Photoshop Elements :: Any Quick Way To Brand Photos?
Dec 17, 2013What is the quickest ways to "brand" my photos?
View 2 RepliesWhat is the quickest ways to "brand" my photos?
View 2 RepliesWe just bought a brand new iMac for the office (OS 10.8.2, 2.9 GHz Inetl Core i5, 8 GB 1600 MHz DDR3) also bought the new Adobe CS6 standard but PHOTOSHOP and INDESIGN keep hanging.
- I haven't been working on large files
- They don't hang when I use the type tool
- I've fideled around with the scratch disk thinking maybe it was the issue, and the first time it got better but then 2 days later it got drastically worse.
- I un-checked 'auto save file in background' on PS6
- I've uninstalled and re-installed PS and iN
- I've been to every forum
- I've sent crash reports
I just walked in to work, switched it on and I can't even get to General Preferences on PS6.
I had a HD crash recently and I am attempting to re-install PS 7.0 on a new HD with Windows XP Pro. The installation goes flawlessly, but afterwards, when I launch PS, I get an error message that PS cannot initialize because the scratch files are full.
View 5 Replies View RelatedI had a 3 year old imac with CS3 installed, which has failed. I have bought a brand new imac 27", but I was told in the store that this machine is too new to use CS3!
Is it the OS thats too new or the hardware? I'm happy to downgrade my ios to snow leopard or something like that.
I'm having a problem where opening any previously saved photoshop document causes pen pressure to stop working. Upon opening any previously saved document, I get a little warning icon guy next to any parameter set to pen pressure control in the brush pane. Hovering over the warning icon gives me a tooltip that says "Control by pen pressure requires the use of a pressure sensitive tablet".
If I open Photoshop and create a brand new document, everything works fine. But once I open any previously created file, pen pressure completely stops functioning until I restart Photoshop, even if I create a new document from that point.
I'm using a Cintiq 21UX (driver version 6.3.4-3) with Photoshop CC (14.1.1) on a Windows 7 machine.
Here are my specs:
Mac
OS X 10.8.2 Mountain Lion
3.2 Ghz Intel Core i3
8 Gb 1333Mhz DDR3 (was running 4 gb. an apple specialist just installed another 4 of Crucial brand. I wanted 16gb, but apparently I got a Mac in mid 2010 when it's finicky about it's Ram. Ugh)
Photoshop CS5 12.0.4 x64
Brand new 1 TB Toshiba External Used Only as a Scratch Disk,
Available: 999.35
Used 848.3 Mb
Files: 73
Folders: 14
Mac OS Extended (Journaled)
1 TB internal on the Mac that is checkmarked as secondary Scratch.
I'm working with Jpeg image files, mainly using Batch Processing. This error is usually occuring when I go to save my files, but today it occurred in the middle of using Content Aware. My crop tool is set at 250 resolution, and today I hadn't even cropped yet. Mac was freshly restarted last night and only a few picures edited after I restarted, so all memory should have been mainly purged. (although I had used content aware on one picture last night after restarting, a pretty large corner of a studio backdrop)
Should I be partioning my external? Is this TOO much space? My thinking was an empty hard drive wouldn't have to be searched, but I really probably don't know what I'm talking about.
I never got any errors when I was using my internal HD on the Mac, it was just slowing down after using Batch Processing and Actions. (I edit for a photographer) I do realize I should be using Lightroom. I have Lightroom 3, but I just don't have the time to learn right now, as this is the photographers busy season.
How can you undo quick fix?
View 1 Replies View RelatedI am creating graphics like a scroll and need uneven edges without having to draw over everything (and wobbling) with lasoo tool. Is there another quick way to get an uneven effect?
View 2 Replies View RelatedIn premiere_elements_12. I'm on lesson one.Iv'e loaded the clips, selected video editor but the bar at the top does not have quick view as an option so I clicked media and it took me to a different place.How do I go back and get to the view where quick is an option along with guided and expert.
View 1 Replies View RelatedWhere is the Quick Selection Tool in PS Elements 10?
View 1 Replies View RelatedI have tried to upload the software many times with no luck. I also have Elements 11 on the same computer and it works very well. I do not understand why 12 will not work. Since I first installed 12 I have been using it in the Expert mode which seems to work.
View 2 Replies View RelatedSeveral months go I installed Photoshop Element 11/ Premier Elements. Both worked fine. Now in Elements I cannot access the Quick or Guided Editing space whereas before I could. Can only access the Expert Space now. Did not fool with any of the settings.
View 5 Replies View RelatedI have bought yet another Elements and this one doesn't work any better than the last one did on Windows 7. I am sick of wasting money and time! Last time I was out the money and just had to continue using Windows Movie Maker.
View 1 Replies View RelatedCan I resize a Quick Selected image so it fits when I cut and paste it on a new background? I am trying to take a photo of someone and place it on a different background. The Quick Selected image is too big when I paste it on the background. You can only see a small portion of the persons head.
