I have many of the KPT plugins and was working with them until recently when they all stopped working. Did Adobe come out with an update that rendered them useless? I get the error message "Could not complete the KPT FraxFlame II because the program could not be found." This message appears on all the KPT filters.
I was using the 32 bit version of Photoshop on a Win7-64 machine.
When i use the FraxFlame 2 filter of KPT 7 (very heavy filter) in Photoshop 7 (also tried in version CS and 6 at work, didn't work) in a small image size, it works fine. When i try it on a big A4 image (300 DPI), the computer starts working, and after a long time, the layer i applied the filter on is unchanged. Strangely enough the use of the filter is in my history panel.
My comp is a WindowsXP with P4 1,7 Ghz and 512 MB RAM.
I have tried installing adobe photoshop cs4 and It successfully installed, BUT after I successfully typed the seiral number I was in he stage where I had to accept a licence and when I tried to do this it just stopped and do nothing. I have tried it a many times without any satisfactional results...I can uninstall any adobe application through add or remove programs and creative suite uninstaller.
There are like 30 adobe applications on add or remove program list and I cannot remove any...
following adobe applications are:
Anchor Service CS4
Adobe bridge CS4
Adobe Cmaps cs4
adobe color - photoshop specific cs4
adobe color eu extra settings
adobe color ja extra settings
adobe color na recommended settings cs4
adobe color video profiles
[code]....
i have already made a few changes to an image but when i try to Distort>Wave then click ok it comes up with that message.
View 3 Replies View RelatedI'm trying to download the trial version of Photoshop cc. When the 50% mark is reached when downloading, a window requests that I close bridge...bridge isn't open. How do I complete download?
View 2 Replies View RelatedI am running CS3 and for some reason, I get this error on many of the filter options. To reproduce: - load any picture - it does not matter what format I use- create a new layer by selecting the new layer icon at the bottom of the layers pallet-
with the new layer selected, going to the menu item filter/blur/Gaussian Blur I have reset the preferences by pressing ctrl/alt/shift while bringing up Photoshop. I also have reinstalled (repaired) Photoshop. I've tried many different pictures with several formats (raw, .psd, .jpg) with no luck. Interestingly enough, the filter Lens Blur does come up with the screen.
I just installed CS3
I was sent a .psd-file (actually 3) which were created in Photoshop CS3 but I can not open any of them, because PS tell me
"Could not complete your request because it is not a valid Photoshop document."
Also, I was sent a lot of .psd-files during the last years and I have most of them in my email-account. Unfortunately, I can't even open any of them either!! And these were .psd-files PRE CS3 and worked just fine in CS2 ...
I tried everything:
- Drag & Drop from Windows Explorer into Photoshop
- "Open as"
>> Nothing seems to work...
I use Photoshop CS4 now and I have a problem when I want to import (by dragging'n dropping, importing, open - I tried every way)a .png or i.e. also an .jpg:
when I worked a short time with PS (i.e. 10 minutes) and want to open a .png then, there comes the popup-window with: "Could not complete your request because the file-format module cannot parse the file"
The funny thing is: my file is NOT broken!! Because if I then shutdown PS and open it again, there is no longer a problem to open the .png-file.... after a while of course it comes back...
I am using Photoshop CS3 on Windows XP Pro (Upgraded from PS v7.0 a few months ago) on about 10% of my images I'm getting an the error: "could not complete your request because of a program error"
when trying to save the file after doing changes to it. Oddly enough I do NOT get the error when doing "Save As" even after the recieving the error on a save. Nor do I get the error if I open one of the affected files in PS v7.
I believe from searching on line that the problem is "something to do" with the format of the metadata in the images. I am not sure exactly what, nor am I sure why it only affects about 10% of my images - all of which have been processed, captioned and keyworded the same way. However it is noticable that I cannot open "File info" dialog box in PS CS3 for any image that won't save. The error given is: "Could not complete the File Info command because of a problem with the File Info module".
Using CS6 Photoshop extended on iMac early 2008 model.....
Processor 2.8 GHz Intel Core 2 Duo
Memory 4 GB 800 MHz DDR2 SDRAM
Graphics ATI Radeon HD 2600 Pro 256 MB
Software Mac OS X Lion 10.7.4 (11E53)
I get this message when I try to open a .mov file...
"Could not complete your request because DynamicLink is not available?"
