Whenever I go to file and new it pops up saying "Could not create a new document because the scratch disks are full" I have go into edit>preferences>plug ins and scratch disks and tried changing the settings to no avail. My first is startup and my second is C: I changed them around and it doesnt help. I tried a full uninstall and reinstall but it still says it !Any ideas what is wrong and how it can be fixed??
View 2 Replies
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
How to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies View RelatedI have a Macbook Pro running Lion, OS X 10.7 that I purchased two months ago so it's relatively new. Just bought Adobe Photoshop CS5 Extended and installed it on the computer a day ago. Software will not operate unless I hold option+command+shift when starting so that the preferences file is deleted.
I suspect that the problem stems from a plugin that I deposited into the plugins folder, because the software was working at first. I didn't piece this together until after the fact, but once I fired up the software a couple times after installing it, it worked fine each time. I noodled around and checked some things out to see what's new in CS5, then I went ahead and deposited a favorite plugin into the plugins folder. Things stopped working after this. Not positive the plugin is related, but thought I should mention it.
I removed the plugin of course, to no avail. I've uninstalled and reinstalled the software three times. No difference. When I open the software without deleting the prefs file, it's just buggy and non-responsive. Can't start a new project, and thing just end up crashing every time. The software is useless without deleting the prefs file when firing it up.
my photoshop cs6 will not start because preference file was somehow deleted.
View 1 Replies View RelatedI am having problems with my drawing template, I can make changes no problem, but when I use the template to start a new idw file the changes are not in place.
For example; view preferences, I want to work in third angle, I have this selected on the template but each time I start a new idw I have to change it from 1st angle.
e.g. 2; sheet size, I changed it from text to a drawing property, but it doesn't change when I edit the sheet size.
How can I log in a file the start and close event of Autocad?
View 1 Replies View RelatedI can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies View RelatedI got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies View RelatedI want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
View 3 Replies View RelatedI have an App developer that is requesting an .AI file for developing an App that can be utilized on all the following Apple hardware (iPhone 4, iPhone 5, iPod touch, iPad, iPad mini). He is insisting on it, because of the vector file. I have a design file that was completed in a layerd PSD. I want to know what, if any, quality is lost from converting from PSD to .AI vector file? Would it be better to have the Designers strach over from Scratch?
View 1 Replies View RelatedCan I place an empty .ipt file into an assembly then start working on it?
Or do I have to create the new part, save it, then go into my assembly and place it?
When I start a new document or open a file in Inventor, I get a pop up saying: "Cannot read texture image C:UseerspublicDocumentsAutodeskInventor 2011TexturesChrome.dds" I moved the whole Autodesk file and changed all paths under settings>files in Inventor. The new path to Chrome.dds is C:UsersKajDocumentsAutodeskInventor 2011TexturesChrome.dds
View 3 Replies View RelatedI just installed 3DS Max 2012 with a student license, but I encountered a problem that doesn't seem to go away. Whenever I open it, it gets to the "Starting 3DS Max 2012" screen and then freezes. The process freezes as well. Is there a way I can fix this? I have Windows 7 Ultimate, 32-Bit, and a Dual-Core Processor. My computer meets all the System Requirements except an insufficient video card.
View 4 Replies View RelatedI have a VB .NET Dll that add a new ribbon in AUTOCAD.When I load this dll from AUTOCAD, this new ribbon is well added.I'm trying to start this dll with AUTOCAD Start.
I've tried to load the DLL from the acad.lsp but the DLL is loaded before AUTOCAD load the ribbon, then the dll is well loaded but my new ribbon is not displayed !.
I have been searching for a macro to export the start and end point of a line coordinates to excel, but I can only find information on how to export 3D Points.
Is it possible to program a macro that allows me to export the start and end point of various lines in a sketch?
The objective of this is to connect an excel file which is updated when I create a line with it correspondent points, then i could not only import these x,y,z coordinates from excel to inventor but I whould be able to update my spreedsheet whenever I change my sketch.
I'm trying to start Excel and show the results of some BOM items I have written to a file like item number, part number and description.The task is to find components in an assembly that have a part number longer then 39 characters, due to ERP limitations.
What I´m doing is cycling through all BOM (structured) items on first level and check if the part number is longer then 39 characters.
I write these item number, part number, description to an Excel file (temp.xlsx), so the user sees which Components he has to check for the Part Number (make it shorter). I figured it would be best to do that with an excel file, so the user can save the results to a new file or just check it.
