I'm working on making some animations, I know how the extraction tool works, but it's taking a long time to extract every frame. As each frame has the same outline, is it possible to save the extraction outline and export it to the next frame so I don't have to keep on extracting the same outline over and over?
View 1 RepliesI applied a painted texture to my character and now he has a blue mesh frame. How can I remove this frame?
View 4 Replies View RelatedI just started using the new Indesign CC and one of the features that I miss is the blue outline that would appear around textboxes. It would allow me see where my text was and move it around. The new Indesign CC displays text, but with no outline around the text, which makes it difficult to re-adjust the box size and move around my text.
Is there a way to enable the text box outline to show when designing (not when printing) as the previous verisons of InDesign did?
IN crop tool, I know you can save a setting like 5x7, 8x10 etc, but is there a way to save the actual outline, so you don't have to drag out the rectangle image after image?
View 4 Replies View RelatedI dont have any problems converting this:
[URL]....
to this:
[URL]....
but i am not sure how i go about saving it so it is just the blak and white file??
I have a problem with CorelDraw X4, some tools like save, save as, copy, cut, export doesn't work.
View 10 Replies View RelatedI'm trying to export an animated gif with 52 frames - I'm using the timeline in CS6, it's exported correctly in the past but when I try and save for web only a seemingly arbitrary number of rames appear in the animation. With no clear route to rectify this, I've tried to affect the outcome by simply moving things around on the timeline.
I've had a variety of frame ranges (and frames) numbering between 2 and 6 frames, far off my 52 target. It's a simple image and equally simple transition to keep filesize down
While "Draw" of Coreldraw X5 is working well, Corel Photopaint X5 does not "Save", "Save as..." or "Export" files. It just does nothing, when I choose to save a file under "something.cpt". It works, as long as it is a JPG, but not as a CPT. I am working on a Win7, with CorelX5 in german. Support told me to reinstall.
View 15 Replies View RelatedIf I choose at AI, the export, to jpg option, and tick the use artboards option, the exported jpg will get a rather thick white frame.
The document has no stroke, if i export without the use artboard option there is no problem..
In Corel Video Studio Pro x3 - Is there anyway to save a single chosen frame as a .jpg file or some other editable picture format?
View 4 Replies View RelatedI recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons. If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)Photoshop.exe
Faulting module path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.
I would like to know if there is a way to export a photo with a black frame where on the bottom line some additional information is given (like aperture, shutter speed, ISO, ...)?
View 2 Replies View RelatedI only recently upgraded to 2.8 from 2.6 and was wondering if I am the onlyone missing the option to edit the file extension in the SAVE formwhich basically allowed you to Save, Save Copy, Save As or Export to anyformat from the same form?
I also found it strange that if I now open a JPG file (or drag into GIMP),I can't save changes (to the JPG) directly (it wants to save to native Gimpformat), so I again first have to go to Export instead!
I am wondering why this was incorporated, and if it's going to stay, is there a setting I can set to work like I am used to (and find much fasterand more flexible)?
How to reset Auto Export frame count back to - example still123.tif to still001.tif or change the count to commence at a number you want like still200.tif
View 1 Replies View RelatedExporting 25fps QTs using H264 1080i (10mbit) settings produces quick times that jump at the start and have strange frame rates (20.7 and 25.17).
View 5 Replies View RelatedI cannot Export QuickTime any Codec ( h264 / 444 / 442 / mp4 / PNG / Jpeg )in Smoke for Mac 2012 SAP1 - Export Media.
I can export it before but not today.I get "Error Get Frame 0" - What Does is mean ? and What is the cause ?
I try to reinstall backburner(2012.1) and mio (2012.1) not work.So i can export in sequence format like DPX / Jpeg that useless.
Just Download Utility with same version of your Smoke and Reinstall : Wiretap Gateway/Wiretap Central/MIO and BackBurner.
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
I have been given a circa 2006 Photo frame that works very well except the system on it is set for DOS 16 bit and my more modern photos refuse to work.
I can save the photos but is errors on them. How do I save the photos in a form that this device can use?
