I have determine that my AutoCad 2009 will allow me to drag/drop layers to an existing Group Layer Filter, but it will not allow me to right click on the Group Filter>Select Layers>Add. Once I go to the model space an select layers then "enter" no layers are added to the Filter Group and it gives me an error message that says "unable to modify layers while another command is active".
View 0 Replies
I use a lot of Group Layer Filters so I can turn things on/off quickly. My problem is I have been creating my Layer Filter Group by right clicking on the Layer Group Filter>going to Selection>then click Add> then go back to my drawing or Layout tab and select all of the layers I need then click enter. One day my AutoCad would not let me do that anymore, and even after I click on enter it gives me an error message saying the command is still active. Now from my Layer Properties Manager I can select any layer and drag/drop it into any filter and it works, but I really need to be able to select things within the model space or paper of each layout tabs.
View 0 Replies View RelatedI routinely add paths to existing Live Paint Groups, by dragging a path that is outside the group, into the LP group. But AI won't let me drag the "selection icon" from a nested layer, into an existing LP Group. Why?
It seems I'm requesting the same action, but AI won't allow the icon to be dragged into the group. I have to either open the layer and drag the objects directly, or drag the objects into the main layer, then into the Live Paint Group. I think this is an interface flaw.
FYI… I realize I could jump into the Live Paint Group using Isolation mode, but that takes extra steps and makes the template less useful.
I'm trying to drag and drop a layer in stack.... nothing happens.
View 4 Replies View RelatedI wanted to drag a selection of objects (that are on different layers) and just cut n' paste them onto one layer (effectively merging them).
View 7 Replies View RelatedWhy my AutoCad 2009 will not let me select new layers to a specific group layer filter. It was working just fine and yesterday all of sudden it will not let me add new layers to a specific filter. Is there a button or command that maybe would have changed that function. Everything else seems to be working on the Layer Manager.
View 3 Replies View RelatedThought I'd force myself to use CS6 on a new project. I want to select multiple objects using "Option-drag", in the Layer Panel, but it doesn't work as it does in CS5.
Is there a different shortcut for selecting multiple contiguous objects using the Layer Panel, in CS6? Of course, I mean "Select" not "highlight".
In PS i can Magic wand selection shape from one layer, drop to sub layer and copy that selected shape from that sub layer. How do I do this in illistrator, and moreover, from multiple layer at the same time.
For instance, in PS = Import an image of gold - select a text phrse with wand - drop to gold - copy paste = gold text.
One of my designers running 2012 AutoCAD and 2012 CADWorx, can no longer select individual parts of a GROUP by shift selecting the unwanted elements.
I have tried to modify..
Pickadd
Group
PickStyle
PickAuto
PickDrag
but to no success.
Also fiddled with her Options file, still nothing+
camera raw filter does not show up on the filter drop list on CC. I am trying to determine why this is the case. So far everything else seems to work.
View 2 Replies View RelatedI want to drag and drop a csv file containing some coordinates into autocad and the result to be dbpoints objects.
I know how to create a command to point to the file and to do this but I would like the command to be called when I drag and drop the file into autocad.
sometimes i like to insert image into a Dwg. In 2012 i use to drag and drop the image from the source folder to autocad screen then i had the insert instructions, scale, position etc.
But i can't drag and drop images anymore in 2013, i have to use _imageattach icon to open the open manager then select an image.
Is there a way to reactivate the drag and drop feature in 2013 ? Must be a Variable to autorise that.
I have a new computer loaded with 2012LT and have transferred the license from my old machine but the new program starts up in the default settings. I have a personalised workspace with numerous settings, including custom commands, which I do not want to have to recreate from scratch. I have tried renaming acadlt.cuix to acadlt0.cuix then copying the acadlt.cuix from the old machine but when I restart 2012 it has the same layout as originally.
Looking at cui import, it seems you have to drag and drop every item from the customized cui to the current cui.