A customer of mine has a problem when he tries to open a pdf document in photoshop. This document is only 50MB large, but Photoshop displays the message "could not complete your request, not enough memory (ram)" when he tries to open this.
It is a windows 7 x64 system with 6GB of RAM. When the file is being opened, in process explorer you can see that photoshop is using more and more RAM untill it reaches the point of just above 2GB. Then photoshop displays this message.The system still has 30% free RAM memory left, but adobe won't use this memory.
I'm running Win 7, 32-bit and just picked up LR 4.1 and CS6. I've updated everything to the latest versions. I'm shooting with a Nikon D800.
I'm trying to merge 7 pictures using Merge to HDR Pro. I've tried this using raw files (NEF) and converted JPG files. I select the 7 files, PS comes up with the first picture showing. It starts to process the second picture and the filename changes to something like Untitled_HDR1. After a few seconds, that picture goes away and nothing else happens.
Here is my System Info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32Operating System: Windows 7 32-bitVersion: 6.1 Service Pack 1System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreadingPhysical processor count: 4Logical processor count: 8Processor speed: 2664 MHzBuilt-in memory: 3582 MBFree memory: 1542 MBMemory available to Photoshop: 1665 MBMemory used by Photoshop: 85 %Image tile size: 128KImage cache levels: 4OpenGL Drawing: Enabled.OpenGL Drawing Mode: AdvancedOpenGL Allow Normal Mode: True.OpenGL Allow Advanced Mode: True.OpenGL Allow Old GPUs: Not Detected.Video Card Vendor: NVIDIA CorporationVideo Card Renderer: GeForce GTS 250/PCIe/SSE2Display: 1Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920 Video Card Number: 1Video Card: NVIDIA GeForce GTS 250OpenCL UnavailableDriver Version: 8.17.12.9573Driver Date: 20120209000000.000000-000Video Card Driver: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dllVideo Mode: 1920 x 1080 x 4294967296 colorsVideo Card Caption: NVIDIA GeForce GTS 250Video Card Memory: 1024 MBVideo Rect Texture Size: 8192Serial number: [removed by admin]Application folder: C:Program FilesAdobeAdobe Photoshop CS6Temporary file path:
[code]....
I spent about 45 minutes with tech support to no avail. It has been confirmed through tech support that my MacBook Air does meet all system requirements for PS CC and to use the 3d features. However, I can't. I get a few error messages. One is "Could not complete the new 3d extrusion because there is not enough memory (RAM) - but they (Adobe support) confirmed there is enough memory. Another error message I get is "your startup disk is full". Basically a lot of the 3d features are not available. I've searched the forum and didn't see anything. After 45 minutes with tech support they said this is a "common" problem with MacBook Air users and Mac Pro users.
View 1 Replies View RelatedI have recently upgraded from CS4 to CS6. After editing a jpeg, I try the Save As command and recieve this message...."could not complete the Save As command because there is not enough memory RAM" I also notice that all my images are at 72 dpi, is this going to affect image quality? I shoot in the largest file possible when taking the photographs.
View 11 Replies View RelatedI am always getting the message ' could not complete due to program error" Why does this happen
View 1 Replies View RelatedI am trying to open a video to edit in CS6 and I get this error: Could not complete your request because DynamicLink is not available..I read on one of these forums that I should uninstall and reinstall the program.
I tried to uninstall the program and it told me to use the Adobe Application Manager.Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. " Token Number: 40-87772-063201122012...I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following: #Restart the computer and try the installation again.
"Cannot complete the reduce noise command in cs2 due to program error." Have uninstalled and reinstalled photoshop but same message appears when I click filter>noise>reduce noise. Same thing happens in filter>sharpen>smart sharpen. These 2 filters used to be working.
View 2 Replies View RelatedI'm using Windows XP and PhotoShop 8.0. I've been working on a drawing all day, and I've opened it up numerous times over the last few days. I've edited it in Paint Shop Pro as well, and haven't had any trouble with it until now. Out of nowhere I got that 'file not compatible' error and I have no idea what to do. I've tried opening it in GIMP (won't open), PSP (won't open), and ImageReady.. which opens it, but all the layers except the bottom one are blank, and the bottom one's colors are wrong and it only seems to show the top half of the image.
Is there any other way I could open and save this picture? I don't have any more programs that might be able to open it, but if someone else could or something, I'd greatly appreciate it. Thank you.
I receive this ERROR when I try to open in Photoshop CS2 different files from the same project.
