Pictures are not shown in the small window in Bridge, and if I click on a thumbnail, it opens CS with the message: The operation could not be completed. Not enough space.What can I do?
View 15 RepliesHaving trouble with save for web. Error message is ' The Operation could not be completed" Using XP, CS6 image size 367 kb resolution 72
View 9 Replies View RelatedI keep getting this error
Operation could not be completed, not enough space on disk
cs2
xp pro
3 gig ram
20 gig open on c drive
296 gig open on G drive
c drive set as first scratch
g set as second
current file is 16 x 20 at 300 dpi
pentium dual core....
I am getting. I'm running Win7 64bit, photoshop cs6 (also 64bit), have an i7 2600 and 16GB of RAM and an ati 5870 card running the latest drivers (12.8)
So, the operation could not be completed whenever I try to run the oil paint plugin and when I try to use the iris blur, my canvas goes blank. If I pull it out of docked mode and put it in a window, it's still blank until I move the window about and I can see my image, but as soon as I stop moving the window around, it's blank again.
I am getting the error "Operation could not be completed. (com.apple.installer.pagecontroller error -1.) Couldn't open "Adobe Photoshop Lightroom 4.pkg".
View 1 Replies View RelatedI cant load my update of lightroom 4 because of this error,?
View 5 Replies View RelatedTrying to install LR4 upgrade and it won't install.
Error msg when clicking the yellow package reads: The operation couldn't be completed.(com.apple.installer.pagecontroller error -1.) Couldn't open "Adobe Photoshop Lightroom 4.pkg".
My system is an iMac 3.06 GHz Intel Core 2 Duo w/ 4 GB 1067 MHz DDR3.Just upgraded to 10.6.3 Snow Leopard and the HD has 893GB available.
I downloaded LR 4.0 as an upgrade to 3 for my iMac. When I try to install, the error message I receive is Operation could not be completed ([url]... error-1). What's the problem?
View 4 Replies View RelatedIs there any way I can save my completed photoshop project as a .jpg file. I'm using photoshop cc.
View 3 Replies View Relatedphotoshop cs6 was working fine a few weeks ago. After not using it for about 2 weeks, I try opening a RAW file and I get this error every time. JPGs open and work fine. I have extensively searched on the internet for solutions and have tried everything such as: disk checking, deframgenting, playing around with photoshop preferences, deleting temp files, resetting preferences, clearing disk space. I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free.
View 8 Replies View RelatedVS X4 Ultimate still has a very annoying bug that I noticed already in VS X3.
Here it is.
I have a very simple project: 1 AVCHD clip (1920x1080, 25fps, interlaced), preceded by a simple title on black background and followed by another title on black background. The clip and the 2 titles are connected by transitions (standard transition provided by VSX4). No effects are used. The audio of the clip is muted and a WAV file is placed in an audio track. I rendered into AVCHD interlaced 1920x1080 (the standard template from Corel) and I can see a place-holder of the final file in Windows Explorer: the file has size 0KB because the VSX4 is currently editing it. At the end of the rendering, the file disappear! NO file is created and VSX4 gives NO error message. Notice that the same behavior did not happen with another video clip, same characteristic (I just used the same project and replaced the video clip). The other video clip is taken from the same camera, with no different setting, and imported to the PC at the same time. Also, on the PC there is enough space to store the rendered file.
This is the part that mostly piss me off: I can accept that could exist some issue with the video clip, or the chosen transition, or whatever else... but what I can't really digest is that if anything goes wrong, the SW creates no file without reporting any error message, like if everything were ok.
source video
1080i(tv capped) format:ts 25 fps no audio
output optinos:
MPEG Transport-Stream Files
24 bits, 1920 x 1080, 25 fps
Frame-based
(HDMV-PAL), 16:9
H.264 Video
Video data rate: Variable (Max. 9900 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
i tried many times , sometimes the render was comple without warning or error , sometimes the render process was failed by the message "File format mismatch" . but there`s no output video in my computer in either way
Using Revit to create simple masses, while I am signed in, I run the energy analysis and keep getting this message - image attached
When I create the same mass in Vasari and run the energy analysis - I do not get this error, the report works.
I have a fully completed drawing that is in 'architectural' (inches) and I would like to be able to change all of the 'feet & inches' linear dimensions (which form part of the drawing when the layer is turned on) to solely 'mm' instead.
The UNITS command keeps coming to mind, but I know that's not how to go about it. I've Googled for like 45 mins and read some highly overcomplicated instructions that lost me.
(note I am posting this in the beginners section )
simplified way to change this either via a command or changing settings via the toolbar?
When I export in LR4 I get the following message. However the export appears to have completed correctly.
View 2 Replies View RelatedI am creating web banners to put on eg. Google where the banners must stop animate after X seconds.
Now.
After the animation looping ends (after eg. 2 loops) I need the banner to jump to a "end message", eg. Book today! - how can I do that?
