Photoshop Elements :: Photos Look Like Film Negatives After Color Correcting
Aug 1, 2013
I tried following Scott Kelby's instructions for color correcting digital images in PSE 10. I was entering the values he gave for the R,G and Blue channels. I got off track and probably missed a step. Anyway, now when I try any of the auto correction features, my images look like film negatives and not like a regular digital image. How can I re-enable the auto correction features (levels, color correction, etc.) ?
View 2 Replies
ADVERTISEMENT
Oct 6, 2008
I need to color correct gourmet food photos for large format printing on a company truck.
View 1 Replies
View Related
Oct 28, 2013
I am trying to convert a CMYK logo, which I didn't design, into pantone colors for film output (for negatives to make plates for a printing press), but there are many colors and gradients in the original file. I don't know much about offset printing, as I usually use a digital press, but I need to know how to best preserve the look of the original file. I can break down into 4 colors, but I lose the gradient effect... Is there a way to preserve that effect in a film negative? (I'm working in Illustrator CS6 on Mac OS X 10.6.8)
(The image to the left is the original logo... To the right, is the 2 color (Pantone) separation image, which will work for film output, but looks significantly different than the original. I don't know much about the offset press on which these logos will be printed, but I've been told it's a maximum of 4 colors per printed image. I know the press operator can mix any pantone color, but I think the film can only be separated into a maximum of 4 different colors....
View 2 Replies
View Related
Nov 3, 2013
Using an old enlarger I managed to take pictures of old 6x6 cm black and white film negatives. And promised someone to do so with a lot of them (her father's heritage).
I have come up with the following temporary starting points:
View 18 Replies
View Related
Feb 21, 2013
how to fix the color on this photo. I have several more like it. They are scanned from photos that were developed from damaged film. On the photos where the entire image is yellowed I have no problem correcting the color, but I'm not quite sure how to make a selection on photos like these and then match the color to the other half..I am using cs5.
View 9 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Oct 29, 2002
In Photoshop 6, I knew how to correct red eyes pretty well. I just use the Circle Marquee tool to select the eyes and I just simply went to the Channels palette, select the Blue channel, CTRL - C to copy it, then went to the Red channel, then pasted it. And my red eyes were removed when I returned to the layers palette after clicking on the RGB channel.
I tried the same method in PS 7 and it doesn't seem to work that way anymore. Can anyone tell me a way to remove red eyes in photos with PS 7?
View 6 Replies
View Related
Jan 20, 2006
when I have a picture that just isn't right but I'm not sure exactly what it is I'll run it thru "Variations"...It gives me a quick color tint variation..
making it a little more obvouis which way to go in color correcting it.
Rarely use it for the final color correction but I do use it to see where I should go..
View 3 Replies
View Related
Jan 2, 2003
creating a useable photo from a color negative? The Film is Kodak 200. I've downloaded a few different curves for inverting the film.
View 4 Replies
View Related
Sep 26, 2007
How can color correction be applied to a GROUP of layers?
View 3 Replies
View Related
May 12, 2009
What's the best way to get its photos into my computer for PS editing?
View 6 Replies
View Related
Aug 31, 2012
I'm using Elements 10, I can't get Photoshop to scan in my B&W negatives. The just won't open in Elements10 at all. Why?
View 21 Replies
View Related
Dec 9, 2013
My first project will be to attempt to make digital positives from old color negatives.Is GIMP the way to go?
View 2 Replies
View Related
Jan 18, 2006
I'm working on a website with an image and film archive. I wanted to have a couple images for the entry pages that give the site a sort of archive-y, slightly cluttered and haphazard feel. I recently got Photoshop CS2 and have some experience using it and previous versions, though I'm not an expert designer by any means. The two things I'd like to do are:
1. Find a plugin/filter/process to make jpg photo images appear to be old photos sitting on the background. I.e. make them a little warped, give a sense of depth & slight shadow, maybe even a slightly tattered edge. Basically to give the viewer an impression of several photographs scattered on top of a surface (in this case, the white background), maybe some tossed partway on top of others.
2. For the film content, I wanted an image of a 16mm film strip with screen captures from the films displayed as if they were each frame. I can do this with an image of flat 16mm movie film with the screen caps sized to fit the frames, but I'd *really* like to make that film sort of wavy and/or looped. Is there a way to warp a flat image like that into something that looks convincingly wavy, as if the film was just taken out of the canister?
