What color settings, profiles and configurations are suitable for print publications in Europe?How do I set my Photoshop CS5 (Windows) to print quality?
View 4 Replies
Photoshop CS5 v12.1.
Mac OS 10.6.
I'm printing to an Epson R1800 printer.
Print. Choose Color Management. Choose Document. Choose "Photoshop manages color". Choose the correct printer profile that matches the paper I'm using. Choose Relative Colorimetric.
THEN, I click Print Settings...under the 4th drop downu I choose "Print setting..." again. Under "Basic" "color" and "Color settings" are grayed out as are some of the "Media Type" options.
Is this normal? The problem is my black and white prints are printing really badly. They have color tones. I've cleaned the nozzles on my Epson printer, done everything the print utility suggests. All the test prints look fine.
First - I am not an expert in the Color settings/Profiles topic but I am thinking there is an issue here.
When I look at this image "McCroreyDigitalLogo.png" in Photoshop the 'whites' appear right.Then when I import it into ms PowerPoint, the whites look yellowish.
I have done a series of 'tests' and it seems to be that the color profile out of photoshop and the one in PowerPoint are not compatible.I have reset my Photoshop preferences with no luck/change to the results.
Finally, I did a screen shot out of photoshop and pasted that into Powerpoint. The white appeared correct. Basically any files I run through PS, when they are imported into PowerPoint, the whites turn yellow.
I keep getting the following error message:
"Your current color settings discard CMYK profiles in linked content but profiles were set to be honored when this document was created."
every time I open an Illustrator document. How this setting was set and how to turn it off. I am just using the standard N America Prepress color setting in Bridge.
I have tried opening new documents using the supplied Ai CS4 new document profiles, no luck. So I am assuming it's a pref that is set in the app itself, yet how to change this setting? I don't even see anything referring to a setting like this.
I found this archived discussion: [URL] .... which had no resolution.
How do I remove extra profiles from color mangement in Print Module?
View 2 Replies View RelatedThe soft-proof of an image in CS6 gives a very good rendering based on a given paper profile for my printer. However subsequently, with proper settings in the Print Settings dialogue box, the image represented often has colors that are far from the earlier soft-proof rendering and are thoroughly inaccurate.
The image prints correctly, having no resemblance to the image appearing in the dialogue box, but coming quite close to the soft-proof simulation. Is something amiss? On a system running Mac OS 10.8.
Color Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal / vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
I read the Photoshop Windows (read only) thread, titled "Scanning old photos", at [URL]......... I found Robert Shomler's answer useful, even though I am using an i Mac.
I have been using Epson Scan Version 3.01A and the Epson Perfection 4490 Photo scanner to scan reflective photos for over three years. I started using Adobe Creative Suite 6 Design Standard, and Photoshop for the first time, last month. My iMac is about one year old, and System Preferences shows its Display profile as i Mac.
I am befuddled by Epson Scan Version 3.01A's Color Configuration settings. I believe that I've been using the default Color Control, Continuous auto exposure setting for all these years, accept that I apparently changed Display Gamma from the default of 1.8 to 2.2.
I tested scanning the same originals with both the Color Control setting, and the ColorSync, Epson Standard, Target sRGB setting, as TIFF's. The resulting TIFF's look radically different in color, when displayed with Preview and Photoshop. The images resulting from the ColorSync, Epson Standard, Target sRGB setting more closely resemble the originals, except they appear to be a little flat.
At the moment, I have the Photoshop color working space at sRGB IEC 61966 2.1. When I open one of the scans done at the Color Control setting, select Assign profile sRGB IEC 61966 2.1, and check "…convert document to working RGB", I don't see any change in the color. The color does not change to look like the scans done directly to sRGB IEC 61966 2.1. Is that right?
I notice there is also an option to Assign profile Epson Perfection4490 - reflective. When I try this, the color changes to something different from both of the aforementioned test results.
Is it possible to change the color of a line by changing the display configuration? If so, how?
View 3 Replies View RelatedCan't print the illustration. The Color Management settings are inconsistent.
I keep getting this message everytime I try to use any of the print script examples in the adobe javascript reference guide. I also tried the script from this thread: [URL] .... and got the same error. I'm using a windows 8 machine but got the error on vista as well.
Is there a way to control color print quality that matches the in-canvas look of a part or assembly.
As a quick example, I have a Kelly Green wire visible within an assembly. When I print the assembly within a .idw drawing file, the Kelly Green turns very dark.
Is it possible to specify a particular lighting setting to be used when printing? I'm expecting to see color print output that matches closely to what I see when viewing either a model or an assembly.
