do you apply color to the effect?
View 2 Replies View RelatedAn Area Text Object is created...
the Transform Effect is applied to it (a rotation).
The text rotates, but the fill disappears...
whether it's the original object or if copies are added.
I'm working on a portfolio site and want to apply a desaturation/black and white adjustment just to one group, instead of having to individual adjust every image. However, whenever I do so, it applies the effect to the entire background of my image. Is there a way to do this?
View 1 Replies View RelatedI've been using AutoCAD since R14 and I've never had this problem. Recently installed 2013 as we upgraded from 2012 and started using a license server instead standalone licenses.
I like to setup a specific Group Filter (among others) that has my most used layers (for example centerline layer, hidden layer, paper layer, etc.). I create the Group Filter and label it "EN Layers" (Entertainment Layers). I then populate it with the aforementioned layers and layer "0". Now if I want to create a whole new layer and have it be part of the group filter (EN Layers), I used to be able to select the "New Layer" button in the "Layers Property Manager", have it create the new layer in the currently selected group filter, rename the layer and it would appear in the group filter.
As of recently, when I create the new layer in the group filter and rename it, I can see the name as I type it, but when I hit enter to save the name, it defaults back to Layer1 and saves the name as that. If I immediately create another layer inside of the group filter and rename it and press enter, both layers are updated with the names I typed. It seems like the "Layer Properties Manager" isn't refreshing fast enough.
I need to move some layers in a new group filter as you can see on the picture:
layer.PNG
I am working with a lot of layers in PS and frequently I need certain adjustments to affect each transparent layer in the group without affecting any groups underneath. Is there a way to do so without resorting to masks? In other words is there a way to group adjustments with particular groups rather than with particular layers?
View 9 Replies View RelatedI have determine that my AutoCad 2009 will allow me to drag/drop layers to an existing Group Layer Filter, but it will not allow me to right click on the Group Filter>Select Layers>Add. Once I go to the model space an select layers then "enter" no layers are added to the Filter Group and it gives me an error message that says "unable to modify layers while another command is active".
View 0 Replies View RelatedWhen applying certain SVG filters to a group that contains an object with an opacity mask, that masked object disappears. AI_Dilate_3, for example.
View 1 Replies View RelatedWhy my AutoCad 2009 will not let me select new layers to a specific group layer filter. It was working just fine and yesterday all of sudden it will not let me add new layers to a specific filter. Is there a button or command that maybe would have changed that function. Everything else seems to be working on the Layer Manager.
View 3 Replies View RelatedI use a lot of Group Layer Filters so I can turn things on/off quickly. My problem is I have been creating my Layer Filter Group by right clicking on the Layer Group Filter>going to Selection>then click Add> then go back to my drawing or Layout tab and select all of the layers I need then click enter. One day my AutoCad would not let me do that anymore, and even after I click on enter it gives me an error message saying the command is still active. Now from my Layer Properties Manager I can select any layer and drag/drop it into any filter and it works, but I really need to be able to select things within the model space or paper of each layout tabs.
View 0 Replies View RelatedIf I bring a raster image into Illustrator (CS5.5) and apply an Effect (Angled brush stroke) will the resulting image be a vector or raster?
View 4 Replies View RelatedFor example if I use Watercolor filter for a big size image (ex: 6000 x 8000), the paint strokes are too small. Is it possible to increase them?
View 2 Replies View RelatedI want to apply some filter to peoples portrait to look like old pictures, (like picture, when is taken trough steamy window or something).The video film producer use this effect when they want to present some scene from the past.
Is any plugin filter for photoshop?
I have a picture of a face and the background is water. I want to make a water face and to do that i need to make a water effect out of the face. "Plastic wrap" is a nice filter to use. I select the face and applying the filter, but the filter is now "in" the face (merged), but i want the plastic wrap filter to be in a new layer so i can disable the face and have the water-face effect and the background left.
How do i do that? If i make a new layer above the face and applaying the filter, i get a error because there wasn't any pixel to use.
Win 7 OS. I am trying to use the light effect filter and when I select it photoshop gets locked up and won't respond until I end task in task manager (it says photoshop not responding in task manager). Is there a fix for this? I did all of my updates and it still happens.
View 2 Replies View RelatedThe lighting effect filter does not respond in CS6. I am on a pc with window 7 64 bit. I have 10 gig ram memory with a ATI Radeon HD 4350 graphic card.
View 4 Replies View RelatedI am using photoshop CS and im trying to use the Filter --> Render --> lighting effect but it is grayed out and I can't use it, as well as the lens flare effect.
View 2 Replies View Relatedi have a bit history of 3dsm5 and psp, 2 weeks ago i started with PS and I love it very much so far, but I have a problem that's bugging me were i can't get around.
When I want to apply the filter "Wind" effect then this effect goes inwards into a layer, and i want it to go outwards.
I'm looking for a filter to add an cloth/drapery look to pictures. Does anyone know a good filter for that?
View 9 Replies View RelatedHas anyone out there had experience with creating a cross star filter effect using PS7? I realize that in an ideal world the effect would be created on the camera lens, but who lives in a perfect world? Photoshop allows us to turn our imperfections into perfections. I would like to create a 4 point and a 6 point cross star effect, but am clueless on were to start.
View 1 Replies View RelatedI've read all over that the filter only works with an 8bit/RGB file, which my file is, so I don't understand what the problem is. I am attempting to light a smart object (3d bevel and extruded text) that I created in illustrator, and thought that I might just need to rasterize the smart object before the filter would work, but even after I render it and or flatten the image, merge visible, I still don't have the option to use lighting effects!
View 2 Replies View RelatedI"m using photoshop cs5 and the liquify filter dosen't show any effect until after I've clicked ok. I've checked, and unchecked "show backdrop" and the opacity is set to 100%.
View 1 Replies View RelatedSuddenly while working on may images in LR5, doing all the usual with Development module I've realised that Radial filter effect is not being exported to CS5; all others ark: healing, spotting, grad filter, and brushes are ok.
View 3 Replies View RelatedI was messing around the other day and I came up with this effect. In my haste to get something done I just saved the picture and moved on. Unfortunately now I am unable to remember the name or location of the effect I used. I am not sure if it is a filter or not. I am sure this is just a silly little thing and I am being dumb, however I have gone through every menu and every filter and I can't seem to figure it out. This image I believe I had inverted and maybe changed the color layout a little bit, but the effect changed both color and style.
View 6 Replies View RelatedI'm intermediate (at best) with Illustrator. I'm using CS6 on a 2009 iMac. How to make Illustrator ignore stroke weight/cap/join settings when I'm applying a live rotate/multiple copy effect on a group of paths? Currently, Illustrator sets the rotation point to the outermost part of my stroke (figuring in the strokes atrributes), but I only want it to calculate the from the path's structure: the coordinates of my designated anchor point.
Here's the top/right group of paths with a rotate/ 3 copies effect of 90 degrees. Looks problem-free at this view.
Here's that top/right group of paths with the addition of a reflect/ 1 copy effect of X-axis. Still no apparent problems.
But here's a close up of the misalignment of corner points. As shown, the Transform effect is based off the strokes attributes (the tip of its corner), not the actual location of the corner point.
It does not apply different cap/corner styles or stroke alignments; that only slightly nudges the pivot point to the center.
Plus, this one point stroke is somewhat arbitrary. I only set it so in order to see my dynamic effects.
Tweaking the vertical/horizontal moves effects of the rotated/copied elements won't support because this art will later undergo lots of alteration, mostly changes in stroke weight (maybe even variable stroke width).
I need the skeleton of my structure to snap together precisely.
Any solution, no matter how roundabout, would save this project!