Photoshop :: Figuring Out Accrual DPI Of Images In Pathfinder For Mac Vs CS6
Jan 5, 2013
I was looking at some images in both pathfinder for mac & Photoshop CS6, when I looked at an image I scanned with my HP photosmart, in the get info button in pathfinder, it would list horizontal & vertical resolution as 600 DPI, when I opened this same image in Photoshop, & clicked on file info there was very little about it under camera data, just a resolution of 72 DPI.
In the HP scan settings, I chose 600 DPI, why is Photoshop showing it as only 72 DPI?
what is the actual resolution of this image? which is going to give me an accurate number and the one I should believe? pathfinder? or Photoshop? I thought it was 600 DPI
how can I be sure that I am scanning my images at the resolution I choose?
View 2 Replies
ADVERTISEMENT
Apr 22, 2013
I have created an arc using the Brush tool and now need to clip one end of it. If you refer to the attached image you will see that 1 is the arc created as a brush and 2 is what I wish to achieve by making the right hand end 'horizontal'. If I place a rectangle in front as shown in 3 and try to use a tool such as Pathfinder, I get a strange result as shown in 4. Because it is a brush there are no handles to allow me to reshape the end of the arc. Is there a way to achieve this. I need the final image to remain a vector as it will need to be resized. I am using Illustrator CS6.
View 3 Replies
View Related
Jan 21, 2014
Having problems with the pathfinder tools after updating to the latest verstion of CC? I can't seem to unite, divide, or trim paths with the usually predictable results. s there a way to turn live corners off?
View 2 Replies
View Related
Jul 26, 2012
I am trying to make the olympic rings, but when I try to divide the rings using the pathfinder, nothing happens. It just ignores any klick on the pathfinder tool. Is this a new feature of CS6 or is it just a bug?
View 2 Replies
View Related
Oct 10, 2012
For combining shapes, isn't the Shape Builder tool essentially the same thing as using Unite in the Pathfinder? Is there some other advantage to using it?
View 1 Replies
View Related
Sep 26, 2013
Pathfinder window does not open
View 1 Replies
View Related
Jun 10, 2013
I am a newbie in illustrator. I want to use pathfinder to unite two paths. One path has the effect of bulge. When I unite these, both of the paths get the effect bulge. Why is this happening and how can i avoid this?
View 3 Replies
View Related
Dec 29, 2013
I drew a line using the line tool and then used the smooth zig zag to create a wave.The wave starts with the "low wave" and I want it to start with the "high Wave" so I tried the mirror option but that does not seem to make any difference.
I then made my "wave" longer and treid to use the pathfinder tool to "cut" the part of the wave I wanted but that did not work either.Is the line tool and zig zag the wrong tool to use?
View 4 Replies
View Related
Aug 15, 2013
I outlined a bit of text, and then applied Effect > Warp > Arch. What I'd like to do is cut apart parts of the now outlined letters. I tried to use the pathfinder palette, but it applies the pathfinder to old, non-arched shape.
View 2 Replies
View Related
Jun 16, 2011
Using GPS Pathfinder to export to shapefile to load into AutoCAD. I've done it before, but I messed up the Pathfinder software this time. Using Pathfinder version 4.20
Opened Pathfinder, went Utilities (top tool bar)...Export and the Export popup came up. Then accidently deleted "Sample ESRI shapefile" from the "Choose an Export Setup" drop down list. Clicked the New button at the bottom. Selected a new ESRI shapefile set up, clicked ok.
What do I enter in the Export Setup Properties tabs? (tabs are Position Filter, Coord. System, ESRI Shapefile, Data, Output, Attributes, Units) What were the values in the original "Sample ESRI shapefile?". I tried not entering anything...the points can be exported to a shapefile, the shapefile can be loaded into AutoCAD map but there is no coordinate system (even if coordinate systems is edited in AutoCAD) so the points are always shown at (0,0).