I am having “Out of RAM” issues with operation CS6 can handle with no problems.Memory allocations (access) seem to be a problem. CC and CS6 preferences are set the same. I have 9GB of RAM on a 64-bit Windows system, and the RAM allocation is set to 85%. Sometimes a file from the RAW converter will not open.
View 15 Replies View RelatedI have literally HUNDREDS of pictures that I want to put up. (There are a *LOT* more than what's up there now) I have to perform the exact same basic operation on all of them and I'm getting repetetive stress disorder.
The pictures are all extremely high quality so I obviously need to reduce it before I put it up. I take each picture file, reduce the width to 600, height to 450. Go to blending options, add a small bevel/emboss then save it as a medium-high quality jpg in a new directory with the same filename. (keeping the original high quality pic obviously) I then resize it to 200 pixels wide and save is as the same filename plus _t at the end to create the thumbnail picture.
Extremely basic stuff, but I have to do it over and over and over. Is there *any* possible way using photoshop and/or any other program or any combination of programs so I can automate it?
edit: On a side note I'm planning to re-do the entire site in php now that I've got a real host. (*note* the dns hasn't propogated yet thus the strange url) I want to make it so people can submit comments to all the pictures.
"OPR" has been set up to help people recover damaged photographs from the effects of Hurricane Katrina. If you check out the Operation Photo Rescue Blog that will give you all the information you need. I found the details of how to offer help on Week 5. They ask for various levels of competence in photo restoration and ask you to repair some sample photos so they can assess what level of damaged photos you may be able to fix.
View 3 Replies View RelatedToday, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
[URL] Bug is where the Hand move (by holding down Space bar and dragging) stops working. Issue appears to be a conflict with web browsers.
This bug is still present in Photoshop version 12.1 (CS 5). I don't use Firefox, I use Safari and Chrome. Quitting Safari did not fix the problem. Quitting Chrome DID fix the problem.
What is the difference between Adobe RGB(1998) working space, and CIE Lab space?
View 3 Replies View RelatedI just bought Photoshop CS5 and I have a problem with HDR pro . when I am trying to mount 3 images together it act in a strange way ( the images appear and disappear many times) then when the window with the result appear and I say ok it open up in photoshop as a single image ( in the layers there is just 1 photo) and when I am trying to work it up with the Plug in/filter HDR Effex Pro (Nik softwear) a pop up window appear saying that the file is missing and the operation it is not possible.
View 1 Replies View RelatedI'm having trouble using the Save For Web function on Photoshop CS6. The initial dialog opens fine and I can select any file type to save to etc. Once I click 'Save...' I get the error "Could not complete this operation. An unknown operating system error has occurred."I have looked up this error and from previous threads I have tried deleting the Save for Web library files and restarting, however this doesn't work (Unless I am deleting the wrong file?).
I'm running a 2.6 GHz Retina Macbook Pro with the latest update installed for Photoshop. I have 16 GB ram.Strangely, I have a PC running the same version of Photoshop CS6 and it works fine for this function.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Mac OS 10.8.2
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2600 MHz
[code]...
having problems with our new Minolta Pro? Using CS and when accessing the TWAIN for the scanner--it is still giving us errors pertaining to the SCSI ID (error #4 cannot locate SCSI ID or # ) We switched out the SCSI card for a Firewire?? How do we fool photoshop CS and XP Pro >> into thinking the firewire is the access to the Minolta?? Code:
View 2 Replies View RelatedI was making a web layout in Photoshop to use in Dreamweaver. (It is really just for a test to see how dreamweaver works...) Well, I had everything in the web layout sliced up correctly and when I tried to "save for web" it gave me this message...
''Could not complete this operation because an assertion has failed''
I have at least 3 photos that seem to be forever stuck in edit mode as a result of the problem. It has happened with versions 10, 11 and 12 now.
View 1 Replies View RelatedIs it possible to downsize a folder full of 5MB photos all in 1 operation? If so, which version of photoshop will do it?
View 8 Replies View RelatedAfter installing Photoshop CS6 I am unable to scan from within photoshop. I went to the Epson website and followed the instructions given but still no scanner shows up in the File > Import command. I am also unable to complete the crop and straighten photos command from the File > Automate menu, I get a dialog box that states "A required operation is unavailable." I have used this feature for many years and it has saved me many hours of scanning, I need this to work.
View 1 Replies View RelatedHow can I print several pictures on separates pages in one operation? Now I have to do them one at a time!
View 1 Replies View RelatedI am using Adobe Photoshop Extended CS6. I have created a chart and add a timeline ( more than 400). When i am saving the gif animated file using Save for Web, I am getting am error. The error is : " The optimized image could not be generated, likely because it is too big and there is no sufficient memory. The image will not be displayed."
Also, I am not able to save the .jpg file. Is giving me the error : " Could not complete the operation. An unknown error has occurred."