I am using Primo PDF virtual printer to convert Excel document into PDF format. However, every time I attempt to do this, PS Elements 10 opens and imports the document. How can I turn this off?
View 1 RepliesI am not a user of AutoCAD and i am only using it to try and convert the drawings that i have into an excel or csv format.....
I am running AutoCAD 2009 and the drawings are "tables" per say.....with a generic block template from an engineering company, along with text and the company logo.
Is there a way to bring this into excel for easy formatting as i am not an experienced or trained AutoCAD person.....
I am trying to convert my Sheet List Table into an editable Excel or Word document.
View 1 Replies View RelatedMacosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again. Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11. Start it up again. Guess what first print is a mess again. all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11. Same thing.. first print a mess all others ok.
no problems with PSE10 or PSE9.
Recently, I have needed to convert my CR2 or DNG files to CMYK profile for a printer. It is my understanding that PS Elements (any version) does not support CMYK profiles. I am an avid amateur I think I need to change from Photoshop Elements to CC or PSCS. What would be the most cost effective way to accomplish this goal?
View 2 Replies View RelatedWondering how to best format prints for printer to avoid visible edge loss in printing. I have color borders on the photos, H & V.Do I subtract a 1/4th inch from each side while formatting? Order with "border" and cut the border?
Prints will be mounted on standzard 16 x20 backboard.
How do I get a mhtml document into photoshop elements?
View 2 Replies View RelatedCan I convert PDF image to TIF format with my Elements 2?
View 2 Replies View RelatedHow do I convert a photo to CMYK format in Photoshop Elements 12? If I cannot, is there another program in adobe that would allow me to convert a photo to CMYK format?
View 1 Replies View RelatedWhen I link in an excel document to my model all parameters in that excel gets the unit (mm).
How can I change this? For instance I want some of the parameters to be an angle.
getting virtual Components to be included in an Excel output of an assy BOM. I have an existing macro (see code below) that exports the StockNumber, partNumber,Description and an occurrence count of each item to an Excel spreadshet. It all works fine except for Virtual Componenst which are not included. It seems that because no file is created that the VC item can't be included in the Excel doc.
Sub Assy2Excel()
Dim oAssDoc As AssemblyDocument
Set oAssDoc = ThisApplication.ActiveDocument
Dim SIPropSet As PropertySet
Set SIPropSet = oAssDoc.PropertySets.Item("Summary Information")
Dim rev As String
rev = SIPropSet.ItemByPropId(kRevisionSummaryInformation).Value
If oAssDoc.DocumentType <> kAssemblyDocumentObject Then
MsgBox "The Active document must be an 'Assembly'.", vbExclamation
Exit Sub
End If
If MsgBox("The generated list is for the use of the Purchasing Department. It counts all of the BOUGHT & MADE parts in the assembly. Some manual editing will be required to 'clean up' the list.
", vbYesNo + vbQuestion) = vbNo Then
Exit Sub
End If
Dim oDocs As DocumentsEnumerator
Set oDocs = oAssDoc.AllReferencedDocuments
[code]....
HP Z420 Workstation, Windows 7 x64, 64 GB Ram
Intel Xeon E5-1620 @ 3.60 GHz, ATI FirePro V7800 2 GB
3*Dell 2007Fp monitors, SpacePilot
Inventor 2013 PDS Premium & Service Pack 2 with Update 3
Vault Workgroup 2013 with Update 2
My company will be getting a new large format printer to replace the current one we have. We don't have room enough to have both running at the same time so I'm imagining one-day down then viola, we have a new printer.
How I can prepare for this as far as creating the necessary Plot Styles, pc3, pmp...files? Because i have many items on my to-do list, this could take a day or two with all the testing and i can't image the uproar from our CADers about going without a plotter for two or three days.
I have to set up my drawing on the model page so that I can save it as a PDF and then transfer it into adobe illustrator. My scale is 1:1, and when I put it on the model page I'm doing a 1/8" : 1' scale. It should fit on the page no problem, its only a 9" model plan on 1/4 scale, so it should be 4.5" on the page. However, it's too big for the page.
View 1 Replies View RelatedHow can you format or resize the photos as wide screen format so they will display in wide screen mode on Sony photo frame players?
View 1 Replies View RelatedI inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View RelatedRecurring problem i'm having with bitmaps im trying to export to our large format printer. Some bitmaps are coming up with a grey type filter or lens that corel is automatically putting over my photo.
When i export this' filter' remains on the picture.
If i hit 'edit bitmap' the photo comes up normal with all the colours as it should be. Hit 'save' and it goes straight back to having a grey filter over it? Its only with some photos and the other ones are the same profile on the same page? It seems to be always the physically largest one in size (not dpi) I have tried converting to a cmyk bitmap instead of RGB.
having some nice flyers printed at Office Depot. They do not accept CDR files (practically nobody does),
so which format would be best? they take pdf, illustrator etc. the flyer is text plus high quality pictures of art.