I would like to use the behaviour of "drag and drop" into AutoCad (from a listbox in a form) at a specific point, I do not need to drop anything into AutoCad, I just need the exact point of the mouseposition converted to WCS in autocad.
the below code works, but i do not get the correct point in AutoCad.
Private Sub ListBox1_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles ListBox1.MouseDownDim ed As Editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor '---now i drop listbox-text in autocad, DoDragDrop(ListBox1.Text, DragDropEffects.Copy)Dim pt As Point3d = ed.PointToWorld(New Point(CInt(MousePosition.X), CInt(MousePosition.Y)))'---draw circleModelspaceAdd(Teken.Cirkel(pt(0), pt(1), 100))End Sub
(Maybe it is possible to just change the mouse-cursor, but it doesn't 'lock' the selected item in the listbox, as if it was dragged into the drawing.)
1) All of the computers at the office allow you to drag and drop blocks on the tool palette except one. You must go thru the Design Center to add blocks to the palette on this one computer.
2) Another tool palette question; a few of the blocks do not have an image on the palette, only the block name. They work just like the ones with images but a quick check of the properties indicates no difference. Why no image?
I have PDF images i.e road signs, is it possible to drag and drop from a tool palette.
At present i download an eps file of a sign, convert to pdf, then import in to DWG.
Can i make the PDF into a block...
Do i need to create a DWG of the sign and convert in to a block.
at present i am alittle lost with what to do... i am after a quicker way to reduce my time producing dwgs.
P.S at present i attach them as a JPEG
im used to opening up two drawings simultaneously, and i used to drag & drop entities with one another but for some strange reason i cannot do this drag & drop thing anymore with my drawings, i tried to use ccleaner to clean up the clipboard, tried searching it here and googling it but still cannot find any clue.
View 6 Replies View RelatedUsing Civil 3d 2011, I am trying to drag and drop styles from a template drawing to my working drawing. I drag the style into my working drawing and it acts like it is dropping it in my drawing put it never does show up in toolspace.
View 9 Replies View RelatedHaving issue in Inventor Pro 2014 with the factory layout/simulation add-on (factory design suite) where you can't drag and drop "out of the box" assets onto your factory floor?
When I drag/drop onto the factory floor, nothing happens and no message appears..
I don't need or want the drag and drop (DROPGEOM) command. I never use it because it is much slower than simply using the move command or grips. But some times when I am going faster than the computer I accidentally do it and then have to wait while it moves the object and then wait while I use undo to move it back. It can take a really long time if I accidentally move a large xref. So is there some way to turn off drag and drop of autocad entities?
View 9 Replies View RelatedI am creating new tool palettes for lab equipment blocks. I was able to create a new palette and drag and drop blocks into it. When I go to create other palettes I am unable to drag and drop blocks into them. I am able to drag and drop into the tool palette I previously created and then drag and drop into the new palette.
But when I shut off Autocad and reopen the new palettes disappear. How can I create a new tool palette and it works, then create other tool palettes and I can not drag and drop to it? I am using Autocad Architecture 2013.
We're testing some new machines running Windows 7 64-bit with both AutoCAD Architecture 2011 and 2012 64-bit installed.
When dragging and dropping a model space view onto a sheet, instead of the folder with paperclip symbol, we're getting a circle with a line through it prohibited symbol. This only occurs when our project files are on our network. When we use them on a local machine this does not occur.
We cannot drag and drop onto new sheets either.
[URL]
We are running on a Novell Linux Open Enterprise Server network. We previously had a problem with not being able to open any sheets if another drawing was open, which we resolved by disabling Novell File Caching. We are also now experiencing unhandled e06d7363h exception errors with any type of file access in the Project Navigator. This crashing also does not occur when the files are on the local machine.
how to "drop out" the background from this photo (I have loads to do which are very similar). Thus far I have tried channel selections and the calculations tool + all the normal quick selection tools and I just cant get it to work without spending hours adjusting things. The end effect I need to achieve is a perfect white background without loosing any of the detail if possible. On a side note I have also tried taking the photo on blue, green, black and white backgrounds but due to the number of colours present in the products its just not working for me.
