My studio has been using the Photoshop COM interop to do some automation which has worked really well for us, but just today I got this COM exception:
System.OutOfMemoryException: Retrieving the COM class factory for component with CLSID {99AEA70E-4D13-44BF-A878-33345CBFCBC8} failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).Â
Â
which was weird since I wasn't anywhere close to being OOM...my system has 32 GB and i still had 16+GB free and ~600 GB of space on my HDD.
Â
In any case, after that event, when I start Photoshop, the UI is active for maybe about 5 seconds before it becomes unresponsive and sits frozen for about 3 or 4 minutes before it goes 'magic-desktop'....crashes with no errors or dialogs.Â
Â
Any runtime logs that Photoshop CS6 generates where I can look for more info on what might be going on?
I'm having troubles using Photoshop CS6 (64-bit) on Windows 7 (x64). After deselecting the move tool, or any tool that has move capabilities, such as the various transform tools, Photoshop crashes to the desktop. Â I have reset all preferences by holding CTRL + ALT + SHIFT while starting Photoshop and by manually deleting the preferences files. I've also tried uninstalling and reinstalling Photoshop in its entirety. These attempts to solve the issue didn't change anything regarding the crashing. I am using the latest drivers for my graphics cards.
I have encountered a bug that when I copy text located at the desktop area. X6 (32/64bit) will crash. if I forget this bug during my work! I need to drag the contact back to the work sheet before I copy.
Recently installed CS6 web premium on my computer. PSD 3D functions crash program everytime. I am using an ATI Raedon 4650 card, driver version 8.730.0.0.
i've been noticing that the program has seemed to run slower than it was a few months ago - taking longer to load up, buttons being unresponsive for a few seconds, etc. recently i noticed if i'm saving my psd file as a jpeg it will 'hang' for several seconds with the "ok" button greyed out. after several seconds it will turn blue but when i click it, it acts unresponsive but after a few more seconds it saves the document. but there's no click animation or whatever you might call it.  some specs - intel core i3/ 3.06GHz/ 4MB/ ATI Radeon HD 4670
I open the software, optimize the database, hit the triangle button and click "find duplicates." This freezes the software each and every time. Â Virus caused me to wipe the hard drive and reinstall the software. The problem is the software has about 2 or 3 times the pictures it should it shows previous edits and two pictures and on top of that edited the pictures as it imported them so some pictures appear 3 times. I really need to get this taken care of. Using 64 bit Windows 7.
We have a customer using Photoshop CS6 he opens an image and performs the Quickstep process (the process where it scans the original image and rips out all of the different colours used to create the image) and then saves the image as both a PSD and EPS. If he then tries to open the newly saved PSD file the image hangs and gradually begins to open but then just locks up Photoshop to the point you have to end task to get out of it. If the EPS file is opened it opens absolutely fine. all other tasks and processes carried out in Photoshop are absolutely fine.
I'm running Photoshop CS6 x64 on a Lenovo T510 running Windows 7 x64. Â My Lenovo T510 laptop will automatically switch from Intel HD Graphics adapter (CS6 reports The Intel HD graphics card doesn't work with CS6's "Use Graphics Processor") when undocked to NVidia graphics adapter (CS6 reports as NVS 3100M/PCIe/SSE2) when docked. See [URL] Â Unfortunately, this means that undocking with CS6's default settings will hang Photoshop.exe with 100% of one CPU core. Photoshop recovers again after the PC is docked and the NVidia graphics adapter is enabled again. Â When I turn off CS6's hardware acceleration, the problem goes away. Â Updates says I have the latest Photoshop CS6 installed. Â It's brand-new install and I haven't changed any settings since installation. Â This seems like a bug in Photoshop: PS should be smart enough to realize that the graphics card has changed instead of hanging the CPU.
i had purchased 2 units of AutoCAD LT 2012 Commercial New SLM with Subscription in the Box**New last year. i had installed them in my desktop & laptop ( both windows xp 32bit ). i am facing problem while i doing the copy & paste option, my computer will hang & i need to restart the programme again.
I'm having a problem with my Adobe Illustrator CS6, whenever I click an image to select, i need to wait for loading until it's selected. Quite annoying everytime I need to select few elements on my artboard.
I've just instaled PSPP x3 on a new computer (i5-2500k / 8GB / Intel mainboard / ATi HD5450 with 512MB / Win 7 Pro - 64-bit), followed by the 4 patches.
