Is it possible to map '[' and ']' to the wheel on a mouse? I think that it would be much easier to control brush size like this than using those keys. If not, I'll just try to find adjacent keys on the left size of the keyboard to do that.
View 6 RepliesI just bought a pressure sensitve tablet (wacom intuos5 medium).
I want to set it up so I can practice "charcoal drawing" in photoshop without the mess. Specifically, I want the pressure to control the darkness of the brush tool, from very faint to completely black.
So, in the brushes window, I enabled "other dynamics" and set the flow control to pen pressure. It works but not very well. It's hard to draw a faint line, and faint lines appear to be made up of discrete circles.
I also try linking the opacity to the pen pressure, and set flow to 100%. This work better for faint lines, but I'm unable to draw a completely black line. It seems the opacity maxed out at about 40%. I don't want to apply too much pressure lest I break the tablet.
I have a video that is 2:20-long, so it is a bit longer than a DVD/DL (8.5GB) at full HQ. But, when I let X6 "make it fit", it seems to reduce it by almost 50%, making the DVD folders only 5.1GB. This really ruins the quality.
Is there any way I can either control the reduction or tell it to leave the output alone when writing to hard-drive/DVD folders. I can then use a different DVD/video processing program that is smart enough to control the reduction just enough to comfortably fit/fill a DVD/DL (I have such a program) and not use a 100/50/25% approach to compressing/reducing.
Problem: I need to be able to control the size of toolbars (ICON size) via the worspace.
More Details: There is a department in our company that has a very specific function they need to perform in our ACAD drawings.
I created ONE toolbar that has the commands they need and set this toolbar to be the only thing that is displayed in their workspace.
Since it is just one toolbar I thought it would be good for the tool bar to use the large icon setting. But I only need to it to change when when using this one workspace.Other workspaces need to use small icons.
Is there a way to control the icon sizes when switching between workspaces?
How do I control the width of a palette?
ps = New PaletteSet("MyPalette")
ps.Size = New System.Drawing.Size(164, 266)
ps.MinimumSize = New System.Drawing.Size(215, 150)
ps.TitleBarLocation = PaletteSetTitleBarLocation.Left
For some reason changing the Size and MinimumSize doesn't seem to have any impact.
Also..I've been basing a project on the width it allows me but on a lower resolution screen it loads cutting off the right hand segments of the controls.
I have an assembly drawing which requires a break in the drawing view due to its height. The drawing view scales accoring to the change in height (so it remains the same physical height on the drawing), however I need to be able to increase/decrease the height (or value) of the break linearly to the height of the assembly.
I had a look at the ilogic 'break sample' and tried to adapt it to my needs, however, i couldnt get it working. I am using Inventor 2012.
The brush size on my paint brush and clone stamp are not working properly.
View 1 Replies View RelatedAs I continue my learning of AutoCad on the PC after having been a Mac CAD (non-AutoCad) user for 15+ years, another question has cropped up. My boss wants the circular "heads" of the elevation and sectional callouts to be smaller on the finished drawings. How can I control (or override) the default size of these? Or do I need to override on a case by case basis? I've searched these and other forums and what I am getting a sense of is that AutoCad controls those sizes pretty tightly so they remain annotative and AutoCad sets them at the size it thinks they should be and changing that size is not a simple process.
View 2 Replies View RelatedI'm using A Mac OS 10.6.8, and Illustrator CS5. I do garment screen printing. In my designs I use a gradient, which needs to have the halftone dots controlled, and a certain size, to expose properly on my screens to then print. I can't seem to figure out how to adjust the frequency or LPI, and the angle so that they work. It still prints out as a seen on screen
View 12 Replies View RelatedThe brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
I have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).
View 4 Replies View RelatedControlling the “pickbox size” when working in the “block editor” mode,
I couldn’t know how to increase the size of the pickbox while working in “block editor” mode.
In the regular case, the pickbox size is controlled from the option dialogue box
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
the size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
I'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
View 4 Replies View RelatedHow do I get my brush size to be the sam size as the cursor. [URL]...
View 6 Replies View Relatedfor some reason when I change brush size by the pallette or the [ keys I only see the cross hairs with a dot in the middle. I've tried ctrl, alt shift to reinsate all settings but still do not see a visual representation of the brush size.
View 3 Replies View RelatedWhen I make the brush size for any tool bigger part of it will disappear. Only the small brush sizes are shown as complete circles.
This happens with all tools that use a brush size. If I make the brush bigger or zoom into the document only a small part of the brush size will be visible. This part of the brush is placed inside a square. The edge of this square cuts the cursor off at the bottom and right.