Also tried uninstalling Pathfinder on my computer and then using the original CD to reinstall. Still not showing Sample ESRI Shapefile after reinstalling. How does the CD not reinstall clean? Have turned the computer off and on between deleting and reinstalling.
View 3 Replies
View Related
Mar 13, 2013
I have been using Illustrator for a couple of years now and from time to time I encounter very strange behavior when manipulating a vector shape.I have a current example here where I simply want to create a combined shape using the pathfinder tool:
As you can see, the generated shape (red) does not cover the original shape (green).When I use the path selection tool, I am able to reposition the first anchor but when I do the same for the lower anchor as well the entire shape is replaces a few pixel to the left. Even using the "align" tool afterwards is not useful. It seems impossible to make the red shape cover the green one.
View 2 Replies
View Related
Jul 9, 2012
I'm running illustrator CS5.5 on Windows 7.
I'm making variations of a logo and one of them is a single color reverse. The logo is basically the letters 'MCS' written on a block of color. When I try to use the Pathfinder's subtract feature to knock out the letters from the block I get some slight distortion on the letters.
I was running CS2 before and I did this many times but I never had any distortion.
Is there a setting I can change?
View 5 Replies
View Related
Feb 27, 2014
So I keep seeing this method of design on sites like dribbble or behance but I don't know how to do it!
Here's an example: Basically a bunch of circles are used to create this awesome shape and design. I have a general idea on how to use the pathfinder tool and I have used it a lot in the past, but how do you snap circles together with smart guides? It seems that the smart guides only snap based on 90 or 45 angles and don't snap edges of objects together unless there are two anchors.
Here's an example: I want to use the curves from 2 circle shapes to make a complex path. But I can't get the two paths to snap together
Ultimately to create something like the raindrop image above. I want to use the perfect curves on circles to create more complex shapes but since the paths do not snap together, I'm just eyeballing it to be close enough to do something with the pathfinder tool.
View 13 Replies
View Related
Sep 30, 2013
So occasionally, when working on customers files, outlined text becomes warped when resizing or using Pathfinder. For instance, I have "III" written and outlined, but for some reason if I resize this, the middle line become thicker than the other lines. Other text changes as well making it very hard to make the necessary changes to my artwork without ruining the text.
View 1 Replies
View Related
May 21, 2013
I made a shape, then put a shape behind it then used intersect pathfinder, but I often get these lines?
cant post images it seems on this forum? clicking the insert image just gives a blank box
View 4 Replies
View Related
Aug 5, 2013
I made a design that consists of multiple shapes; the entire thing has been expanded and grouped. I image traced and expanded a grunge texture that I would like to "cut out" of my design. I placed the texture over the design, selected both Groups (texture and design), and tried Minus Front and Minus Back (among a few others just to test) and the two both leave nothing but a couple speckles from the texture.
View 10 Replies
View Related
Jan 29, 2014
In illustrator, I have placed an image that I created in photoshop. Once I trace and expand it, with the option to ignore white selected, there are still transparent shapes that I have to manually delete. For what I am doing now, it is way too tedious to have to do that. Why, if I'm 'ignoring white' so that I simply get a black/transparent vector image, are these transparent shapes showing up?
View 4 Replies
View Related
Jan 9, 2014
Win7 Enterprise 64 bit
Illustrator CC 17.0.1 64 bit
After placing an image into a new document within Illustrator. I trace the image and expand it. from there I attempt to Alt-click on the unite shape mode to create a compound shape.
No results...the compound shape is not created.
View 9 Replies
View Related
Jun 17, 2013
I'm currently having troubles from having too many anchor points after "image trace" or "offset path tool".
1. I would like to know if there's a way of deleting useless points AT ONCE. (ex. multiple anchor points on a stait line, or duplicated points at one anchor point)
- I've tried "Simplify" but it changed the picture too much.
- I've tried "Remove redundant points" when using "image trace" but it came out as below:
2. Sometimes pathfinder seems to make duplicated paths. Is there any way of knowing that there are duplicated paths OR eraseing duplicated paths at ONCE?