When I start PSPP everything appears OK. I dragged an image into the program and worked on it.
When I came to save it (using the floppy disk icon or File / Save) PSPP immediately went into the 'Not Responding' state. When I restarted it, the same thing happens, but also with file open icon and File / Open as well. Editing functionality seems unimpaired.
I followed the 'complete uninstall' process; CDS 2010 Clean-Up ver1.8.exe, folder cleanup and registry cleanup. I turned off User Account Control, rebooted, disabled my anti-virus, and then reinstalled. Exactly the same as before.
Everytime i open Adobe Edge Animate, it takes a good minute or too to stop the spinning ball. Then after every mouse click, it spins for another couple of minutes, and so on. I have tried creating the launchd.conf file with the proxy information, I have uninstalled and installed numerous times. I am working from CC with a Mac Book Pro Retina, 15-inch, Early 2013 OSX 10.8.5. I am having no other issues with any of my other applications and them being responsive.
I have a large drawing with 5 meter contours that are 2D polylines on elevation. In Civil 3D 2012, when the crosshairs touch a polyline the drawing hangs for quite awhile. I've cut a piece out of the drawing so it is 28mb instead of 121mb and now the hang time is much less but it still does it. It does not happen in AutoCAD 2012.
Windows 7 x 64 Intel i7-4770 CPu @ 3.40 GHz 24 GB RAM NVIDIA Quadro K2000D Civil 3D 2014 (i.108.0.4, SP1)
I have a serious problem when hatching in AutoCAD LT 2011, it's making my PC hang but only when I'm using the 'Add: Pick points' command. It's so bad that I can't even call up the task manager to stop the process and I have to switch it off and on again to get it working.
I've never encountered this before with earlier versions of AutoCAD, is there a way around this? It's driving me nuts!
I'm using AutoCAD LT 2011 on Windows Vista.
Since opening my most recent backup file I think I may have found the cause.
I had inserted a .jpg image (150 x 150 @ 8KB) that I was using to trace around it and it was these tracings that I tried to hatch. I have since deleted the image and now the hatching causes no problems.
I waited months to update to 3.6 because I finally had Lightroom running well on my machine. Previously versions would hang on the spot healing brush to the pointed I'd have to shut down using task manager. The problem comes when I've edited a file in an external editor and I am working on the tif file that has been imported back into Lightroom. The spot healing brush just does not want to work. This continues to happen even when I close Lightroom and go back to the file later. This really bums me out because it just crushes my workflow! Â I have a new problem too. It could be I hit something somewhere to cause the following behaviour. When I am working on an image with the adjustment brush, the adjustment point disappears. It doesn't show up so if I want to change the brush parameters the point isn't there to click on an make active so I can adjust the parameters again. This just started since I upgraded to 3.6. I believe I was using 3.4 before and I never had this issue.
When I started to use the preview releases of AMD's Catalyst 11.10 drivers, PSP Photo X3 would hang every time on the splash screen with the "Initializing Command Manager..." text. I have to kill the "Corel Paint Shop Pro Photo.exe" process. I did a clean install of AMD Catalyst 11.9 drivers, and no problems again. At the time I though it a 11.10 preview behavior. Maybe something about being unsigned drivers (not WHQL/signed).
Well. Today 31oct2011 the AMD Catalyst 11.10 WHQL/signed drivers was released. No change, with 11.10 final X3 hangs on splash screen, back to 11.9 it works.
I know there might be other ways. Reinstall Windows, test out PSP X4, and probably more. But I'll run X3 on a virtual machine before I do a reinstall, would take me one week of work And from reading about X4, Corel have missed their target audience by a mile Why can't they understand that some of us, me at least, would pay full price for a major upgrade that did not give a single new feature. Just put all the work into tuning/bugfixing the ones already there. I'm serious about that angle.
Little more about my setup: » Win7 Ultimate 64bit (SP1, patched up) » AMD HD 6950 x2 (AMD Catalyst 11.10 WHQL drivers, with CAP 4) » Corel PSP Photo X3 13.2.1.32 (Patch 5)
When I try to access a hatch pattern from the Hatch Creation Ribbon Contextual Tab, C3D stops working and I have to force the program to quit. I've tried repairing the installation, which didn't work. I've also compeltely uninstalled and then reinstllaed the program, and have applied the Service Pack 1 update, but the problem persists.
However, accessing a hatch pattern after using the "Hatch" command from the command does seem to work.
technical problem with my Photoshop SC3, when I want to save my photo with the "save as" button, the programe hang and I have to reset it. I uninstall it and re-install the whole program but it keep on doing the same.