I'm using Inventor 2013.
In the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.
I have several ICC profiles installed in the Colorsync>Profiles folder. They are QTR ICC profles for B+W printing. CS5 sees these profiles when assining custom profle for soft profing and when choosing a profile for printing.
CS6 finds the profles in the pulldown window only when soft profing. They are missing from the list of profiles in the printing menu. If CS5 can find them why not CS6. Are hey in a diferent location?
Noticed that after the last update many profile settings like snap aperatures, OSNAPS, and data shortcut working files aren't being remembered? It has only happened to a couple people, but they are having the exact same issues.
I wish it was simple as the shortcut being reset or pathed to the wrong profile, but it's not the case.
I wish to check my understanding of embedded profiles. I will have to print out from a second machine that I will not have the ICC profile I am using installed.
You use Edit>Convert to Profile Edit>Color Settings is set to preserve profiles File>Save As is has the color management box checked with the correct profile.
When you open the file on a second machine you use Print with the following settings:Photoshop manages Color Printer Profile - If the profile is not installed on that machine will the original people appear?Disable Printers color management.Will the image print out in correct profile? What about point 6.
I'm printing notecards on Moab Entrada 190 wt. bright white paper. I've calibrated the monitor with a Color Munki and downloaded the paper profiles for the Epson 220. When I first printed it came out dark. Then I decided to update the printer driver and print again...no change. Then I added an adjustment layer to brighten the image and print. Two problems came about: the colors all of a sudden had a lavender tint in the grays and the image was smaller.Then, I removed the adjustment layer and the size returned to normal, the darkened image returned and the color shift was gone. How can I get it to print what I see on the monitor, so that it isn't dark? Also, I printed the image in Windows Picture Viewer and it came out fine as I saw it on the monitor!
View 5 Replies View RelatedI cannot seem to see the custom Printer Profiles I have for certain papersin the Print Dialog.I have added the Print Profiles to Library > Application Support > Adobe > Color > Profiles (and also in Recommended)
But in the Print Dialog under Colour Management > Photoshop Handles Colour > Print Profile - they are not showing. I have done things like restarting Photoshop and converting the image to CMYK from RGB.
I can see the profiles in the Proofing menu and am able to select them.without using the profiles my colour management is completely off kilter.Also, can I confirm that I am putting the printer profiles in the correct folder?
Note that the Illustrator, Indesign and Acrobat print dialogues see all my (custom) printer profiles.
Even Photoshop sees them in the Apply Profile and Convert to Profile dialogues: just not when trying to print.
It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be selected every single time.
I really can't remember if this bug was present in 4.0 or not (I'm currently running 4.1 RC), but I'm quite sure it was working OK under 3.x. Here's the thing.
I configure the printing settings and create. a profile: Profile1.I change all the settings and create a second profile: Profile2. The "Print Settings" settings are different, same printer, one for Color (Profile1), one for Advanced B&W (Profile2).I click on Profile1 (which was created with color Print Settings). Clicking on "Print Settings" or "Print", the printer settings selected under the epson driver is the ABW one (the one that belongs to Profile2).I reselect the correct setting from "Print Settings..." (Color).Click "Save" again.Righ-t click on Profile1 -> Update with current Settings. Setting seems to be saved.I then click on Profile2 and bam! The "Print Settings..." seems to be rverted to color instead of ABW.Update the correct settings, back to point #3
Can you reproduce this? This behavior is vanishig the power of the "Print One" button, unless you constantly print with tha same Driver settings.
---
Lightroom version: 4.1 RC [820174]
Version: 10.7 [3]
Application architecture: x64
Physical processor count: 4
Processor speed: 2,4 GHz
Built-in memory: 8192,0 MB
Real memory available to Lightroom: 8192,0 MB
Real memory used by Lightroom: 2388,3 MB (29,1%)
Virtual memory used by Lightroom: 4759,6 MB
Memory cache size: 866,7 MB
Displays: 1) 2560x1440, 2) 1680x1050
---
Epson R3000, latest OS X Epson Drivers.
Where is color sync located (not color utility)? I am downloading an icc profile from Ilford paper and the instructions say to first download into downloads, then move to Library. This I did. But I cannot find Color Sync to move the profile into. When I did the "search" the list that turned up was not applicable. After that it needs to go to Profiles inorder that Lightroom 4 paper profiles list can receive it and be able to print according to the profile. How will I find Profiles? I have successfully downloaded profiles before.