If I move something with the move tool and it's a bit fast, the same square size will pop up, dividing the object into squares.
The first one makes it impossible to work in Photoshop since I can't use big brushes (with either pencil, brush, erasor): I can not see the cursor when the brush is big or if the document is zoomed in. If the document size is 100% and the brush is big the same thing happens.
Working on a brand new workstation. XP 2002 SP3.
Intel Quad corre Q9550 @2.83 Ghz.
I.98 Ghz 2.98 GB RAM.
Graphics card NVIDIA Quadro FX 1700.
Extra hard drive 1 Tb.
When I use a brush for anything and I want to increase or decrease the size by using the bracket keys the brush will not increase as large as it did in CS3 and part of the circle disappears leaving a half circle at best. Is this due to some plug-ins that I have from NIK or FixerLabs?
View 9 Replies View RelatedHow do I make cursor size the same as paint brush size in CS6? It isn't and it makes selecting more difficult. Preferences>cursor does not seem to fix.
View 11 Replies View RelatedI'm using Photoshop CS5 with a Wacom cintiq, and the brush size is stuck at 1 px, it won't change size no matter what -even if the brush size is set to 1000 px, the brush will paint a scraggly thin line...
I've changed brushes/ opacity/ flow/ pen pressure/ restarted photoshop/ restarted computer/ shut down, etc. It doesn't changeIt works just fine in the mixer brush tool, but not the regular brush tool..
I have my preferences set up for my cursor to show as brush size, but suddenly my brush shows up as a tiny dot no matter what size I change it to (I've gone all the way up to 5000 pixels with no effect when using the brush, healing brush, and clone tools). My image is 1402x996 pixels at 200ppi. I've tried zooming in with no effect. I'm probably missing something obvious, but I can't think what.
View 2 Replies View RelatedIn my system the liquify brush size goes from 1 to 151 to 301 to 454 and on up.
It it not possible to get smaller brushes like 30 60 100?
CS6 extended Win7 Graphic Accelerator on (this makes no difference in brush steps)
I was practicing using the Elements 10 Spot Healing Brush, and it was working fine. I closed out of Photoshop so I could go view some more tutorials. When I opened it again, I was unable to see the physical size of my brush..in Spot Healing or in Clone. It registered as a number in the upper bar, but I could not see the brush size as before. I had been using the brackets to raise and lower the size before I lost the ability to view the physical size.
View 2 Replies View RelatedWhen you select a certain size brush say 150 pixels and you paint it only paints a size of about 120 pixels. What adjustments are there so you paint exactly the same size as the brush indicator. I am running Photoshop CC on Mac OSX 10.6.8
View 3 Replies View RelatedWhen I expand the brush in paint, clone etc as it kets bigger about 75% of the circle edge disappears.
View 5 Replies View RelatedIn CS 3 suddenly i cant change the size of my brushes anymore. Well i can from very tiny -when you only see a cross- to about 45 pixels (with a default brush) when i use the slider it can show 2500 pixels but its still the 45 pixels from before. I dont understand, everything worked fine, i was working already abour 45 minutes without any problems, and suddely this happens....can anyone tell me what could be wrong or what to do about this?
View 8 Replies View Relatedmy cursor does not always represent the size of my selected brush, even though i have the option on in the settings dialog.
View 8 Replies View RelatedThe default hotkeys for increasing/decreasing the paintbrush size is [ and ] -
but these hotkeys do not work on my PC
Is there another way of changing the brushsize via hotkeys ?
I thought about actions but there is no menu command for brushsize-decrease/ increase.
when I changed the brush size and paint it looks bigger/smaller but the cursor itself stays the same width other times as the brush got bigger the circle got bigger now its not so its hard to see where the brush will end up. any idea how I can changed this back ? I already went to preferences and and saw that its in set right just not showing .
View 4 Replies View RelatedIn FILE > PREFERENCES > DISPLAYS & CURSORS >
The PAINTING CURSOR is set to BRUSH SIZE, and when I have the BRUSH selected, and press the ] key to enlarge the brush size on the fly (to ensure it's just not a small brush), it stays as what seems to be a PRECISE cursor.
Sure enough, when I apply the brush, the size is huge, but the cursor is not the size of the brush like I want. I even increased the HARDNESS value to 100%, and it acts the same way.
I'm using Photoshop CS on Leopard (Mac) with a standard Apple keyboard (QWERTZ, suisse-german). However I cannot use the Brush Size shortcuts [] or Shift+[]. I pressed every single key on my keyboard but I can't find the keys.
I guess the shortcuts are not working on Mac ?!