Photoshop :: Emboss Image
Apr 7, 2004I need to add an 'embossed' effect to a small rectangular JPEG image but so far haven't been able to achieve this.
View 2 RepliesI need to add an 'embossed' effect to a small rectangular JPEG image but so far haven't been able to achieve this.
View 2 RepliesI'm trying to create some icons using layer style/blending options.
I do emboss and apply gradient and add glow and so on.
Looks all really nice. But then, when I save for web and devices as a .gif file, there is some ugly "blur" around my created shape. As if .gif. interpreted the embossing thing in a wrong way,giving it some color instead of transparency ...
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
----------- END -------------------
I created a file in .psd, with several text layers to which I applied effects (fx) such as stroke, bevel & emboss, outer glow. When I flatten the image, the outer glow and stroke remain, but the bevel & emboss effect is gone. Type is a single color without the 3 dimensional effect.
I am also not able to preserve the bevel & emboss look when saving as a jpeg or a flattened .tif or .pdf. A saved .tif or .pdf with layers shows the effect just fine, but if the pdf is opened with Acrobat instead of Photoshop, the effect is not visible.
This must be a new problem, because I found a file that I created several years ago that is a flattened .tif with the bevel & emboss effect preserved.
I tried rasterizing the layer, and the type. Tried converting to 16 bit changing mode to CMYK, and multi-channel. Everything that involved merging layers lost the bevel & emboss effect.
I want to take a simple black and white image (not even grayscale) and use it as a stamp to deform a wood grain image. Basically a footprint in the sand type of thing.
View 3 Replies View RelatedI'm trying to make some book covers and get a decent emboss effect. I'm only using Photoshop Elements 7 but it does have an Emboss facility in the Stylise part of the Filters menu.
The problem is that whatever I do the embossing always comes out in white/silver when I'm trying to get black. Why the hell is that and why can't it be changed? Does anyone know how?
Is there any plug-in that has more control over bevel/emboss than the basic PS 7 effects. Or has CS 2 improved on the PS 7? Mainly for use with Text.
View 4 Replies View Relatedi was wondering if it is possible to increase the 'height' value higher than the current maximum of 100 pixels [in the Filter>Stylize>Emboss... filter]. This is on Photoshop CS2. I using this multiple times so I wondered if it is possible automatically and not manually.
View 1 Replies View RelatedIn photoshop7 I make a coloured vector shape.
Then I apply a bevel with an obvious highlight and shadow.
Heres the question:
Is there anyway to then hide the shape so that I just have the bevel and shadow, so that I can overlay this elsewhere
Obviously hiding the shape hides the effect aswell....
I am trying to create a logo similar to the picture I have attached. It isn't exactly embossed, rather imprinted. I am trying to use the digit 6 in avant garde/ century gothic font 62pts, same colors. Somehow, I can't seem to get the desired effect using the embed/bevel layer setting.
View 9 Replies View RelatedI have never tried this before even tho I am an old hand at general photoshop use, ever since Version 3. Looking for an effect something like Google has. Not all the colors, just the neat pillowed emboss effect.
View 2 Replies View RelatedFor example if I wanted Drop Shadow to appear on top of Bevel / Emboss? tried draging them in the dialogue box but no joy.
View 2 Replies View RelatedI keep having this problem where my bevel and emboss effects and other effects disappear when i merge layers or save as a jpeg. Why would that be and how can i prevent it?
View 2 Replies View Relatedi am using photoshop 7 + cannot figure out how to do something. i have a scan of a line drawing in black ink on white paper. first thing i want to figure out is how to make the white disappear so that i can select the drawing itself without the white box around it.
second thing: how do make the line drawing change color? i would like to make it white so that i can place it on a colored background + have it appear to be in relief?
It would be cool if Adobe would have provided a Reverse checkbox for Bevel & Emboss effects, like they did for the Gradients. Is there a quick way to reverse a bevel and emboss effect or do I have to adjust each setting manually?
View 3 Replies View RelatedSomething strange here, just working on an image idea, thought to try 'Distorts / Emboss' only to find that the function is greyed out. Haven't a clue what to do about it.
I have re-installed gimp and done a reboot with no change so I am stuck.
Specs - OS Ubuntu, Gimp 2.8 single window mode with ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu precise
I have 2 separate sketches which will be used to EMBOSS on the curved surface.I can get them to work except i want 1 sketch to be Green when Embossed on the surface in color and the other sketch to be red in color when Embossed with the back ground Black.I can only get it to work as 1 color.I tried with Split command but still no luck.After both sketches EMBOSSED to the surface i can only get 1 color for both EMBOSS
View 1 Replies View RelatedIs there a way I can use the emboss feature in an assembly? We typically laser mark during final assembly and would like to show that as a step in the assembly instructions.
I typically create a sketch with the text and extrude(cut) in the assembly. It works fine for flat surfaces, but cannot do it for other surfaces.
The one way I can think of doing it would be creating ipart with text and using it in the assembly. I would rather not do it this way. Is there any other way to accomplish this with out altering the components (.ipt)?
Is there any plugins that have Bevel and Emboss?
View 13 Replies View RelatedPossible to achieve emboss effect like this as vector?
View 4 Replies View RelatedIn a part, I create a sketch, add annotation Type in the file name. Then create an Emboss feature using this sketch.
How can I add the file name property to the text. I want the the emboss to update to new file name if I rename the file.
I have a vehicle that is made up of about 15 materials (glass, paint1, paint2, chrome, plastic, rubber, etc.). Many of those separate materials are Multi/Sub-object materials.
The client wants a paragraph of fat text embossed into and wrapped around the vehicle. The text will cross over many different materials. Adding a "bump map" to just one material looks great on "that one" material and is all I need but how can I just add a "bump map" to the entire vehicle model at one time? I've tried adding the bump map to several materials but nothing lines up and it is a nightmare. I just need to wrap a bump map around the entire vehicle and have it "bump" whatever material it is over.
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard,
Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram,
Quadro 4000 Display Adapter
How to add an emboss effect to some text!?! I want to key this on top of a bg in batch.
View 1 Replies View RelatedHow to emboss scale on the cylinder? Please see the file attached. The arrow is the portion I want to created in my part file.
View 9 Replies View RelatedI edited a sketch for an emboss to move the number over. But the resulting emboss still acts like I din not make the edit.
Inventor Suite 2013 Ultimate
The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
Try and use the emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
Please edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
I have embossed text onto a part face with an assigned colour of white (main part colour is black). That is all fine in the part model, and indeed when I use that part in a sub-assembly. But, when I use that sub-assembly in a larger top-level assembly the text is black (which doesn't show up too well on a black background ). I must be missing something in a setting but I can't find it. As a test I brought another white-on-black embossed part into the same top-level assembly and that is absolutely fine.
View 2 Replies View RelatedIs there a way to give Bevel & Emboss effect to text in Illustrator, the same way like in Photoshop?
View 10 Replies View RelatedI'm trying to emboss a sketch to a lofted body. The same sketch is embossed perfectly on a flat/round/extruded/chambered body, but on this particular lofted body I get an error ("Thicken operation would result in a large topology change. Try with a smaller thickness"). I already tried with 0.01mm thickness and still not work. What could be the cause. (I'm using IV 2013)
View 4 Replies View RelatedI need to wrap some curve on a cylinder, after which i need to emboss the feature onto the cylinder.
I had sketches the curve and wrap it but was unable to emboss it to the cylinder.
Edited: I tried the boundary patch command. I was only managed to thicken/offset and then substract one patch with another one failed.
The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
How to use emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
save it and send it back or explain why it keeps failing.
edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.