View 2 Replies View RelatedEvery time I open a photo from explorer, Lightroom or somewhere else, Elements starts in quick mode. I never want qick mode, I want to use experts mode as default. How can I do this?
Plus, is there a way to get rid of the bar on top completely? It takes up valuable screen space and is completely useless.
How would you go about creating a Cattle Brand? I'm trying to create something simple using the letters "dP" to produce something along these lines:
I want to have a textured background that resembles hair (does not need to change shade, though) and a way to make a rough looking outline for the letters.
I've been using Elements 11 on my Pc (Windows 8) for ages with no problems, but in the last couple of days, almost everytime I launch Elements it will automatically switch from Expert to Quick.
View 3 Replies View RelatedWhat the default settings are for "hardness" and "spacing" on the brush dropdown for the quick selection tool in PE 10?
View 3 Replies View RelatedI have used PSE 5 happily and greatly liked the auto sharpen feature. I have been forced to upgrade to PSE 11 due to Windows 8 incompatibility with 5.
I am appalled to find that the sharpen feature, including auto, does not work in Quick or Guided modes. The small previews in Quick mode show the correct sharpening effect but clicking on them or using the slider does not transfer to the main image. I either have to go into full unsharp mask, which I hate for quick fixes, or use the 'adjust sharpness' option under 'filter' in Quick or Guided Mode, which increases sharpness by an unspecified amount on each click.
I'm trying to get use to this quick selection tool , i have an image i need in the middle of the photo and all round the sides i want to whiten, the tool once draggin down either side selections all the picture no mater what setting i use,
View 4 Replies View Relatedhow do i disable auto-start in Adobe Quick Launch; elements 3.0
View 1 Replies View RelatedHow do I make it work
View 5 Replies View RelatedI'm looking for a solution about the omission of lens brand in the Exif data generated by Lightroom (even 4.2 version).
I know there is some discussions about this topic, but I didn't find anything specific with brands of lenses.
When I export with Aperture, correct Lens ID appears in the Exif data:
Eg Lens Model: Canon EF-S 18-55mm f/3.5-5.6 IS
But when I export the same CR2 file in Lightroom, "Canon" is omitted, I got:
Lens Model: EF-S 18-55mm f/3.5-5.6 IS
Same thing with pictures taked with my Sigma and Canon family.
In my case this is a "problem". I need Exif tags containing lens brand for an accurate process with others softwares, for example with PTGUI to generate spherical panoramic.
"Add people" feature has never worked in Elements 11. How do I fix this? It recognizes faces in individual photos, but not in groups of photos.
View 1 Replies View RelatedWhen opening my jpeg photos in Photoshop elements 9, once saved elements seems put the image in a format that my Apple Mac isn't compatible with. So when I then try and upload the images to Facebook or other software in a bulk upload the images are highlighted and I therefore can't select them and upload.
View 16 Replies View RelatedSomehow in starting to use Elements all photos have been duplicated.
How do I delete the duplicates without going through thousands of photos?
How do I stop the program from creating and saving thousands of duplicates?
New user to PSE11. Is it recommended that ALL photos be in albums or is the idea that photos in albums are a subset of the photos in folders? With all the sort and search functionality, I don't understand the benefit of albums.I name my image folders using a standard naming convention with the date embedded so it makes them rather easy to manage.
View 1 Replies View RelatedThe instructions in Adobe Photo Elements 11 Classroom In a Book are the classic Windows "Drag and Drop" Method. However, when I try to do it, the cursor/icon I am dragging turns into a gray circle with a gray diagonal when it reaches the Media Browser pane in the Organizer and the folder/photo is not imported into the Organizer when I "drop." Do I need to change setting in Windows (Vista, SP2) or Photoshop Elements 11?
View 3 Replies View RelatedMy photos are OK in the Organizer, but the portrait photos are cut off at the top or bottom when used in a slide show. I have checked the "Crop to Fit" portrait selection but it makes no difference. I have Version 9 of Elements.
View 1 Replies View RelatedI just upgraded to photoshop elements 11. When I attempt to sync photos in iTunes (to synch with my iPhone), Photoshop Elements appears in the drop down and when I select it, it finds all the "albums" in the catalog. However, when I select an album to sync, iTunes indicates 0 photos are available in the album.
I'm running photoshop elements 11, iTunes 11.0.1.12, Windows 8 Pro.
if I try to sync "all photos and albums" it still reports that there are "0 photos" available to sync.
I've tried to make new albums, which iTunes "sees" the names, but there are "0 photos" available to sync.
I've also tried to sync with a folder (file system) which works just fine.
I can not paste photos from my photos file. If I start a blank file I can paste anything photos want from the web in as many layers as I want. If I try to paste a photo from my own photos file it becomes the back ground by itself. I don't know how to stop this. Using photoshop elements 11.
View 2 Replies View Related