I want to edit a commerically available movie's cover. The movie is The Crush, here is the cover:
Basically, I would like to remove the words and title from the cover but I want it to look like it was never there. Is that what layers are?
I'm extreamly new to this type of stuff and I'm completely lost already. I'm using Photoshop 7.0
How do I do this? I can't really understand the tutorials online.
I can't seem to change the text layer in this logo I have attached. I thought if I click on the layer I would be able to change spelling. Do I have to delete the layer and add a new one?
View 1 Replies View RelatedThe frame i have modeled has a cut out section. How would you cover up / blank off the cut out section in the frame?
Inventor 2013
I have an image with a text layer and another text layer. The text on one layer overlaps an area of the text on the other layer (which I want to do).
But what I really want is for one of the two overlapping sections to be behind the other to give the appearance that the two text objects are intertwined. I have attached the image to this post. The items I am talking about are the two sections of the large orange "C" that cross over the large blue"C".
I would like to create a printable document that would allow a text message to be hidden by a red textured top layer until viewed with "decoder" red glasses. Any help in creating this or pointing me in the direction of a sample that could be broken down and the hidden text edited would be appreciated.
View 3 Replies View RelatedHere's my question re: editing an exisiting mask in CS6.
So, say I create the basic selection with the quick selection wand - for this example, maybe a selection of a horse.
But, if I don't get the area between the horses legs and want to select that area with the pen tool then delete it from the exisitng mask (i.e. clean up the mask with the pen tool) how do I do it?
I've seen lots of tutorials that talk about adding selections together, but that doesn't work in this case because my secondary selection is within the original selection.
I know this can be done with the brush tool (cleaning up masks) but I'd like to do it with the pen tool because the results are better.
I have adobe photoshop CS5 version 12.1. Is there any way to add on the video editing component without having to purchase the whole Premiere package?
View 6 Replies View RelatedSomeone said that photoshop causes blurring when used for text in the printing stage on a cd cover.
How do I check to see if jpg images have been saved at a resolution of 300 dpi?
What if my original jpg image resolution is less than 300 dpi and I require 300 dpi; Is it possible to resave them to a smaller image size and in doing so increase the dpi?
What if a jpg image says it is ?.jpg @ 25%RGB? and I am supposed to save the files in CMYK; What is this ?Mode? setting and can it be changed through resaving the jpg somehow, or is it changed to CMYK when you open it in Photoshop and choose CMYK in the'Rasterize Generic PDF Format' window?
I am using XP and Photoshop 7
I am building my second book with Blurb, this time with LR4
it's going to be a small square and for the back and cover, I have built a file with photoshop and when I drop it to first page, no way I can "slide" it to cover the entire back+ cover
see my problem [URL]
I have a set of styles created in 2010, the company I currently work for needs to have new styles added and I would like to use some of the styles I created to make my life a bit simpler in this process. I have created an Overall.dwt file using the current styles the company i work for has and I have imported my styles into this dwt. As im renaming these styles for my new company I noticed under the general tab for text style and block style I have text and block styles with my old companies name but i cant seem to find where the blocks or text style is being pulled from so i can edit it with a new name. So my question is where are these styles being saved so i can edit them
View 3 Replies View Relatedhow can i edit or delete exit menu or sub menu or item menu?
View 2 Replies View RelatedI am having trouble editing existing imported toolbars. Also, I cannot retrieve my custom toolbars into 2012. When I convert older menus (mnu) into 2012 the tool bars all have question marks on them, and my custom toolbars are not listed. I cannot go into CUI customization and click on a button to edit it's command and or icon. The older version of cad is not on my new system so I cannot use the migration tool.
View 9 Replies View RelatedI have some xrefs that have text masks that mask out my objects, moved the sort order to rear (back) but they still hide my objects. Is there any way to simply disable them in the original xref?
View 5 Replies View RelatedI have an existing font I I want to chop and change about eight characters of the font. The changes I need to make are very small slight change to the stand of the A.
I'm very new to corel draw - I have tried reading the tut's on creating your own font but I think it is a little overkill for me needs.
Can I convert an existing font to curves do the slight changes then export it as a TTF ?
How to edit an existing vector in perspektive tool. Got an Domino Stone Vector and want to put in another perspective and dont know how!?
View 1 Replies View RelatedI need to hide the dotted boxes that are now showing in X3 around all paragraph text on maybe 1000 business slides I created 5 to 10 years ago and now want to update.
Changing to artistic text does make the dotted boxes go away but is there a master setting that would make them go away in paragraph text?
Five to ten years ago I created maybe 1000 busness slides in CorelDraw and then moved their images to Powerpoint. Versions used were 11 and X3.
Now when I want to dust them all off and freshen them I find dotted boxes around .
I have a Book Cover for an ebook that I may change. So there is some text I want to replace.
Is there some way I can do this with Paint.Net.
