Several months go I installed Photoshop Element 11/ Premier Elements. Both worked fine. Now in Elements I cannot access the Quick or Guided Editing space whereas before I could. Can only access the Expert Space now. Did not fool with any of the settings.
View 5 RepliesI have tried to upload the software many times with no luck. I also have Elements 11 on the same computer and it works very well. I do not understand why 12 will not work. Since I first installed 12 I have been using it in the Expert mode which seems to work.
View 2 Replies View RelatedI have used PSE 5 happily and greatly liked the auto sharpen feature. I have been forced to upgrade to PSE 11 due to Windows 8 incompatibility with 5.
I am appalled to find that the sharpen feature, including auto, does not work in Quick or Guided modes. The small previews in Quick mode show the correct sharpening effect but clicking on them or using the slider does not transfer to the main image. I either have to go into full unsharp mask, which I hate for quick fixes, or use the 'adjust sharpness' option under 'filter' in Quick or Guided Mode, which increases sharpness by an unspecified amount on each click.
I bought elements 11 and while in editor, i cannot get the "guided" tab to initialize. The other tabs work jut fine, but the guided tab will not open. This is the one that will probably be used the most. What do I need to do? I am using the MAC version.
View 2 Replies View RelatedI have installed actions / effects which i have paid for and have finally got them working in EXPERT mode but now when I go into GUIDED mode into PSE 11, I have no editing options to chose from (for example the cropping option, straightening, vignetting, EVERYTHING is gone)
What have i done and how do I get these options back?
My guided tab options are missing on my pse 10 what shall I do? I have a PC
View 5 Replies View RelatedI recently downloaded a photoshop action to PSE 10 and now my guided view is blackened out.
View 1 Replies View RelatedThis was originally posted under 2009 - but I have this issue in 2010!
The old post was: Block Editor Posted: Aug 1, 2008 7:01 PM
When I go into block editor, edit the block then close it out. My cursor is really jerky in model space. Especially bad when I go into a command and try to select something. The only way to get rid of the jerkiness is to close auto cad and restart it. Is there anyway to cure this?
I have 2010 and am experiencing this exact same problem. It is intermittent and will sometimes 'go away' after a few minutes. Block editing is definitely related as a cause. I use SDI = 1 predominantly and it seems to be session independent. In other words one drawing session is experiencing the problem but jumping to another concurrent session exhibits no issues.
Task manager shows off the chart 99% plus on process ACAD when it is occurring.
Palette transparency is off globally. I have installed the latest NVidia driver for my Quadro NVS 285 video card. I am running a 3GHz P4 with 4 Gigabytes of ram - Dell Precision 380 workstation. Block Editor background color is default.
Restarting AutoCAD does make it go away - for the moment - but it is soon back. Even closing all tool palettes has no effect.
This does seem to be drawing specific - 2010 seems to be sensitive to something in older drawing blocks - prototype drawings from hotel vendors for instance - most likely inherited from a third party DXF process exhibit the issue heavily - and blocks from these drawings to a lesser degree. I have to constantly purge, audit, and wblock/replace my drawings to keep them clean. My default file type is 2010 which 'seems' to work, but it still happens. Audits show constant drawing errors cropping up, and repeating an audit, shows the same errors until a wblock replace is performed.
Using the editing "Guided" mode of Photoshop Elements 11 the working progress line hangs at 75% and Guided mode not works ! The "Quick" and "Expert" mode, instead, working well. I specify that I use Mac OS X Lion 10.7.5 and I don't have Antivirus or Firewall activated..I have already tried to delete all Preferences, all Elements 11 cache folders, etc., tried to uninstall and re-install the Software..
View 21 Replies View RelatedI get black blobs whenever I drag my cursor to mark the area specified to be in focus. Am I missing a setting to make that blackened area invisible? When I click "done" the part of the photograph to be in focus is still covered with black.
View 1 Replies View RelatedPS Elements 10 crashes when I select quick edit and I get no response when guided edit is selected. Auto edit is working.
View 1 Replies View RelatedIn Elements 9 when I am doing the frame and click to commit my frame disappears and I quick selection tool on the Guided section does not work.
View 1 Replies View RelatedI have Elements 11 (version 11.0), running on Mac OS 10.7.5. The QUICK and EXPERT modes work well but the GUIDED mode never stops initializing. I see that the initializing window opens when I switch to QUICK but when I switch back to GUIDED the Initializing bar is always somewhere in the middle and never moves to the end.
View 10 Replies View RelatedI have a Mac running OS 10.7. I have Photoshop Elements 10.
When I select the Guided Edit tab, there are no options available. The only tools are zoom, hand, and set foreground color. Everything else is gone. The open file is centered in the blank page, and most of the menu items are unavailable, with the exception of filters.
