I was making a web layout in Photoshop to use in Dreamweaver. (It is really just for a test to see how dreamweaver works...) Well, I had everything in the web layout sliced up correctly and when I tried to "save for web" it gave me this message...
''Could not complete this operation because an assertion has failed''
I have Lightroom 4 and as soon as I click to open the lightroom 4 application and message box pops up saying "assertion failed!" and then it doesn'tt open the program. I was working earlier but then my laptop has a bad battery and when I was editing in lightroom 4 my laptop shut off without warning (same thing as just pulling the power cable out of the outlet of a desktop when its on without shutting it off first). But anyways I have windows 7 and so I can get back to work. I was also hoping that I could fix this issue without erasing all the editing I did and all the pictures I have in lightroom.
View 1 Replies View RelatedI've never had problems doing this with Lightroom 3, just upgraded to Lightroom 4 and I can't seem to export anything. I also can't publish either.
View 9 Replies View RelatedI am not running any .net apps that are noit Autodesk's own and loaded by Autodesk without my direct request. I took a snapshot of the error window and then I tried the Retry option. AutoCAD C3D halted (crashed). I suspect Abort or Ignore would have done the same but idk.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
After upgrading to 3.5 from 3.4.1 I received this error when attempting to publish new photos to my harddisk. First I thought the problem may be related to access rights. I am running Win7, 64 bit. So I reset the read/write rights in the export folder and the LR catalogue and AppData folders. No success. Then I opened a new cataloge and imported the old one in order to start "from scratch" - no success, publishing collections were not importet. Finally I switched back to version 3.4.1, and ... it works again
View 5 Replies View RelatedAll of a sudden my ImageReady won't open and instead I get this "Could not fully start the application because an assertion has failed" message. I have tried reinstalling photoshop, but no luck. Can anyone help me with this?
View 9 Replies View RelatedI'm having trouble using the Save For Web function on Photoshop CS6. The initial dialog opens fine and I can select any file type to save to etc. Once I click 'Save...' I get the error "Could not complete this operation. An unknown operating system error has occurred."I have looked up this error and from previous threads I have tried deleting the Save for Web library files and restarting, however this doesn't work (Unless I am deleting the wrong file?).
I'm running a 2.6 GHz Retina Macbook Pro with the latest update installed for Photoshop. I have 16 GB ram.Strangely, I have a PC running the same version of Photoshop CS6 and it works fine for this function.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Mac OS 10.8.2
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2600 MHz
[code]...
I have at least 3 photos that seem to be forever stuck in edit mode as a result of the problem. It has happened with versions 10, 11 and 12 now.
View 1 Replies View RelatedI am using Adobe Photoshop Extended CS6. I have created a chart and add a timeline ( more than 400). When i am saving the gif animated file using Save for Web, I am getting am error. The error is : " The optimized image could not be generated, likely because it is too big and there is no sufficient memory. The image will not be displayed."
Also, I am not able to save the .jpg file. Is giving me the error : " Could not complete the operation. An unknown error has occurred."
I am trying to create a 150m buffer around points from a map features that I have attached from an SDF.
If I select any amount of points to buffer I get the following error:Unable to complete buffer operation
Using Civil 3D 2011 (come with Map 3D of course) 64 bit on a window 64 bit machine. Tried attaching sqlite db with no luck, then exported to SDF attached to dwg as datasource, themed, etc... tried feature buffer analysis again... same error.
what can I do when I get the issue "Could not complete requested operation". I can't open or work with files anymore. OS is Mac OS X Application: Illustrator CS2..I has already removed and new installed the application.
View 6 Replies View RelatedMy Illustrator has always worked fine but then all of a sudden when I go to open it I get a message 'Could not complete the requested operation.' and I have to click OK and it closes. I have un-installed and re-installed with no success. I have artwork to finish with a deadline of next week.
View 2 Replies View RelatedWe work on PC's with CS5 installed on approximately 7 seats. One artist posted this error message asking what do you do when you see this? Well now I'm seeing this message. Not funny. The problem started when I attempted to paste an template into a blank document. There was a conflict between swatches. I'm not sure how many there were, around 200 or so. Each one requireing me to click OK.
View 9 Replies View RelatedI get an error "The operation cannot complete due to an unknown error" when I copy paste ax XL graph from MS excel to Illustrator CS6. This happens only when I paste the graph created in Win7 but when I paste the graph created in XP, it doesn't throw any error and works fine. why get this error only with the graph sheets created in Win7
View 3 Replies View RelatedI am not able to open the tutorial files in the getting started tab. I get a script error "could not complete the operation due to error 800a01ad" for both the tutorials and the help files. I have Windows 7 64 bit SP1, IE 9. I am not getting script errors with any other web sites.
View 4 Replies View RelatedI try to install vsx6 on my windows 8.During the installation a message appear : "Operation failed with 0x8007047F. The specified program is not windows or ms-dos" when i close this message, the installation continue and finish successfully !I can open it, but i can't manipulate video or something else. The application failed and must be closed !I try to install on my old windows XP and that works fine !