View 5 Replies View Relatedi can't understany why photoshop won't allow me to drag and drop a gif file from its file to another new photoshop file...
View 6 Replies View RelatedI'm running Windows 7 here at work and I can't drag and drop scenes into the max viewport, or texture maps into the material editor or any sort of the dragging and dropping that I can do on my home computer or any of the other computers that run max here at work.
I'm using 3ds max design 2011, I'm running it as administrator and everything is up to date. I also can't drag and drop into photoshop, but I can drag and drop to the desktop and from one folder to another. So either both of my programs, on this computer only, had some setting disabled, or it's the OS. But like I said, I can drag and drop within Windows just fine.
I've been using AutoCAD since R14 and I've never had this problem. Recently installed 2013 as we upgraded from 2012 and started using a license server instead standalone licenses.
I like to setup a specific Group Filter (among others) that has my most used layers (for example centerline layer, hidden layer, paper layer, etc.). I create the Group Filter and label it "EN Layers" (Entertainment Layers). I then populate it with the aforementioned layers and layer "0". Now if I want to create a whole new layer and have it be part of the group filter (EN Layers), I used to be able to select the "New Layer" button in the "Layers Property Manager", have it create the new layer in the currently selected group filter, rename the layer and it would appear in the group filter.
As of recently, when I create the new layer in the group filter and rename it, I can see the name as I type it, but when I hit enter to save the name, it defaults back to Layer1 and saves the name as that. If I immediately create another layer inside of the group filter and rename it and press enter, both layers are updated with the names I typed. It seems like the "Layer Properties Manager" isn't refreshing fast enough.
Right-click drag on an object is a neat way of quickly cloning an object.
If you do this on an object that is part of a group (by using CTRL click to select inside first) then you see the clone of the object as you drag it but it disappears the moment you let go of the mouse button.
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI'm having this problem since the last time I formatted my computer. Basically, when I try to drag an image into photoshop, the cursors changes into a circle with a slash in it (unavailable).
I can open files by right clicking and choosing "Open with -> Adobe Photoshop CS6", and I can also open with "File > Open..." (ctrl+O)
I've searched for a soltion for this and nothing worked. This is what I've tried doing so far:
- Resetting the preferences (ctrl+alt+shift)
- Running with administative rights
- Running without administrative rights
- Making sure I have premissions for the files
- Making sure the files are not set as read-only
- Changing the scratch disk option (Preference -> Performance)
None of these worked.
Here are my PC specs:
OS: Microsoft Windows 7 Ultimate 32-bit SP1
CPU: Intel Core 2 Quad Q8300 @ 2.50GHz
RAM: 4.00 GB Dual-Channel DDR2 @ 400MHz
Motherboard: Gigabyte Technology Co., Ltd. G31M-ES2L
Graphic Card: 1024MB GeForce GT 240 (nVidia)
My Adobe PhotoDeLuxe was unfortunately deleted and I had to buy Photoshop, which is far less convenient for my needs. How can I drag and drop, or copy and paste, an image I have modified in Photoshop directly into another programme, in my case usually MS Publisher ?
Is there a way that, when I double click an image in My Pictures, I do not have to watch a long list of the people who designed Photoshop before I can actually use it?
I've been using photoshop cs6 Extended for almost a year now and never have had any problems with it. Recently however, I purchased a desktop with Windows 8, and when I reinstalled Photoshop on that, I have had problems since. When I move to drag something onto photoshop (Whenetheir it's from the internet or a folder on my Computer), A black Stop icon that represents my mouse refuses to let me. I can still open files normally with the "Open" tab in Photoshop I've already tried the following:
Running as both adminstrator and non-adminstartor Made sure "Clip thumbnails to document bounds" is checked" Resetting Photoshop Preferences Made sure none of files I wanted to drap and drop were "Read only" In addition, When I'm moving files, the background for some reasons flickers My OS is Windows 8 and my Version of photoshop is cs6 extended.
