I just updated my MAC OS 10.6.8 and have CS4version 11.02. I have an Epson pro stylus printer that prints from other software like MS Word and I Photo, but for some reason when I print from Photoshop it goes to the print cue and dsiapears a few seconds later. I have spoke to Epson and they think it is a preference in photoshop that did not agree with the lastest printer firmware update.
View 2 RepliesI have upgraded my iMac to Mountain Lion and now I cannot print from CS5 extended version 12.0 x 64. Any patch for this. As a Photography tutor, it is essential to have this working correctly.
View 4 Replies View RelatedYesterday I had to uninstall my cs6 and reinstall it to recognize new RAM I installed. Today in Photoshop the print settings work in the 32 bit version but do not work in the 64 bit version of Photoshop.
View 4 Replies View RelatedIn Photoshop CS6 under the view menu "print size" has been removed in version 13.0.4. Until 13.0.3 it was still there. Is there a good reason for it? Any known alternative? Workaround? I did use it a lot and miss it. On my main workstation I even went back to 13.0.3.
My guess is, that for "print size" showing the correct size on a given screen, the relevant screen resolution had to be set in preferences, and one had to know it, otherwise "print size" showed inproper size on screen. That might have led to remove it to not confuse retina screen users?
How do I print 11x14 photos on photoshop elements version 9
View 1 Replies View RelatedI have always been able to print (FIT TO PAGE) 8.5 X 11 (LETTER SIZE) PHOTOS in PREVIOUS VERSIONS OF PHOTOSHOP ELEMENTS! I recently downloaded version 10 and it will not print full page photos. How to achieve printing full size page photos with no white borders around the photo in version 10!
View 1 Replies View RelatedLR will not print to top tray v 3 and 5,tried two different printers. If i print a jpeg from the desktop no problem. This is a new problem that has not happened to me before.
View 1 Replies View RelatedI am working with a wiring diagram which is 8.5x11 normally. I'd like to enlarge the image to print on 4 pages each 8.5x11 that I can tape together so I end up with a large image that I should be able to read more easily.
View 4 Replies View RelatedI am trying to print a version of a letter head and footer on a A4 page. I sent the file directly from Illustrator CC to a desktop laser printer. On the screen looks all right but printed version has footer moved all the way up just under the header.
How to prevent the layout changes?
(BTW: My printer settings and Illustrator settings: Do Not Scale, Print Actual File Size)
Copied the printer configuration (pc3 and pmp) from AutoCAD 2013 to AutoCAD 2012. Plot the same drawing with that same printer configuration. With AutoCAD 2013, it plots out fine - page orientation landscape. In 2012, it plots out wrong. The orientation of the drawing is correct, but the paper is changed to portrait?
The plot setting are exactly the same in both versions.
I installed the retina display-optimized update to my purchased (non-Creative Cloud) version of Photoshop Design Standard (via the Adobe Updater app that pops up in my menu bar only when updates are available), but now when Photoshop launches, I get Photoshop Extended (and it's a trial version). Is this a known issue? Will I need to reinstall Photoshop?
View 2 Replies View RelatedHow can I install a recent version of Photoshop Elements and keep the albums set up in the older version?
View 1 Replies View RelatedI updated CS4 (student version) to CS5.5 commercial version. The brushes, patterns, shapes and styles I had installed in the CS4 Photoshop version were not loaded into the new version. I no longer have the original files of these assets (or customizations).
How can I load these in the updated version?
After the installation of Photoshop Elements 11 and Premiere Elements 11 on my new system, the catalogs of version 10 do not appear for the conversion to version 11; my 2 catalogs are installed on a LACIE-2BIG NAS system.
Elements Organizer 11.0.0.0
Version principale : 11.0 (20120830.r.32025)
I downloaded and paid for the upgrade version of CorelDraw X6 because I have X3,X4 and X5. I have installed it already but I went to reinstall on my desktop PC as I wiped my hard drive back to factory state, CorelDRAW no longer gives the upgrade option.
On start up it gives the following message ( see below ) as a 30 day trial.
I am unable open some part files and assebly files which are made in 2012 version. I have 2011 version.
View 2 Replies View Relatedhow to move a file in inventor from the 2014 version to last years version which was 2013 because my teacher's computer isn't reading my file.
View 5 Replies View RelatedI have recently upgraded to ver 2012 from ver 2000. I have numerous macros that were written for the older version that I need to utilize in ver 2012. I manually recreated them in the new version by typing in the commands from ver 2000. As I expected I am getting errors when I try to run these macros in Ver 2012. The mlayer command, for example, does not work. I am pretty sure I need to use the -layer command and have tried this but I still get errors. While I am relatively proficient in ver 2000 I am having some trouble finding commands in ver 2012 that match the old version. Below is an example of a macro from ver 2000 as well as my attempt to rewrite it in ver 2012.
^C^C(mlayer "notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
my rewrite:
^C^C(-layer;m;"notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
is there anyway of opening old files from previous edition of autocad on the newer version, have a file from a few years ago and it wont open now on the new one?
View 9 Replies View RelatedI have the 2013 AutoCAD Student Version and I want to transfer my file to the AutoCAD 30-Day Proffessional version, Can I do this by easily Copying and Pasting the drawing from version to version?
View 9 Replies View RelatedI recently upgraded to version 4.
Yesterday, I mistakenly opened up the version 3 icon and put in several hours worth of image work, metadata changes, and created a couple of collections.
1. What will be the easiest way for me to update the changes to my version 4 catalog without undoing work that I have done in that from the last couple of weeks?
i have one dwg in 2013 but i do'nt have cad 2013 so i want to open it in 2012
View 5 Replies View RelatedI cannot save my previous files created on a student version to an upgraded 2014 version. I tried changing the save as path in the options menu, but no luck. I am able to open the file in the upgraded version but it states that it will open as a student version. Also I cannot copy and paste anything from the student version to the upgraded one. Not sure why.
View 4 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Operating system, CS5 suite and printer drivers all updated.
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedI have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View RelatedUsing a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies View Related