Values will be erased from the temporary excel file afterwards.Here I can't figure out how to start the excel application and open the file in an actual application window if possible.
how to list the results with plain iLogic that would do it too or some other solution to list a snapshot from the BOM.I guess there is no way to add your custom BOMViews ?
After running perfectly for months my CS5 will now not start from either the icons or the applications folder. I've done the following;
1. Uninstalled it.
2. Deleted all the relevant folders.
3. Run the clean up utility.
4. Rebooted the computer.
5, Reinstalled CS5.
6. Run the updater.
7. Restarted the computer.
Everything else (Bridge, RAW etc) works fine, and if I open the CS5 package and run the unix executable it fires up. The terminal window does say "No javatime present, requesting insatll", but I have the latest Java running on my machine. I'm running OSX on a 2012 imac i7. All software and drivers are upto date.
I get the message Photoshop.exe - System Error "The program can't start because QtCore4.dll is missing from your computer. Try reinstalling the program to fix this problem." I've tried reinstalling Photoshop CS6 but the problem remains, together with the message.
View 3 Replies View RelatedI am using Photoshop CS6 on my Win7 - 32b, and it used to work just fine, but recently for no apparent reason it just won't start. There is no error window, no freezing my computer, or anything else, it just won't start.
View 3 Replies View RelatedToday I updated Photomatix to 4.2 and right after I did that CS5 won't start. Before the update CS5 worked fine. Don't know if it's a coincidence or not. what I should try before uninstalling and reinstalling CS5?
View 11 Replies View RelatedPhotoshop CS5.1 will not start, missing this file. Is there a way to copy a good version from another location on the computer to fix this problem?
View 2 Replies View RelatedI just installed Photoshop CC, along with other CC software on Mac OS X 10.8.5. All the other software is working great, but Photoshop refuses to start and give me an error that says that the program will not initialize due to a program error (translated from the french message: "impossible d'initialiser photoshop en raison d'une erreur du programme")
I uninstalled Photoshop, remove an old after effect CS3 that was left (to be sure) and reinstalled Photoshop, but still the same message.I never installed Photoshop on this computer before, so I didn't do something wrong with its preferences.
I am running XP Pro with SP3 and all current patches. My dvd drive is a Plextor PX-760A. At first neither the CS4 application dvd nor the Learning dvd would start in my drive.
Then I flashed the drive firmware from 1.04 to 1.07.
This drive uses the windows drivers. Plextor does not supply drivers.
After flashing the firmware the CS4 Learning dvd starts fine. I also found my CS3 dvd and it also starts fine.
However, the CS4 application dvd will not spin up. The drive makes 2 faint beeps, tries to spin up the disk a few times and then gives up.
Any suggestions on what I might try before calling Adobe and asking for a replacement disk?
I dont know if this is related to my problem... but i installed about 1,500 fonts yesterday. And today i tried opening PS7 and i am getting the attached error. It displayes the splash screen and when it is done it displays the error. I tried using the direct file link, making a new image, opening an exsisting image. All does the same thing. Once i click okay it bombs out. Any ideas?
View 9 Replies View RelatedI've been running CS3 for quite awhile now, but was recently switched to a new domain on my network.
Photoshop CS3 will not open any documents now and instead gives me the error:
The application has failed to start because VersionCue.dll was not found.
VersionCue CS2 is running, which is bizzare because I've got the full CS3 suite.
I entered the serial, I got the green checkmark, clicked OK, then PS just randomly closes.
I try to open PS again, and some license agreement comes up, I click Accept, and that window closes, followed by PS NOT starting up. I even got the latest updates and all that. I've been google searching this crap for an hour.
Ive been using PS CS3 for a long while. All of a sudden it wont load. The logo comes on the screen and you can see it reading files. When it gets to reading preferences it stops and just hangs.
View 5 Replies View Relatedwhen i click to start it it only shows for about a second or two then dissapers.ill try to get a screen shot of it if I can time it right.
View 8 Replies View Relatedwhenever I run ps cs3 it loads everything but after its done it just closes the window, I even tryed running it as administrator and it just says it closed because a problem caused it to stop working correctly, I meet all the requirements to run it and just some
extra info:
Processors: AMD Phenom 9550 quad-processor 2.20ghz x4
Graphics Cards: Nvidia GeForce 9400 + Nvidia GeForce 8200
RAM: 5.225gb
OS: Windows Vista home edition (64 bit)
