Whenever I save a set of print settings for printing I can no longer access Print Settings again. This works but then the problem represents itself the next time I go to print. It is rather tedious to reset all my preferences every time I want to print a document.
Mac 10.6.8. I have the latest version of CS5 fully updated. Printing to an Epson 4800.
Photoshop CS5 v12.1.
Mac OS 10.6.
I'm printing to an Epson R1800 printer.
Print. Choose Color Management. Choose Document. Choose "Photoshop manages color". Choose the correct printer profile that matches the paper I'm using. Choose Relative Colorimetric.
THEN, I click Print Settings...under the 4th drop downu I choose "Print setting..." again. Under "Basic" "color" and "Color settings" are grayed out as are some of the "Media Type" options.
Is this normal? The problem is my black and white prints are printing really badly. They have color tones. I've cleaned the nozzles on my Epson printer, done everything the print utility suggests. All the test prints look fine.
I have created a shape, converted the layer to a 'smart object', and rendered 'lighting effects' to it. When I do that, PS creates a 'Lighting Effects' layer but the settings don't appear and how to access them. I am using CS6.
View 2 Replies View RelatedI'm working on some art on Adobe Photoshop CS6 Extended Trial and suddenly out of the blue, whenever I use the Brush Mixer tool, a message appears on screen saying that I can't use it because there isn't enough memory on the RAM. So I tried to enter Preferences on Photoshop to try and increase my memory usage however every time I do that, a message appears on screen saying "An Integer between 96 and 67 is required. Closest value inserted". Sometimes when I click "OK" on this box, it doesn't disappear and I'm forced to close Photoshop via Task Manager. Or sometimes the Preferences box box will open but when I try and click on the "Performances" tab within the Preferences box, the same Integer error message appears again and again and I can't click on the "performance" tab whatsoever.
View 9 Replies View RelatedIt seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be selected every single time.
I really can't remember if this bug was present in 4.0 or not (I'm currently running 4.1 RC), but I'm quite sure it was working OK under 3.x. Here's the thing.
I configure the printing settings and create. a profile: Profile1.I change all the settings and create a second profile: Profile2. The "Print Settings" settings are different, same printer, one for Color (Profile1), one for Advanced B&W (Profile2).I click on Profile1 (which was created with color Print Settings). Clicking on "Print Settings" or "Print", the printer settings selected under the epson driver is the ABW one (the one that belongs to Profile2).I reselect the correct setting from "Print Settings..." (Color).Click "Save" again.Righ-t click on Profile1 -> Update with current Settings. Setting seems to be saved.I then click on Profile2 and bam! The "Print Settings..." seems to be rverted to color instead of ABW.Update the correct settings, back to point #3
Can you reproduce this? This behavior is vanishig the power of the "Print One" button, unless you constantly print with tha same Driver settings.
---
Lightroom version: 4.1 RC [820174]
Version: 10.7 [3]
Application architecture: x64
Physical processor count: 4
Processor speed: 2,4 GHz
Built-in memory: 8192,0 MB
Real memory available to Lightroom: 8192,0 MB
Real memory used by Lightroom: 2388,3 MB (29,1%)
Virtual memory used by Lightroom: 4759,6 MB
Memory cache size: 866,7 MB
Displays: 1) 2560x1440, 2) 1680x1050
---
Epson R3000, latest OS X Epson Drivers.
We are attempting to access the file naming prefix in documents settings but i am unable to start code or find away to get where i need.
We have a multi solid bodie part that changes on via suppression to different styles of profile we then need the file naming prefix to chage depending on what key have selected .
ie Parameter = Style with 4 Multi selctions 1,2,3,4
depending on selection picked we then need to change the Solid Bodies Prefix in document settings..
Example :: If style = 1 then Solid Bodies Prefix = Dave
When I attempt to access "page setup" the button just changes color to blue as I click it. I cannot select the media. The printer works fine from Preview but not from CS5. Epson says it's a Photoshop problem.
View 6 Replies View RelatedWhen I add "Document Settings" to the quick acess toobar it causes Inventor to Crash when I close the active .ipt, idw, etc.
View 6 Replies View RelatedI have started to have probelms with the printing pictures using the CS6 Print Settings box.
After I have selected all the appropriate Printer setups and set the Print size to 8.5x11 both in Printer Setting and in the CS6Scaled Print Size box I get the below Print Preview.Both when I manually enter Scale,H&W and when I check the "Scale to fit Media Box".
It leaves the top and bottom with a 1/2" white border at top/bottom.
In order to get to the ABW printing mode, I need to have "Printer Manages Colors" selected for "Color Handeling". Then when I click on "Print Settings" I get the normal "Print" box that comes up where I have access to normal "Print Settings" options, one of which is "ABW" under "Print Mode".
