photoshop opens some jpg files 3 (i have a folder with 60 pics raw and jpg ) and it opens always via camera raw. I mean i want to open these 3 files like other jpg files , directly in photoshop.
View 8 RepliesUsing Bridge CS3 2.1.1.9 and JPEGs are opening with Camera RAW dialog.
Prefs are set to open with PS CS3.
My normal workflow consists of opening RAW files in ACR, making adjustments, then moving on to Photoshop where I apply retouching and build clipping paths. I then save the file as an 8bit TIFF. I rarely reopen these 8bit TIFFs again, but when I did so recently what I encountered was not what I expected.
My Photoshop (CS6) is opening 8bit TIFF files as Camera Raw when selected by "right click" followed by "Open with Photoshop CS6". I remember being able to open 8bit TIFF files directly in Photoshop, but I think this change has occurred since installing CS6.
Again, files in question began as 16bit Raw files, but were worked on in Photoshop CS6 (retouching) and saved with clipping paths. This would reduce them to 8bit files. When placed in page layout, clipping paths work properly, confirming that paths are intact.
When I want to open the files again - say from Bridge or a Finder window - by the method "right click - Open with Photoshop CS6", the file is opened first in Camera Raw, and then in Photoshop, and the path(s) is missing.I can open these TIFF files and access Paths but only if I locate and select the file from within Photoshop (File/ Open.../). The Open window gives "Format" as Camera Raw (which it isn't, having been saved as 8bit file). If I override format to "TIFF", the file opens with clipping path shown.
I have a Canon S100 which is one of the 6 new cameras added to LR. My existing LR would not open the CR2 file. This 3.6 RC opens it but does not list it as one of the canon cameras it profiles. How about the other 5 cameras? I don't have any of them so I can't comment. Only on the S100.
View 7 Replies View RelatedIn Lightroom 4.2 when open and I want to edit in PSE 10, I go to Photo, edit in PSE 10, and PSE 10 opens, but there is no image. I want to edit in PSE 10 and can't. Using LR 4.2, and attempting to edit in PSE 10, PSE 10 opens but no image opens to edit
View 1 Replies View RelatedCan't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
View 2 Replies View RelatedI am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
Have no choices in the camera calibration tab inside camera raw plugin. Use CS3 and Raw 4.6. Are choices only available in later version or PS? Also in Raw preferences choice for camera serial number and also setting as defaults. Where to enter serial number etc.
View 1 Replies View Relatedmy PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
View 2 Replies View RelatedI own a GoPro Hero 3 Black camera. I saw the Russell Brown demonstration of Camera RAW to correct lens distortion (
[URL].......
In this instruction, he takes images into Camera RAW and selects a tab called Profile, and it automatically detected the camera from metadata and made corrections.
I was sold, subscribed to Adobe Cloud, downloaded Photoshop and started following his tutorial. When I got to the lens correction part, my Camera RAW has no Profiles tab. Brown does say that you need the latest version, but I have assumed that since I just subscribed and downloaded, that I have that.
how can i create a camera profile with camera raw without x-rite or other third software?
i have a Colour Checker ,with different shade of gray and different colors
i remember about a script or something like that
i google a lot , but without luck
can i create my camera raw profile using a color checker with photoshop acr ?
i'm not sure but this should be the script [URL]....right? but i don't know how use it
is there a tutorial ? maybe a video to create a profile with camera raw.
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies View RelatedI don't know how to phrase it correctly but the 3d camera tracker inside of After Effects will only apply key frames to the null object. This causes the footage to rotate around itself.
View 4 Replies View RelatedI shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
I'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies View RelatedI am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies View RelatedI am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
View 2 Replies View RelatedI can open photoshop but it does not respond to anything, not even the Ctrl key. I have a new pheonix envy and windows 8. I have only used this photoshop program for one editing project. I have tried to reset the preferences with the keyboard shortcuts but nothing happens. I cannot quit the program or close the window. The program is completely frozen everytime I open it and all I can do it restart the computer. What could be causing this? It was working before I edited some photos....
View 2 Replies View RelatedWhen I try to open CS6 bridge, CS4 bridge opens instead. I'm running Windows 7. How do I fix this?
View 3 Replies View RelatedI have CS6 and CC on my system. CC opens fine when I open it with the Shortcut. But when I try to open a tif file on my desktop, the default program is CS6 and not CC. So I try "open with and CC is not listed. So I go to browse and find the Photoshop CC.exe icon under programs and choose it, I can't get it to show in the list. I want to make this my defalult program and it won't work.
View 4 Replies View RelatedJust installed Photoshop CC, for the first day it worked fine, now it opens and before I can open a file, it closes (crash) without any error message.
View 3 Replies View RelatedI just bought adobe creative suite 6 design and web premium package, I`m assuming photo shop cs6 is fully updated, I just installed it two weeks ago and I have not had any problems so far.
I have windows 7 on a hp laptop which is bran new. today I went to open up PS and it immediately says cs6 has stopped working then it shuts itself down.
When i try to open Adobe Photoshop CC it only opens in the taskbar and Im unable to open it completely as a whole. My only option for the taskbar is to close the window.
View 2 Replies View RelatedI recencly purchased a new Mac. Specs: OSX Version 10.7.4 and installed my copy of Photoshop CS4 onto the machine.
When ever I restart Photoshop it always automatically opens the last doc in the program from the previous work session. Is there anyway to stop this from happening?
Photoshop CS3 opens very slowly. Not the programm, i mean the files. When i make FILE -> NEW and make my setting and press OK it takes about 45 seconds to 1 minute to make the new file.
When the file is open, it works normal till i want to make the next file.
Photoshop CC Trial Crashes as soon as it opens on Mac osx 10.8.
View 12 Replies View RelatedI have tried to update everything is current.
I tried to open jpeg-gif-png and PSD nothing will open.
tried creating new file and the new box wont show.
I believe it is opening the jpeg preview stored with the DNG. Is this true or does Preview support DNG an RAW natively somehow? The particular image I opened, just to try it, looked brighter and more saturated than opening the same image in a converter.
View 2 Replies View RelatedWhen opening a file in CS6 the file opens at 0.4%. How can I set the view so that the file opes and fills the screen as the default viewing percentage.
View 3 Replies View RelatedJust installed PS CC.Program opens but is non-responsive.Windows 7.
View 1 Replies View Related