I am trying to make the olympic rings, but when I try to divide the rings using the pathfinder, nothing happens. It just ignores any klick on the pathfinder tool. Is this a new feature of CS6 or is it just a bug?
I have created an arc using the Brush tool and now need to clip one end of it. If you refer to the attached image you will see that 1 is the arc created as a brush and 2 is what I wish to achieve by making the right hand end 'horizontal'. If I place a rectangle in front as shown in 3 and try to use a tool such as Pathfinder, I get a strange result as shown in 4. Because it is a brush there are no handles to allow me to reshape the end of the arc. Is there a way to achieve this. I need the final image to remain a vector as it will need to be resized. I am using Illustrator CS6.
Having problems with the pathfinder tools after updating to the latest verstion of CC? I can't seem to unite, divide, or trim paths with the usually predictable results. s there a way to turn live corners off?
For combining shapes, isn't the Shape Builder tool essentially the same thing as using Unite in the Pathfinder? Is there some other advantage to using it?
I am a newbie in illustrator. I want to use pathfinder to unite two paths. One path has the effect of bulge. When I unite these, both of the paths get the effect bulge. Why is this happening and how can i avoid this?
I drew a line using the line tool and then used the smooth zig zag to create a wave.The wave starts with the "low wave" and I want it to start with the "high Wave" so I tried the mirror option but that does not seem to make any difference.
I then made my "wave" longer and treid to use the pathfinder tool to "cut" the part of the wave I wanted but that did not work either.Is the line tool and zig zag the wrong tool to use?
I outlined a bit of text, and then applied Effect > Warp > Arch. What I'd like to do is cut apart parts of the now outlined letters. I tried to use the pathfinder palette, but it applies the pathfinder to old, non-arched shape.
I have been using Illustrator for a couple of years now and from time to time I encounter very strange behavior when manipulating a vector shape.I have a current example here where I simply want to create a combined shape using the pathfinder tool:
As you can see, the generated shape (red) does not cover the original shape (green).When I use the path selection tool, I am able to reposition the first anchor but when I do the same for the lower anchor as well the entire shape is replaces a few pixel to the left. Even using the "align" tool afterwards is not useful. It seems impossible to make the red shape cover the green one.
I'm making variations of a logo and one of them is a single color reverse. The logo is basically the letters 'MCS' written on a block of color. When I try to use the Pathfinder's subtract feature to knock out the letters from the block I get some slight distortion on the letters.
I was running CS2 before and I did this many times but I never had any distortion.
So I keep seeing this method of design on sites like dribbble or behance but I don't know how to do it!
Here's an example: Basically a bunch of circles are used to create this awesome shape and design. I have a general idea on how to use the pathfinder tool and I have used it a lot in the past, but how do you snap circles together with smart guides? It seems that the smart guides only snap based on 90 or 45 angles and don't snap edges of objects together unless there are two anchors.
Here's an example: I want to use the curves from 2 circle shapes to make a complex path. But I can't get the two paths to snap together
Ultimately to create something like the raindrop image above. I want to use the perfect curves on circles to create more complex shapes but since the paths do not snap together, I'm just eyeballing it to be close enough to do something with the pathfinder tool.
So occasionally, when working on customers files, outlined text becomes warped when resizing or using Pathfinder. For instance, I have "III" written and outlined, but for some reason if I resize this, the middle line become thicker than the other lines. Other text changes as well making it very hard to make the necessary changes to my artwork without ruining the text.
I made a design that consists of multiple shapes; the entire thing has been expanded and grouped. I image traced and expanded a grunge texture that I would like to "cut out" of my design. I placed the texture over the design, selected both Groups (texture and design), and tried Minus Front and Minus Back (among a few others just to test) and the two both leave nothing but a couple speckles from the texture.
In illustrator, I have placed an image that I created in photoshop. Once I trace and expand it, with the option to ignore white selected, there are still transparent shapes that I have to manually delete. For what I am doing now, it is way too tedious to have to do that. Why, if I'm 'ignoring white' so that I simply get a black/transparent vector image, are these transparent shapes showing up?