View 1 Replies
View Related
May 3, 2007
I learned from Scott Kelby's book on a technique to remove color cast.
What is the difference between color cast and correcting white balance?
View 3 Replies
View Related
Mar 8, 2014
how do i scan negatives to the computer and convert to pics using photoshop 8
View 4 Replies
View Related
Mar 17, 2014
How can I scan transparencies, colour negatives and B7W negatives into Elements 12?
View 7 Replies
View Related
Jan 25, 2014
When scanning negitives, is it possible to change it to a positive image?
View 2 Replies
View Related
May 27, 2013
I am very new to Photoshop and I have a photo that has been in a frame therefore the middle of the picture has discolored leaving a circle which is a different colour. I am using Elements 9.
View 5 Replies
View Related
Feb 28, 2012
Is it possible to just simply work with the highlights in a shot (for example boosting the gain), without having to work with selective, or masks, and without changing the color? Cause there is the 'wheel' for highlights, but as soon, as you turn it in one direction, you start to change the color.
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 6 Replies
View Related
Oct 30, 2011
My director friend has seen me color correct images in LR with grace and skill, and wants me to start doing color correction for his films. I have never used Final Cut Pro before, and wondered if the controls in Final Cut were similar to LR, if you could export and import between the two, and generally what the difference was between working with color in each. He has one of the RED cameras, which shoots in RAW, so I assume the different can't be too great.
View 1 Replies
View Related
Apr 13, 2013
I'm looking for a way to scan directly into PSE 10 with my negative scanner. Maybe a plug-in? I know it's unlikely that there's something to convert the image to positive etc but I'd rather spend time doing that than use the bundled software with the scanner (SilverFast). However, currently Get From Scanner gives me "Film Scanner" which either previews and scans black negs or doesn't work at all without Silverfast installed. Seems the only way to set it up as a TWAIN scanner (yep, got TWAIN plug-in) is to use a seperate piece of software like silverfast which is then launched to get the scan. Got correct and up-to-date drivers properly installed.
View 4 Replies
View Related
Jan 22, 2013
Using ver. 4.3 with Win7.
I'm trying to get Lightroom to display only the photos I select in Grid View in the film strip but
View 4 Replies
View Related
Feb 6, 2013
On LR 3.6 I cannot view my photos on the film strip in the LIBRARY setting. On DEVELOP I can view on photo at a time on the film strip (the rest of the photos are not viewable). This is a new problem which has only occured on the last two imports.
View 3 Replies
View Related
Dec 22, 2013
New to PSP and I took some night time photos of a car using long exposure, the pictures are clear and focused but they have that yellow-orange street light tint to them. Is there an easy way in PSP X6 to get rid of that color cast?
I'm shooting in RAW in Large with a Nikon D5100 if that matters for this. I'm not bothered how I output it as up to now I've just experimented on screen. No error codes yet!
View 4 Replies
View Related
Jul 18, 2013
I have Elements 6. I am retouching all our family photos. I have some from the 80's (color) that have taken on a red hue. What are the ways I can return the color to original?
View 2 Replies
View Related
Mar 3, 2012
Is there any way to use the "old film" effect, but keep the original colors. I really enjoy the look of the scratches and dust, but I do not want a grey movie.
View 2 Replies
View Related
Jul 4, 2013
What do I have to do to print borderless photos on a LaserJet Pro 200 M251 nw printer?
View 2 Replies
View Related
Mar 19, 2004
I'm capturing television frames using a TV capture card, but the resulting images do not have the correct brightness/contrast and color values.
Instead of manually altering every image using trial and error, I'd like to take a "correct" source frame that I know is correctly balanced (such as a test pattern), and use it to correct my other captured images.
I've tried saving the source frame's levels and curves and then loading them into the captured frames, but this doesn't produce quite the effect I'm looking for.
View 3 Replies
View Related
Jul 10, 2013
What is the best way to color correct the very blue photos taken underwater scuba diving? Most pictures were take at about 50-70' depth with an Olympus point and shoot fe-360 with an underwater housing. The camera was set on the underwater scene 2 setting. I just want to get the vibrant colors back that were present in the great corals, sponges and fish in the BVI's.
View 9 Replies
View Related
Mar 22, 2013
The colors on the computer monitor do not match the colors of my printed photos. The pictures have a yellow color cast. I am printing using HP Photosmart 7520.
View 1 Replies
View Related