View 1 Replies View RelatedI am using Cable and Harness (Autodesk Inventor 2012 64 bit on Win7 64bit) and when trying to create the segment I only get the error message "The sweep operation failed for the harness segment Segment1 Adjust the segment geometry and try again". It does not matter what data for diameter and bend radius I am using under "Harness properties", it never works. When checking the "Bend radius" for violation it says nothing. I am attaching the files.
View 2 Replies View RelatedI am having “Out of RAM” issues with operation CS6 can handle with no problems.Memory allocations (access) seem to be a problem. CC and CS6 preferences are set the same. I have 9GB of RAM on a 64-bit Windows system, and the RAM allocation is set to 85%. Sometimes a file from the RAW converter will not open.
View 15 Replies View RelatedHaving trouble with save for web. Error message is ' The Operation could not be completed" Using XP, CS6 image size 367 kb resolution 72
View 9 Replies View RelatedPictures are not shown in the small window in Bridge, and if I click on a thumbnail, it opens CS with the message: The operation could not be completed. Not enough space.What can I do?
View 15 Replies View RelatedI keep getting this error
Operation could not be completed, not enough space on disk
cs2
xp pro
3 gig ram
20 gig open on c drive
296 gig open on G drive
c drive set as first scratch
g set as second
current file is 16 x 20 at 300 dpi
pentium dual core....
I have literally HUNDREDS of pictures that I want to put up. (There are a *LOT* more than what's up there now) I have to perform the exact same basic operation on all of them and I'm getting repetetive stress disorder.
The pictures are all extremely high quality so I obviously need to reduce it before I put it up. I take each picture file, reduce the width to 600, height to 450. Go to blending options, add a small bevel/emboss then save it as a medium-high quality jpg in a new directory with the same filename. (keeping the original high quality pic obviously) I then resize it to 200 pixels wide and save is as the same filename plus _t at the end to create the thumbnail picture.
Extremely basic stuff, but I have to do it over and over and over. Is there *any* possible way using photoshop and/or any other program or any combination of programs so I can automate it?
edit: On a side note I'm planning to re-do the entire site in php now that I've got a real host. (*note* the dns hasn't propogated yet thus the strange url) I want to make it so people can submit comments to all the pictures.
"OPR" has been set up to help people recover damaged photographs from the effects of Hurricane Katrina. If you check out the Operation Photo Rescue Blog that will give you all the information you need. I found the details of how to offer help on Week 5. They ask for various levels of competence in photo restoration and ask you to repair some sample photos so they can assess what level of damaged photos you may be able to fix.
View 3 Replies View RelatedI just bought Photoshop CS5 and I have a problem with HDR pro . when I am trying to mount 3 images together it act in a strange way ( the images appear and disappear many times) then when the window with the result appear and I say ok it open up in photoshop as a single image ( in the layers there is just 1 photo) and when I am trying to work it up with the Plug in/filter HDR Effex Pro (Nik softwear) a pop up window appear saying that the file is missing and the operation it is not possible.
View 1 Replies View RelatedI am getting. I'm running Win7 64bit, photoshop cs6 (also 64bit), have an i7 2600 and 16GB of RAM and an ati 5870 card running the latest drivers (12.8)
So, the operation could not be completed whenever I try to run the oil paint plugin and when I try to use the iris blur, my canvas goes blank. If I pull it out of docked mode and put it in a window, it's still blank until I move the window about and I can see my image, but as soon as I stop moving the window around, it's blank again.
having problems with our new Minolta Pro? Using CS and when accessing the TWAIN for the scanner--it is still giving us errors pertaining to the SCSI ID (error #4 cannot locate SCSI ID or # ) We switched out the SCSI card for a Firewire?? How do we fool photoshop CS and XP Pro >> into thinking the firewire is the access to the Minolta?? Code:
View 2 Replies View RelatedIs it possible to downsize a folder full of 5MB photos all in 1 operation? If so, which version of photoshop will do it?
View 8 Replies View RelatedAfter installing Photoshop CS6 I am unable to scan from within photoshop. I went to the Epson website and followed the instructions given but still no scanner shows up in the File > Import command. I am also unable to complete the crop and straighten photos command from the File > Automate menu, I get a dialog box that states "A required operation is unavailable." I have used this feature for many years and it has saved me many hours of scanning, I need this to work.
View 1 Replies View RelatedHow can I print several pictures on separates pages in one operation? Now I have to do them one at a time!
View 1 Replies View RelatedI have tried installing adobe photoshop cs4 and It successfully installed, BUT after I successfully typed the seiral number I was in he stage where I had to accept a licence and when I tried to do this it just stopped and do nothing. I have tried it a many times without any satisfactional results...I can uninstall any adobe application through add or remove programs and creative suite uninstaller.
There are like 30 adobe applications on add or remove program list and I cannot remove any...
following adobe applications are:
Anchor Service CS4
Adobe bridge CS4
Adobe Cmaps cs4
adobe color - photoshop specific cs4
adobe color eu extra settings
adobe color ja extra settings
adobe color na recommended settings cs4
adobe color video profiles
[code]....
I have many of the KPT plugins and was working with them until recently when they all stopped working. Did Adobe come out with an update that rendered them useless? I get the error message "Could not complete the KPT FraxFlame II because the program could not be found." This message appears on all the KPT filters.
I was using the 32 bit version of Photoshop on a Win7-64 machine.