I created a basic layout with some boxes in Dreamweaver. I set the Overflow property on them to "Hidden". I then opened the page in Edge Animate. However I noticed that when I import stuff, such as an image, then try to drag it into one of the existing DIV's, it won't work. It stays on top of all the other DIV's. However if I create a box or some other sort of DIV directly in Edge Animate, I can drag the Image element into that, so it's enclosed within that DIV.
I guess the workaround appears to be to embed the image into the DIV in Dreamweaver first, then open the page in Edge. However it would be nice to not have to keep jumping back and forth like that. Is there a way to do this in Edge Animate?
Also, I noticed when I select one of the DIVs I made in Dreamweaver, many of the Properties such as Corners, Shadow, and Filters are missing. Can these only be used on DIV's created directly in Edge Animate?
I am using C3D 2012. I have a pipe network catalog located on our office network server. I have a pipe size shown as 15" that is incorrect, it should read and label the pipe as 16" (see attached image). I don't know a lot of the workings how to edit this from 15 to 16 inch and what I need to do to get it correct for the other C3D users in the office.
View 1 Replies View RelatedHow to simply edit the text in the spine of hard cover, 40 page book in the book module? I can click into any other text window and edit and change attributes but I am locked out of editing text when it comes to the spine of the book.
View 5 Replies View RelatedPhotoshop CC up to date
5 years PS experience
Restart of file and PS didn't resolve the issue
Creating Smart Object didn't resolve issue
When attempting to add simple text on an individual layer, the layer is turning black. This prevents me from seeing the text I'm editing. When I move to another layer the text displays correctly. When I go to edit the text by clicking the image the layer goes black again. It is like editing text in the dark, turning the light on to see the changes, turning the light off to make the changes, repeat.
I have two attributes "REVN" and "REVD" in a block "ATT" that I would like to change (globally preferably) to the following.
(1) Existing text to keyboard entry text.
(2) Colour from existing to 10
I am a bit lost in the (command "-attdef" .......)
(defun c:atc ()
(setq rev (getstring "Please enter review"))
(setq dat (getstring "please enter date"))
(command "-attdef" .."ATT".."REVN"....."c" "10")..)
(command "-attdef" .."ATT".."REVD"....."c" "10")..)
)
I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
The only way I know to create a new character style is to create one, set the parameters, and then use it and apply it to text elements.
Is there a way to create a character style FROM existing characteristics of existing text?
I am clicking on a layer in GIMP, and when I click on the text tool, this dialog pops up "CONFIRM TEXT EDITING" "the layer you selected is a text layer but it has been modified using other tools. Editing the layer with the text tool will discard these modifications. You can edit the layer or create a new text layer from its text attributes."
with 3 options, Create New layer, Cancel, and Edit however, no matter what I click, it doesn't let me create new text anywhere.ALSO, it seems to jump from the layer i selected to another layer whenever I click "EDIT."
What is weird is that I was able to create new text prior to this, but not anymore. it's gimp 2.8.0
The image is basically a scanned copy of a letter. The image is in JPEG format and the size is around 200kb. Now I want to edit the image(the scanned letter). I only want to edit the content of the letter yani the text of the letter.
Specifically speaking I want to add some text in the image. The text has to be in the same font, size etc etc so that it does not looks like it has been editied.
i'm trying to follow this tutorial on how to make ice Text. Right in the beginning of the turtorial it asks me to create a new document so big...blah blah. It tells me to use the type tool to add some text. And then press ok and cut the text, then paste the text to automatically center it. Thats just it...it wont let me cut the text.
View 4 Replies View RelatedI have an image which is simply a one color gradient, with transparency from nothing to something. I would like to be able to access the existing gradient on the image and change only the color. I have hunted high and low and cannot see how to do this.
(I am familiar with how to make a new gradient and how to change the colors in a saved gradient via the gradient dialogue. But for the life of me, I can't see how to access an existing gradient on an image and change only this one parameter.
I have a type layer with some text in it (a headline, let's say). I click on the layer, I click on the Character Panel, and first thing I see is the color in the Panel is not the color of the font in the layer.
I then click on any Panel property, and the text in this layer is replaced by text from another layer in my document ( a paragraph layer, let's say), but the color is not the same as the layer the text came from.
Problem with text editing in Photoshop CS6. Here's an image - a compare between CS3.In CS6 in editing text mode when select all text & use Alt + keyboard "down" I have too big jumping values of leading. It's really make uncomfortable work to exactly adjustment spacing between the lines in text blocks.
In CS3 wasn't this problem, everything was excellent with leading & very comfortable work
This is first time I am using photosop, and I dont know much, It will be appereciated if any one could help me, I ahve to edit the text of a GIF file, there is a background in the GIF file and text is on top of backgroung image, I have no idea how to edit the text.
View 2 Replies View Related