View 8 Replies
View Related
Sep 29, 2005
where I can find script/plugin/software for making images composed of images. I'm desperately needing this for an non-profit assigment. Any help would be very much appreciated!
I'm looking for a script, software or photoshop plugin or anything that could help me with this.
What I want to do is this: Out of ~ 1000 pictures I want the software to arrange them into visualizing an image which I have choosen.
View 3 Replies
View Related
Jan 4, 2004
I am in the process of completing my Photographic website and need to make thumbnail and larger sizes for the the site. The site will have approximately 100 images on it. Clicking the thumbnails will connect to the larger images. How do I make both sizes in PS CS? Perhaps their is a generator that you would recommend for Mac 10.2?
View 3 Replies
View Related
Oct 31, 2013
I am attempting to combine several images into a collage of reduced-sized images that can be expanded when clicked on
View 1 Replies
View Related
Apr 1, 2013
A long time ago, when I was using Photoshop Elelments I found a plug-in that made it possible to work with stacks as a unit.
If I labeled the top image in the stack that lable was applied to all the images in the stack; then I could sort the the image on top and all the images in the stack would stay together, or if I deleted an image in the stack all the images in the stack were deleted. Without it I have open each stack I lable and apply the lable, so when I sort the stacked images they stay together.
View 7 Replies
View Related
Feb 20, 2012
I need to convert color images of vehicles to monotone images. When done correctly they will look like the car has been primed in preparation for painting.
Conversion to gray scale does not do the trick.
View 1 Replies
View Related
Jul 13, 2013
I'm making a collage containing 4 images with different resolution. I want each image to have faded edges (to white) and I'm using gradient tool to accomplish this. The problem is that since the images have different resolution the gradient tool gives different result on each image even though I make the same "swipe". Is there another way of accomplishing these faded edges, equally looking and of the same size? The faded edges (to white) will, as you might have understood already, constitute the limit between the four pictures, that is, a white cross.
View 1 Replies
View Related
Nov 9, 2005
Hi, I am starting a new business making art prints for artists. I have purchased this huge printer ... just got it. I've been studying photoshop for months using "classroom in a book" and am finding out that I've probably studied the wrong thing.
I have three questions and thanks in advance for any of your expertise.
1. I successfully printed out a two foot by two foot photo I took of my husband with my 8.2 megapixel camera. Then, tried to print out another photo.... used the same photoshop settings, but the print was 6 inches by 6 inches...... I did notice that the second print was only 16. %... I wondered if that caused the difference in size? How do I set that to 100 % if that is what is needed?
2. I want to print out multiple small prints using this big paper and printer... I want to tile these various prints (all different) along the top making rows... I want them to be all different. I called Epson support and they said I could do that in photoshop. Do I use the browser?
3. I have a wide format scanner. It does up to 11 x 17 inches. If I have something larger to scan, let's say, I scan the bottom of the image and then scan the top of the image, how do I put them together?
View 6 Replies
View Related
Mar 3, 2013
Just installed Lightroom 4, more than 60000 images were imported. Many of them were duplicates, triplets and so on. I want to have a clean, unincombured library. Should I delete the 60000 images and reinstall the images from my photo digital cards or use the slow process of "X" out the unwanted images? I would like to start improving my images vs removing the unwanted images.
View 2 Replies
View Related
Dec 3, 2012
I've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies
View Related
Mar 27, 2011
But I wouldn't be able to upload a hundred tiny, plain images. I made this to add onto the background removal FAQ. I hope it's accepted.
[URL].......
(Image is clickable.)
View 10 Replies
View Related
Mar 25, 2011
Lightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.
View 3 Replies
View Related
Jul 18, 2012
In Lightroom 4.1 when rating (flags, stars or colors) a selected group of images all images selected will have the same flag applied. For instance if I select 10 images to view in the survey mode to compare and select 1 to be flagged as rejected all 10 will be flagged rejected, not just the one. Is there a way to turn this off to select a group of images and flag each differently?
View 2 Replies
View Related