The file size is about ±52MB, with several layers and SmartObjects.
What makes me insane is that I am able to open it on ImageReady CS2 and Illustrator CS2 but not in PS CS2.
I already try to open it in Windows Safe Mode but no success.
This is vital file for my work. Does anyone knows a solution for it?
I cannot save or go into blending options~
Is there something I can do to not lose all the progress of made of getting that far?
how to save a history in photoshop so that once you close it, you can reopen it and still have the history...for say using the history brush? I know how to make an external log,
View 1 Replies View RelatedI started to get the message "Could not complete your request because of a program error" a little while back, but it would go away after restarting photoshop, so I wasn't too worried about it. But now I've encountered this one file that won't let me do anything to it. As soon as I open it it pops up with the error message. No amount of clicking makes it go away, and I have to force quit photoshop. Always the same thing. I haven't found anything that works (I tried the file info>copyright idea and deleting Photoshop's preferences, even getting rid of extra fonts, and clearing the library>cache.)
More info:
It's a psd file. There are only 2 layers on the files, one is a vector smart image.
I opened the file and was able to edit it fine on a friend's computer, no error messages whatsoever - so it's not a corrupt file. (But that doesn't solve my computer's dilemma.)
I am having trouble with completing value scale gradations. I do not have a problem using the Gradient Too. My problem begins when I attempt to pick up the color with the Eye Dropper Tool and then apply it using the Bucket Tool. The H slidder remains at the correct number. The S and B sliders do not move so gradation does not occur. I keep getting a "Could not complete your request because of a program error."
View 1 Replies View RelatedI am trying to open a video to edit in CS6 and I get this error: Could not complete your request because DynamicLink is not available
I read on one of these formus that I should uninstall and reinstall the program.
I tried to uninstall the program and it told me to use the Adobe Application Manager.
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
I am on PS CS6 version 13.0.06 x64. Running on Mac OS X version 10.9. Installed the new Maverick on November 10 and not sure if that has anything to do with this.
In PS I get the error above when I go to File/Open and look for a photo file to pull. Before I even get a chance to chose a file the error pops up and does not let me go any further.
Also if I am in LR5 and send a photo to PS through Photo/Edit in/Edit in Photoshop CS6 it will open it. However, when I go to save as JPEG the folders just disappear and brings back the photo and does not allow me save.
Photoshop CS6 version 13.0 v64
On Mac OS 10.8.5
Error Message: Could not complete your request because of a program error.My CS6 photoshop was working before I upgraded my operating system to OS 10.8.5. I uninstalled photoshop and reinstalled it. Still doesn't work. I can't do anything in Photoshop, it comes up with that error every time I try to open a file.
With Bridge CC open, I select Browse in Mini Bridge and receive the following: "Cannot complete the command because the extension could not be loaded"
Photoshop CS6 works fine, but this is with Photoshop CC.
While using the Lasso tool often (10% of the time) it will complete the selection pre-maturely, with a single left click. Similarly and about the same frequency it wont start a path at all and I will need to click again to begin the selection. This has been happening for 5months since I upgraded to Creative Clous and Photoshop CC. Im running a more than capable machine.
Is there any known resolution for this?
I have CS5 and am playing around with CS6. So far so good, impressed overall.
I like to have Bridge set up to display the Metadata for each image, and when I view the metadata, it is not as complete as what I see in the CS5 version of Bridge.
Specifically, I like to be able to see the Subject Distance, which is recorded for the camera/lens combination I'm using. In Bridge CS5, the Subject Distance displays just fine, but it is completely absent in CS6.
Also, I like to see the ISO as well. In Bridge CS5, it shows nicely as "ISO Speed Ratings" while in Bridge CS6, it shows as "(ISO) Photographic Sensitivity" - kind of excessive.
To verify this, I made sure *all* metadata options were chosen to display, but Subject Distance is not showing up anywhere, and the ISO is a bit wordy.
How to get it to display Subject Distance, which is contained in the metadata.
cs 5.5 - launch program get (could not complete your request)? how to fix this?
View 2 Replies View RelatedWhen I updated Photoshop CS6 with the 1st update, I began to get a error message "Could not complete due to a program error". I also lost the ability to perform photomerges. Everytime I do a photomerge, I get an error message that says that "the functionality does not exist in this program". I use the photomerge frequently.
View 1 Replies View Related