I don't like Lightroom, and when I tried the trial of CS6, I could not find a way to get rid of the big box that obscures the desktop. Is there a way to default back to the "classic CS5" look? Also, I prefer the previous version of Camera RAW.
I recently purchased Photoshop Elements 6, for my Macintosh OS X. Though I've looked everywhere on the menu, I can't find a way to keep my desktop in the background. The only way I can get a view of my desktop is if I keep switching back and forth to the help section of PSE 6. Any enlightenment on how to keep my desktop visible all time, while using the PSE 6,
I have PS CS5 on my laptop and desktop. I have Mac os x 10.6.4 on both computers. I have a new Lexmark s605 printer set up wireless that I use for general stuff and an Epson 2400 for photos.
I can print from all applications to the Lexmark from my desktop except Photoshop CS5. It goes to the print queue and shows "Printing page 1 of 1" but just hangs, never prints. I can print from PS CS5 from my desktop to my Epson 2400. I can print from PS CS5 (wireless) from my laptop with no problem.
I have uninstalled and reinstalled the printer and PS CS5 on my desktop, same result. All the firmware, systems and applications are up to date. I am using 64 bit which prints from the laptop. I tried 32 bit just for the heck of it from the desktop and it did not make a difference. I've tried Lexmark support and Adobe support without much luck.  Adobe says it is Lexmark, Lexmark says it is Adobe. Adobe says it does not support networked printers?Â
Very strange reactions from Photoshop CS6 when used on my Lenovo ThinkPad in an extended desktop situation. Any attempt to open an image in Photoshop is unsuccessful in showing the actual image, despite the layers box showing the thumbnail, the "open ifle" text box at the top indicating it is open, and the image details box also indicating correct data for the image file. If I close down extended desktop Photoshop works just fine. If I extend the desktop once Photoshop is running, I can move the open window to the extended desktop and it also works fine. Once I close Photoshop I am back to square one.
When I signed up for the Cloud, the desktop application manager for CC wasn't installed on my computer, so now, when I try to update or install something new (Photoshop CC for instance), I get a message to do it from my desktop. Since I don't have the Cloud application on my desktop, I can't do this!
I have CS5 on a MacBook Pro laptop and CS3 on a PC Win XP desktop that crashed. Will I be allowed to install CS3 on a new desktop? I will access the XP hard drive only to retrieve some scan files?
I have Photoshop CS3 on a PC running Windows Vista. When I try to batch or automate I cannot access any files other than the desktop. If I do file>automate>batch and then go to choose folder, the only folders I can access is the desktop. There are no plus signs and no other options except desktop. The same thing happens if I go file>scripts>image processor. Someone told me this could be a permissions problem with Vista.
I just made something in cs2 and put it as my desktop wallpaper, it was from a simple tutorial. I was just wondering how I could add some more color or how to jazz it up a little. Right now, it seems kind of plain.
I use Remote Desktop quite a bit to login to my computer and use programs installed on there. A frequent one is Adobe Photoshop. When I do my work in Remote Desktop everything works great, but when I'm actually at home on my pc it loads everything and the splash screen goes away and then all of a sudden it has "Photoshop CS4 has stopped working" error.
It turns out it is doing this with all of my adobe products. I am using Vista 32-Bit and all the products are CS4. One more thing I noticed is if I open Photoshop in remote desktop then login to my computer I can use it without error.
i recently fixed a virus on my computer after a few days hard work tracking it down, and since then i have experienced no blue screens anymore, but i had a probel with explorer.exe where it used sometimes over 800MB of memory doing nothing. With more research and monitoring, i discovered its cause was actually a corupt music file on my desktop, and every time i refreshed my desktop, explorer's memory usage would jump up a few dozen more kb of memory.
This is now fixed. BUT, i still have one symptom of something wrong, that doesnt seem to go. My PC is back to being fast it seems now, and there is no noticable real lag between just opening folders like there was, but my desktop still has problems. If i close a full screen program, the computer doesn't exactly slow down, its just the program closes very slightly slower than normal because it closes from top to bottom.
MSN in particular, always leves it's title bar behind when closed. And if i click and drag on my desktop, the little dashed box it makes sticks and doesn't go away. All of this is resolved by a refresh of the desktop, but it doesn't explain why it is happening. Windows XP 32bitNVidia 9800GTX GPU4GB RAM