And this has been working fine. Then all of a sudden today, when I enable "Printer Manages Colors" and I click "Print Settings" nothing happens. No new dialog box opens to the "Print" options as it usual does. Nothing pops up. If I switch color handling back to "Photoshop Manages Colors" and click on the "Print Settings" the box opens up as normal… but now of course the ABW option is greyed out.
I tried reinstalling the printer driver (Epson 3880)… but it's not related to the driver since it happens on multiple printers (HP & Epson). This is a problem within Photoshop. To make sure I'm not crazy, I tried it on another computer and it works as expected.
What could have caused this and how do I fix it?PS and OSX are on their current versions (12.0,.4 and 10.7.3 respectively)
I just added an Epson printer. When I'm in Photoshop (CS5) and click print>printsettings, to adjust the print size, nothing happens. The next window asking for print parameters never appears. I also have no "Page Setup" option under File.
View 1 Replies View RelatedCS5 and I can not change the print page size. I need the Common Updater? Where is that found?
View 7 Replies View RelatedI am using Photoshop CS5. When I go into print settings and change a setting and say OK, the setting is not being retained. When I go back into print settings, the settings I used a couple of weeks ago are displayed. Reseting defaults has no effect.if there is somewhere in Photoshop that I may have set a selection or a configuration that is keeping the most recent settings from being retained?
View 2 Replies View RelatedYesterday I had to uninstall my cs6 and reinstall it to recognize new RAM I installed. Today in Photoshop the print settings work in the 32 bit version but do not work in the 64 bit version of Photoshop.
View 4 Replies View RelatedA printer profile working perfectly in CS5 does even not appear in CS6. How do I fix this? (Windows 7 64 bit for CS5 and CS6).
View 10 Replies View RelatedI have an Epson 1400, and it was working fine this morning. I usually go to Print Settings to select my glossy paper. But just now, when I went to print, and tried to click the Print settings... button, nothing happens. I have tried using Software Update and installed the latest Epson Printer Software, and tested several other applications, and the printer is connected and working fine in those.
View 7 Replies View RelatedIs there a way to setup Photoshop CS6 print settings so that "Scale To Fit Media" is the default. I tried to create an action and then through Bridge select a folder and Batch send the files to Open-Print-Close. Since images are never received 8.5"x11" it would be convenient to have this as a default. Since the print settings revert, or aren't defaulting to "settings last used", my batch attempt was unsuccessful. I know I could edit my action to adjust image size to page dimensions, but thought a way to edit the Print settings default must be out there somewhere. (Using MacBook Pro OSX 10.8.4)
View 1 Replies View RelatedThe soft-proof of an image in CS6 gives a very good rendering based on a given paper profile for my printer. However subsequently, with proper settings in the Print Settings dialogue box, the image represented often has colors that are far from the earlier soft-proof rendering and are thoroughly inaccurate.
The image prints correctly, having no resemblance to the image appearing in the dialogue box, but coming quite close to the soft-proof simulation. Is something amiss? On a system running Mac OS 10.8.
Color Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal / vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
What color settings, profiles and configurations are suitable for print publications in Europe?How do I set my Photoshop CS5 (Windows) to print quality?
View 4 Replies View RelatedI was given a ctb file to use. I would like to print it out so I can see the pen settings. I can see them in the table in cad, but would like to print them
How I do this?
If you can print off plot settings etc, a list?
View 4 Replies View RelatedHow to get the print settings tab in lightroom? I have the page setup tab--but not the print settings tab.
View 4 Replies View RelatedI've looked through all the FAQs I can find, and I can see how to change the settings each time I print, but I'd like to make it so that it always prints the pictures several shades lighter. I also need to recalibrate the printer, but this has always been a problem. Is there a way to permanently set up a printing profile that will always automatically apply?
I'm using Lightroom 3.
In sheet set manager / publish / publish to PDF...
where does the program get the plot settings?
2013 Civil 3D
Can't print the illustration. The Color Management settings are inconsistent.
I keep getting this message everytime I try to use any of the print script examples in the adobe javascript reference guide. I also tried the script from this thread: [URL] .... and got the same error. I'm using a windows 8 machine but got the error on vista as well.
unable to select "printer manages colors" in the print settings, manage colors dialog. The options are grayed out and the default is "color sync". This started yesterday with LR4 so I upgraded to LR5 and it is the same.
View 2 Replies View RelatedIs there a way to control color print quality that matches the in-canvas look of a part or assembly.
As a quick example, I have a Kelly Green wire visible within an assembly. When I print the assembly within a .idw drawing file, the Kelly Green turns very dark.
Is it possible to specify a particular lighting setting to be used when printing? I'm expecting to see color print output that matches closely to what I see when viewing either a model or an assembly.
I'm using Inventor 2013.
In the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.
Just loaded 2013. Of course right away I get an error. "Internet access is required to access the Help" Well as you can see I have internet access.
View 4 Replies View RelatedIs there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies View Related