I have uninstalled and re-installed the program and rebooted. I have also deleted the two database files, as suggested in another post, and they were rebuilt.
I have read enough of the help file to know that there are supposed to be guided edit options available, such as actions, enhance colors, etc. The menu bar has very few options available from the guided edit window. In fact, the only way to get back to the full edit window is to shut down and restart the program.
When I try to use the guided edition start to load but neves finish.
View 3 Replies View RelatedJust getting used to elements 11 - the tilt shift in the guided edit does not change when I click on the icon, then click and drag. I am sure I am following instructions correctly, but nothing changes when I try to rezone the area I wish to have showing without blur. I could do in operation in the expert mode, but it should work in guided edit.
View 7 Replies View RelatedI bought and downloaded PSE11. However, I don't think I disabled my virusware. It took an especially long time to download and I don't know if it downloaded correctly. My blur tool does not work and my "guided" options are not there. What is the easiest fix- uninstall and remove the serial number then reinstall using same serial number? My question with this is- how many times can I do this, and or is there an easier fix? I have PSE11 and LR4 and I am going back and forth between which one to use. I really need all the options to work from PSE11.
View 3 Replies View RelatedAccidntly hit view hidden files. Tried view all files. Can not access my files. Got message "this file and other files are locked. How do I get my files back? Are the pemamently gone?
View 3 Replies View RelatedI have not used PSE in 2 years; when I open it, no new pictures have been added. At the bottom of the welcome page it indicates it is accessing customer info, but this has been going on for 18 hours and nothing new is added. I have rebooted twice.
View 2 Replies View RelatedI only had Adobe Photoshop for about 2 months now. I have been using the Low Key tool in guided alot. Here recently I went to edit a photo and my reduce effect button tool will not work. I tried everything from restarting my computer and the program. I love using this tool but I can not get the reduce effect to work.
View 5 Replies View RelatedI am unable to choose anything in Preferences in Adobe Elements 9 Organizer in Elements 9.0.3. Every time I try the program crashes. I have checked for updates and cannot find any and have even gone so far as to uninstall and re-install the software - no luck.I am using OSX 10.9.2. Preferences works fine in Photoshop Elements just not in Organizer?
View 8 Replies View RelatedI have successfully carried out a trial back up of an Elements 6 2000 picture catalog from an XP based PC, using the Elements 6 full back-up process. This process is intended to be used eventually to transfer this and other catalogs onto a new Windows 8 PC installed with Elements 11.
However, in the interim I would also like to be able to access the picture files and the catalog data on the ehd from a Vista based laptop which also has Elements 6 installed. How to do this without carrying out a full restore process that would load all of the files onto my laptop's hard drive.
In transferring the picture files to the end I also seem to have lost the original file structure that was on my PC, as folders have been renamed numerically and are all held individually in the main folder of the end. Whilst this doesn't matter too much whilst the files remain on the end, provided the catalog still know
I am working on a script that performs a series of things on all of the artwork in a document. At one point, it needs to compare the fill color of every item to a sample color. The problem is, the artwork is a collection of compound path items and path items. When I look for pathItems[x]. fillColor, it works fine. When I look for compoundPathItem[x].fillColor, it comes back undefined. So, I've moved to looking at page items, but I seem to be unable to get to the internals on the page items. If I have a compound path item, how would I address its properties from its parent page item? I tried:
pageItem[x].compoundPathItem.pathItems[0].fillColor,
pageItems[x].fillColor, &
pageItems[x].compoundPathItem.fillColor.
How can you undo quick fix?
View 1 Replies View RelatedI am creating graphics like a scroll and need uneven edges without having to draw over everything (and wobbling) with lasoo tool. Is there another quick way to get an uneven effect?
View 2 Replies View RelatedWhat is the quickest ways to "brand" my photos?
View 2 Replies View RelatedIn premiere_elements_12. I'm on lesson one.Iv'e loaded the clips, selected video editor but the bar at the top does not have quick view as an option so I clicked media and it took me to a different place.How do I go back and get to the view where quick is an option along with guided and expert.
View 1 Replies View RelatedWhere is the Quick Selection Tool in PS Elements 10?
View 1 Replies View RelatedI have bought yet another Elements and this one doesn't work any better than the last one did on Windows 7. I am sick of wasting money and time! Last time I was out the money and just had to continue using Windows Movie Maker.
View 1 Replies View RelatedCan I resize a Quick Selected image so it fits when I cut and paste it on a new background? I am trying to take a photo of someone and place it on a different background. The Quick Selected image is too big when I paste it on the background. You can only see a small portion of the persons head.
View 2 Replies View RelatedEvery time I open a photo from explorer, Lightroom or somewhere else, Elements starts in quick mode. I never want qick mode, I want to use experts mode as default. How can I do this?
Plus, is there a way to get rid of the bar on top completely? It takes up valuable screen space and is completely useless.