Win7 Enterprise 64 bit Illustrator CC 17.0.1 64 bit
After placing an image into a new document within Illustrator. I trace the image and expand it. from there I attempt to Alt-click on the unite shape mode to create a compound shape.
I'm currently having troubles from having too many anchor points after "image trace" or "offset path tool".
1. I would like to know if there's a way of deleting useless points AT ONCE. (ex. multiple anchor points on a stait line, or duplicated points at one anchor point) - I've tried "Simplify" but it changed the picture too much. - I've tried "Remove redundant points" when using "image trace" but it came out as below:
2. Sometimes pathfinder seems to make duplicated paths. Is there any way of knowing that there are duplicated paths OR eraseing duplicated paths at ONCE?
In CS5, I created a very handy action that allowed me to, with two paths selected, Divide, Ungroup, and Deselect, resulting in the divided paths without having to do each step manually.
In CS6, for some reason this is no longer possible-- if I try to record the same action, after the divide, everything is automatically deselected and I get a "The object "Ungroup" is not currently available" error. Very frustrating that the new version is more troublesome to use!!
I KNOW that it's possible to do this because I was somehow able to fudge it at one point and get this action to work. But I'm not sure what happened-- maybe a step was deleted in my action or something-- but one day it just stopped working. This action is basically THE function I use most in Illustrator given the way I work, and while it's not a huge step, having to manually reclick, ungroup, and deselect is a huge inconvenience.
I have no problem dividing objects using the "divide" tool in the Pathfinder palette, but I was wondering if there was a way to divide brush strokes?
For example, let's say you wanted to paint three brush strokes right next to each other, but not overlapping. Is there a way to select all three strokes and then divide them so no one stroke resides over another, they would be completely separate of each other.
How can I divide a line into equal segments in Illustrator? This is computer software, right? Shouldn't a computer be able to figure how to segment an arbitrary line? I tried turning the line into a sliced object and dividing that, but it didn't seem to work. Pathfinder only works on two or more objects.
I'm sending this message regarding this link : URL....Just need a favor with all my respect to you and i think you will not let me down asking u for 2 script to divide characters in the textbox like the following:
1st : (TEXT FRAME) : Each letter alone and delete the space character .. with out moving any character from it's position 2nd : (TEXT FRAME) : Each word alone and keep the space character
I want to divide object into multiple object equally distribued. But my object is a "S", this is not a basic rectangle. And i want to apply this technique to other objects. I don't know if it's possible to do that with illustrator because it seems a little bit complicated.
I was looking at some images in both pathfinder for mac & Photoshop CS6, when I looked at an image I scanned with my HP photosmart, in the get info button in pathfinder, it would list horizontal & vertical resolution as 600 DPI, when I opened this same image in Photoshop, & clicked on file info there was very little about it under camera data, just a resolution of 72 DPI.
In the HP scan settings, I chose 600 DPI, why is Photoshop showing it as only 72 DPI?
what is the actual resolution of this image? which is going to give me an accurate number and the one I should believe? pathfinder? or Photoshop? I thought it was 600 DPI
how can I be sure that I am scanning my images at the resolution I choose?
Using GPS Pathfinder to export to shapefile to load into AutoCAD. I've done it before, but I messed up the Pathfinder software this time. Using Pathfinder version 4.20
Opened Pathfinder, went Utilities (top tool bar)...Export and the Export popup came up. Then accidently deleted "Sample ESRI shapefile" from the "Choose an Export Setup" drop down list. Clicked the New button at the bottom. Selected a new ESRI shapefile set up, clicked ok.
What do I enter in the Export Setup Properties tabs? (tabs are Position Filter, Coord. System, ESRI Shapefile, Data, Output, Attributes, Units) What were the values in the original "Sample ESRI shapefile?". I tried not entering anything...the points can be exported to a shapefile, the shapefile can be loaded into AutoCAD map but there is no coordinate system (even if coordinate systems is edited in AutoCAD) so the points are always shown at (0,0).
Also tried uninstalling Pathfinder on my computer and then using the original CD to reinstall. Still not showing Sample ESRI Shapefile after reinstalling. How does the CD not reinstall clean? Have turned the computer off and on between deleting and reinstalling.