Photoshop :: Customize - Brush Capable Of Picking Up A Pixel?
Oct 19, 2013
I am able to create my own customizable brushes BUT I want more, WAY more. I want a brush capable of picking up a pixel or a few and transform it/them into a bokeh, JUST WHERE they are.
The only tutorials I found are about making brushes, customizing them to do what ever but they create the same thing all over even if different sizes, scattered or whatever. Nothing about being able to have one that selects what is underneath.
Blur radius does not work, I tried and tried and tried again. If I still have hairs it because they are too short to pull and if the walls are still standing around me it is because I am wearing a soft pillow to protect them against my aggressiveness toward them (my wife was tired of paying for repairs).
View 3 Replies
ADVERTISEMENT
Aug 16, 2011
Would it be possible to have an option that allow color picking to pick document's pixel's color, rather than current layer's color with its opacity ?
I really never want to pick a color from a single layer. I always want to pick the color I see, and without its opacity, the one that result from the blend of all layer on the document's pixel on which I pick the color.
View 4 Replies
View Related
May 28, 2013
you can see what i mean in the following picture examples.
Â
Selecting a brush (any 1 pixel) brush
Â
[URL]........
shows my selection . Drawing a straight line
Â
[URL]........
Â
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
Â
[URL].........
Â
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation.  Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.Â
View 6 Replies
View Related
Mar 26, 2013
I installed Photoshop cs6 recently and have found painting in it extremely frustrating.When I customise a brush (for instance, turning off "transfer"/opacity), instead of allowing me to proceed with it, the brush automatically reverts to the previous settings after ONE BRUSHSTROKE!
I've tried resaving the brushes with the customisations without success- They still revert to the old settings.I'm using a Wacom Cintiq with a Windows 8 computer.
View 2 Replies
View Related
May 27, 2013
I recently discovered why I've been having trouble with precise drawing with my tablet, I keep losing track of the brush cursor, that circle is just too small, same for "precise" brush cursor (cross). I tried the standard brush cursor and it was much better but it lacked precision of telling where the stroke will start.
Â
Is there any way to customize the brush cursor, ie. add a mouse pointer/brush icon to that small circle like it's in PaintTools SAI?
View 1 Replies
View Related
Jul 29, 2009
i just opened ps, and was about to work on some client stuff.... same as ususal. hit the brush tool... no different from yesterday, same default settings, and my brush started doing some weird patterns... as if all the smoothing on the brush was gone. Looks like a bullseye when i apply the brush a number of times in one spot. (brush hardness = 0). very strange. I couldnt find anything wrong, and i didnt change my settings from the day before...? So i just updated my display drivers for my nvidia 8800 gts... and same issues... only with the brushes... gradients are still smooth? heres a screen shot of what im getting.Â
View 6 Replies
View Related
Sep 16, 2012
When I set my pencil brush tool to 1px, to make some pixel art, it is not 1 pixel, it adds an extra pixel to the left. I dont know why this happens, but im the height IS 1 pixel, but the width adds an extra pixel to the left or right (mainly left). even when i position it ExACTLY in the center of the grid, which is set to 1px by 1px, it STILL adds an extra pixel
View 7 Replies
View Related
Dec 11, 2013
this is probally the most noob question ever but I can't get a 1 pixel brush, 3x3 is the smallest brush I can get
View 5 Replies
View Related
Dec 31, 2008
I had no significant problem of creating a panorama picture by stitching HORIZONTALLY many (up to 35) pictures. Is PS capable of automatically stitching vertically too? The idea is to accomplish multi-raw panorama. That is, if in addition to a wide view, I want also the panoramic picture cover significant hight. The idea is to sweep the horizon at a certain vertical angle.
Then, sweep at a lower level and creating a panoramic view of both sweeps. If not fully automatic, then create a photomerge and create 2 panoramic picture. Then automatically stitch the two panoramas vertically.
View 8 Replies
View Related
Jul 9, 2013
I have owned Photoshop CS3 and CS5. I have used these products across 3 different computers, OSX and Windows in several different versions. I have used 4 or 5 different printers and each and every time my images print offset to the left of the page with about an 1 inch blank space down the right edge of the page. Portrait or Landscape, it makes no difference. I have tweaked the settings in Photoshop and the operating system and printer settings endlessly, all to no avail.why Photoshop isn't capable of printing an image centered on the page or borderless. I am currently using Windows 8.1 beta, an Intel i5 based system, a Canon MG6220 printer with Photoshop 5.1 64 and 32 bit.
View 1 Replies
View Related
Mar 27, 2013
I need to upgrade my graphics card. Question can either Photoshop CS5 or Light room 5 utilize double precision capable GPUs?Â
Â
Background: Application- photographic RAW files editing (no video editing.) Software- Photoshop version CS5 and Light room version 4, OS- windows 7 64bit, Hardware- Asus P8P67 Deluxe LGA 1155, Intel Core i5 2400 processor, 16GB SDRAM, SSD (apps/temp files), HD (archives), current video card- Quatro FX 1500.
View 4 Replies
View Related
Mar 11, 2011
I have just found out that LT is not capable of doing the text2mtext change.Â
Any short-cut?
View 9 Replies
View Related
Jan 18, 2013
I am wondering if the FEA in Inventor 2013 is capable of simulating a pipe under a point load and at what point the pipe fails. Its a simple 2in dia pipe supported by a vertical tube with a load of 'X' centered on the pipe.