View 3 Replies View RelatedI am trying to add new Epson ICC profiles to my lightroom4 print module. I downloaded them from Epson but I do not see them in my ICC list that exhists in the print module uner Other for color managment
View 2 Replies View RelatedI'm having some trouble with colour profiles in OSX. Basically i use a Mac laptop and Apple display. When i work in photoshop, and then save an image for web use, the colour profile difference means that the saved image looks quite a lot different to the photoshop version (this happens on both the laptop screen, and external display.
All i want is the colours in photoshop to display how they would look in my browser. So if i set a page background on a webpage to be #c5c1ba and then open up photoshop and start colouring with #c5c1ba, they look the same shade.
If I open a document using a color profile and I save it as a JPEG, will everyone else see the color profile?
View 8 Replies View RelatedWhen I save to web, I get a lot of color loss and my images fade.
View 9 Replies View Relatedwhen working in Photoshop to get accurate colors?
Also how can one change profile on the fly in Photoshop without having to convert?
I've tried saving images with sRGB color profile, Adobe RGB, and even NO color profile.
While each test has yielded various saturation levels (sRGB seems more saturated than Adobe RGB), the one single constant in all of them is that IE displays more (too?) colorful images than FF.
I understand that IE doesn't color manage while FF does, but that hardly explains the results I'm getting. If I don't color manage a document, shouldn't it display the same way in IE and FF? And how to explain that the sRGB profile documents are more saturated in IE than the Adobe RGB ones, if IE cannot read color profiles? And why does FF display *both* sRGB and Adobe RGB as less saturated than these same images in IE?
I've somehow managed to completely mess up my color profiles in Photoshop CS5. What a total Gormlops I am.
1 - ACR displays colours from RAW files as lifeless and dull compared to JPEG. I've searched countless forums and I'm lead to understand that RAW files don't include the 'in-camera' processing that we see on the JPEGS. What I don't understand is that ACR used to display the colors on my RAW files exactly like it did with JPEG files so although I understand the difference in the way ACR handles RAW vs JPEG why has this only become noticeable in the last few months? I've had this installation of CS5 for almost 2 years and the problem crept in only recently.
2 - Proof Colors Confusion
I mostly work on the web and rarely need to print. Round about the same time the above problem reared it's ugly head I also started having issues with how many graphics colours looked in CS5. I realized that half of the time I was working with 'Proof Colours' switched off which made my colours really intense (something to do with gamma).
I checked my 'Proof Setup' and switched it to Internet sRGB seeing as I mostly work with web graphics and photos. I then hit Ctrl+Y to switch on Proof Colours and now I see the colours as they really are.
My question for this is twofold - Am I correct to be working in sRGB and is there ar way to have 'Proof Colours' always switched on so that I only EVER see the 'actual' colours that others will see when I publish my files to the web?
These two issues arose at the same time and are linked. I tried installing a demo of CS6 in the hopes it would set me back to where I used to be but alas nothing changed.
How do you uninstall ICC color profiles?
I can install ICC color profiles by right clicking on the profile and selecting "Install" but there seems to be no way to uninstall a profile.
I was saving a picture into JPG format, and I made sure that i converted it to SRGP (that long name thing) but when I put it in dreamweaver, the color profile wasnt working, and the colors of the picture were dull. I was sure that it had an Adobe 1998 profile when I designed it, and I converted it at the end to sRGP IEC61966-2.1, and it still was dull. I used to be able to see color profiles in dreamweaver..
View 4 Replies View RelatedHaving a colour profile for your image file is great. It makes your image more colorful, however there is a problem and the problem is you can't get what you see on screen when you save it to another file and view it in another program.
Sometimes I have to printscreen the file in Photoshop WITH the color profile and paste it into a new document... I don't mind doing this for small images but when I'm designing a layout for a website and I like the colors the way it is, I want to save it as it is WITHOUT the color profile being embedded into my image.
Ok. I have a problem with colors not matching between Illustrator CS5 documents. I am often emailed documents with pantone colors selected in them. Later, sometimes I need to create another document using those same pantone colors. The problem is, these two documents print the pantone colors differently. In fact, on my screen the file colors look different side-by-side. I figured it was a color settings or color profile issue, so I went in and checked both files. Everything was the same (Working CMYK: U.S. Web Coated (SWOP) v2, Settings North America General Purpose 2, CMYK Preserve Numbers (Ignore Linked Profiles)) . When I paste pantone samples from one document into the other, they match what's in each other's documents, but the two documents themselves don't look the same and don't print the same.
What color setting could I be overlooking to cause this difference? I don't particularly care if they match on-screen, but it's the fact that they actually print different colors from the same pantone swatch that is the trouble. A blue pantone from one file will print purple from a different file.