I have used Gimp a bit, and before that PS quite a bit. I have never had to use the size constraints for sizing a file to fit a large format printer. I will be getting one any day so I would like to be prepared as much as possible. When I was at another shop, the owner used one of the cropping functions to set the finish print size and then she could move the box around to locate the best print area and remainder to be cropped. She was using PS. I would assume I could do it also in Gimp, but have not found a way to do it yet. What am I missing. Even if the printer software will do it on the printer, I would like to be able to show my customer on a PC monitor what they might expect.
View 4 Replies View RelatedI am a windows Pc user and I am looking for a virtual keyboard like Axiotronic Quicklinks for mac user [URL]
View 4 Replies View RelatedI get an error code U41M1C212 when trying to upgrade in PS Elements 11.I am running MS Windows 8.This doesn't seem to apply as I do not see any of those MS virtual adapters listed. URL....I also disabled firewalls and got the same error message.
View 5 Replies View RelatedI am trying to add an excel document to a cad drawing using ole. I wish to make it transparent so that only the cells themselves are visible and not the white background and empty cells. (I hope that makes sense).
View 3 Replies View RelatedI have a document that I would like to import an Microsoft Excel spreadsheet into.
Basically, my document is a diploma that can range anywhere from 15-250 different names and corresponding dates with those names. It would save a great deal of time if I didn't have to manually type the names and dates into their respective spots.
I have a Microsoft Excel spreadsheet that if possible, I would like to autofill the information into the Illustrator file.
Between the second & third lines of text is where I would like to enter the first column of text. It would be NAMES that go here.
Then, between the fifth & sixth lines of text is where the second column of text from my spreadsheet would go. This area would be filled with dates.
I accidently used photo shop to opened a .pdf file and now all of my .pdf file have to be imported to photo shop to open and I am not able to get all the pages. How am I able to correct this problem and use Adobe Acrobat to open the .pdf file?
View 1 Replies View RelatedI want iLogic to look up todays date in an excel file and then pull information from that row.
The problem I have is that it doesn't seem to like / or - so I am not sure how to format the date.
How would I format my date in Excel so that it matches the wway Inventor stores it in iproperties>Project>Creation Date?
Inventor 2013
DwgNum = iProperties.Value("Custom", "Dwg Number")Client = iProperties.Value("Project", "Vendor")Description = iProperties.Value("Project", "Description")DrawingType = iProperties.Value("Custom", "Drawing Type")author = iProperties.Value("Summary", "Author")Date2 = iProperties.Value("Project", "Creation Date")i =
[Code] .........
I have an MS Word 2011 document with an Excel pie chart embedded.Double-clicking the pie chart will open it in Excel 2011.Copying/pasting the chart into Illustrator CS6 results in an uneditable bit image.
Previously, with Word 2008 and Illustrator CS2, this worked perfectly. Mind you, I had tons of excess empty paths and such to scrape out, but still, after a couple of minutes' scraping, I had an editable .ai file ready to be cleaned up, captions typeset, and colors edited for export to .eps and placement in InDesign
In fact, right now I've had to jump over to my old iBook G4 to open my old copies of Word 2008 and Illustrator CS2 in order to do this so I can get this job out the door.Is there any way at all that I can get an Excel 2011 pie chart into Illustrator CS6 as a vector image?
I've tried the shift-click on "Copy Picture" method, but the pie chart still appears as a bit image, and the text is turned to gibberish. Saving the chart as a pdf returns the same results.
At this point in the project, asking for the raw data set and regenerating the pies in Illustrator isn't an option -- and besides, I've had to do that before. Oh, the pain.
I'm trying to convert Excel graphs into high resolution tiffs. I am saving the graph as an .eps file and opening it in Photoshop. This worked for a few graphs, then all of a sudden Photoshop started opening the .eps file such that it was shifted and only part of the image was showing up (the rest cannot be seen and is just cut off).
View 3 Replies View RelatedI am converting an Excel spreadsheet to PDF using the PDFMaker macro. How do I set a Print Area and still maintain hyperlinks during the conversion?
You seem to have to choose between defining a Print Area OR maintaining hyperlinks. Is there a way to get both?
If I select a Print Area before invoking the PDFMaker macro, I get this message:
Acrobat PDFMaker cannot create Tags, Bookmarks and Links for Worksheets with Print Area other than 'Entire Sheet'. Clear the 'Print area' field in Page Setup to get these features. Do you want to proceed and creat a PDF file without Tags?
MEP 2013
Can you export an OLE object from a DWG back to an Excel file/document?
I have an excel document with a document header reserving rows 1-12. When i use "extract data" in autocad, i don't want the excel header to disappear. Can i set another cell than A1 to be the starting cell in Excel? Or how do i keep the header in the document?
View 5 Replies View RelatedI need to convert my website to pdf format how can I do it?
View 2 Replies View RelatedI know you can batch rename in CS2 but what if you just want to change from jpg to tif? I tried it on some test images and thank goodness I did a test first at it didn't work and I couldn't get the images back.
View 5 Replies View Related