View 1 Replies
View Related
Sep 28, 2012
Is AutoCAD capable of translating text (changing on the drawing) from one language to another?
View 6 Replies
View Related
Nov 27, 2010
If Video studio x2 or x3 is capable of editing video captured with this camcorder and is it a difficult process to transfer video into video studio ?
View 2 Replies
View Related
Apr 11, 2013
When I crop a picture Pixel Demensions become 6 bytes Width and Height 1 pixel each. I can no longer see the picture. How can I fix this?
View 4 Replies
View Related
Apr 22, 2013
I have two art objects on two layers. I want to match to the pixel the two objects that otherwise could be exactly the same but one layered object was imported slightly smaller.
The scale tool has good scale handling, I just want to measure the tool spots to the pixel to gain an exact scale size factor and match sizes.
View 2 Replies
View Related
May 12, 2007
It blows my mind that somthing this simple isnt all that simple. I used the eyedropper tool to slect a color from another photo, then used the brush while fully magnified to change the color of each pixel.
It was coming out a weird greyish color, and I noticed that if I clicked more than once, it got darker, but so did the pixels directly around the one i was editing. So, i copied both pictures, loaded them into paint, and went to town.
It worked, but then when i copied it back into photoshop, it had a black background (there was no background in the original pictures) around the sprite I was editing. I tried to use the magic wand tool to get rid of it, but it took parts of the sprite with it, so...
Is there any way that I can edit the color of a single pixel (or hell, even a group of pixels if they share the same exact color would be nice...preferred, even) accurately? If not, what program could I use that would keep the transparent background?
View 1 Replies
View Related
Feb 19, 2012
Via VBA macro, some way of getting RGB/CMYK color values of a bitmap pixel by pixel?
View 1 Replies
View Related
Feb 11, 2013
My eyedropper started picking the wrong color! I ahve reset and reinstalled PS - and still have this problem. No matter what color I click the eyedropper on, it picks a shade darker than what I want. Like I said, I am running PS CS6 on OS Mountain Lion.
View 5 Replies
View Related
Mar 5, 2013
Having changed the watched files folder, when I add a file, Elements picks it up immediately. However, I previously loaded a lot of files on e without realising Elements was only watching c. What is the best way to pick up those new files? (I don't think I can delete tham and start again.)
Â
Just get the media from the file, it imports it all then says it didn't import the old stuff as it was already in the catalogue. really should think about this more before I do anything.Â
View 1 Replies
View Related
Mar 13, 2011
I managed to remove the background, of an image,(A whit background) and put the image on top of a transparent layer. made a transparent image. When I place this image over a light color background, it looks fine, but when I place it over a dark color background, the edge of the image looks very rough and dirty, I think it's because some of the anti alias from the original image, how can I make it a clean image without going to delete pixel by pixel?
View 2 Replies
View Related
Jul 26, 2012
We are developing an application using functionality of Gimp´s channel mixer with java.
Our problem is that we don’t Know how channel mix works exactly for transforming pixel by pixel in Java.
For example,
We have an image an do on it the next mix:
Output Channel = Red
Red=200.0
Green=0.0
Blue=0.0
For simulate that, we transform all pixels with Red Component *2 and 255 (maximum) if is greater.
Our problem is:
Output Channel = Red
Red=200.0
Green=60.0
Blue=0.0
How can I simulate that?
View 1 Replies
View Related
Oct 31, 2012
Spell check in my adobe softwares are not picking up misspelled word, how do I correct this problem?
View 5 Replies
View Related
Mar 12, 2008
I have a weird problem which is either operator error (Most likely) or something wrong with my CS3. I am trying to set my text color to a standard blue (0000FF in paint shop or anything close) When I set it to that it displays the color in the little color box but when I apply it goes back to a purple color? All other colors that I pick seem to stay but not the plain old blue? 8bit 16bit 32bit it doesn't matter nor does changing the mode to RGB or CMYK or whatever! I do notice in the select text color box that next to my color is a warning box that says" Warning : out of gamut for printing" but it say's that on other colors that it will pick and stay fine.
View 4 Replies
View Related
Dec 6, 2012
I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.Â
View 5 Replies
View Related
Jan 31, 2012
How to get the block name in a drawing by picking the block reference in the drawing using vb.net?  Â
View 9 Replies
View Related
Jun 7, 2010
Lately I've noticed a lag after picking an object where my crosshairs freeze and I'm unable to continue. This lasts for a fraction of a second up to 5 seconds or more. IT seems to happen most when I select a hatch object.Â
View 9 Replies
View Related
Jan 26, 2012
I am using Map 3D 2012 and when I float the cursor over objects it highlights.The problem is that when I click on the object that is highlighted, it picks another object. I have gone through the options and can't find anything that changes this.Â
View 4 Replies
View Related
Feb 22, 2012
AutoCAD has been working on my laptop for many months. All of a sudden when I start AutoCAD and do the "open" or "new" command, the software says "not responding". If I set variable "FILEDIA" to 0 it prompts me for the file name. I have tried to repair, uninstall and reinstall the software and it does the same thing.
View 9 Replies
View Related
Aug 11, 2012
My properties button has quit picking viewports. When I pick the viewport outline, my properties dialog box say's "no selection" Sometimes I get a blank dialog box and have to repick the viewport to get the dialog box to give me information. However, it will not give me the information to set viewbox scale, or will not let me lock the modelspace area so that I can zoom without altering my scale setting. Is there a setting that has gotten changed or what. A week ago the command was working fine.
View 9 Replies
View Related