I have image.psd file with base1, base2, base3, base4, base5 layers and
variation1, variation2,, variation80 layers.
I need to export images and save them as
imagebase1variation1.jpg, , imagebase1variation80.jpg
and the same for each base layer + each variation layer. What is the most efficient way to do that in Photoshop CS5? (And I need to repeat this task for the rest of my 200 .psd images!)
Currently self teaching myself using 3D on a current project I'm working on. A cable stayed bridge having a span of 30 metres supported primarily by a single diagonal parabolic arch. The arch is square in section but rotated so it looks like a diamond along the arch length. To draw the arch I have drawn the arch sections at intervals along the centreline where it changes size in section 1.4, 1.2, 1.1 and 1.0m. I have then used the loft command to draw the arch using the drawn sections as the objects to loft through.
For the GA drawing I have a plan view and elevation. When printing the generated/ lofted lines are are pixelated and not very crisp or clear (not a solid line).
I have tried adjusting the visual style and shade plot, for each of the options and none of them are giving me a solid crisp outline for the generated arch. I have also had a little play using the visual styles manager but nothing seems to work and also tried maximum quality in the print options.
What do I need to do to print a solid crisp outline for the outline of the arch please, are you able to select the edges of the square and convert them to solid 2d/ 3d lines.
Arch Plots.pdf
I am taking an online coreldraw class involving the rendering of a baseball with two opposing three-point curves.
Where can I find the button for the tab labelled " Outline width" or "outline pen window".
when I use the shape tool and text tool I'm getting a red dotted outline instead of the usual black outline. If I draw a rectangle it's empty, instead of shaded in? How do I put things back to normal?
View 3 Replies View RelatedI have a black-and-white outline drawing that I want to color in using the "Bucket Fill" tool. There are two things I'd like to do to make it easier:
1. Is there a way to prevent Bucket Fill from leaking through small gaps in the drawing? Usually what happens is, I fill in one region, and then suddenly a much larger region gets filled in. I then have to examine the borders of the region for a small opening, close the gap with black, and then try again. Is there a feature that lets me say e.g. "Don't fill through gaps less than 4 pixels wide"?
2. Once I'm done coloring, I want to remove the black outline to make a more realistic, less cartoony image. However, it's tedious to go and paint over every segment of the outline with the color of its adjoining regions. What I want to do is essentially: Replace every black pixel in the image with the color of the closest non-black pixel. Is there a feature that does this?
Also, if there are third-party plugins that do these things, that would work just as well.
When I export a photo from lightroom to photoshop, work on it and click control/s it saves the file back into lightroom, but then I have to save it again to close photoshop or I get a dialog. Why am I having to save twice in a row when nothing has changed the document? Windows 7 photoshop cc lightroom 5.2.2
View 7 Replies View RelatedI have a design that is A3 size (i.e. 297 × 420mm) and 300dpi. I'd like to save out various versions of the image: one at full size, one at 150 dpi, one at A4 (i.e. 210 × 297mm) 150 dpi, and one at A4 72dpi. At the moment I'm doing this by saving different versions of the Photoshop PSD file and then doing a 'Save As' jpg from each of those.
What's the best way to save multiple sized versions of a design?
If I resize an image in Photoshop to be smaller and/or fewer DPI is that destructive or can I go back without loss of clarity? (I'm guessing not as the PSD file sizes are so different.)
How can I save my raw histogram data in order to export it to something like excel?
View 1 Replies View RelatedI create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
I am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture.
View 2 Replies View RelatedHow do I creat a frame inside a frame? Elements 4.0
View 2 Replies View Relatedsince a month, when i try to save a job in adobe illustrator cs 5, it appears "unknowned error" (italian version) and i can't save my job! i tried to save as pdf, as ai, to export as a jpg, nothing is possible!
i uninstalled all the software and i instaleld again: sometime it goes well, but evryday i have this problem
I would consider myself intermediate photoshop, but to the photoshop community most likely a nub. anyways, I have been trying with different ways to extract this breaker from an image, with all attempts looking edgy and not professional.
View 4 Replies View Related