i had purchased 2 units of AutoCAD LT 2012 Commercial New SLM with Subscription in the Box**New last year. i had installed them in my desktop & laptop ( both windows xp 32bit ). i am facing problem while i doing the copy & paste option, my computer will hang & i need to restart the programme again.
View 5 Replies
a)How I can copy some drawing objects from source dwg to target dwg in the same dwg session by using c#.Also I have to take care of Coordinate system of target dwg.Is it possible that copied dwg objects automatically conveted to the target coordinate system?
b) How I can extract the coordinates system information of a AutoCAD map drawing and set the coordinate system of other dwg according to extracted information by using c# .Net.
AutoCAD 2007 ?
To copy some objects from a drawing and then you paste them in another drawing command 'Paste to original coordinates ', but this command line is not active (available in window of right click and then use the option 'Paste to Original Coordinates').
When I try to copy and pate any element within the same drawing it won´t paste it will say: "specify insertion point" and I´ve given up.
I tried PICKFIRST but it is set to 1, also tried checking if it would fit in my screen or if the zoom was messed up, but nothing works!
I recently made the switch at work from AutoCAD 2000 to 2012. Right now I’m working with a small drawing and the copy paste option is taking forever, I wasn’t sure if it was the drawing so I went to a previous large file and that takes even longer.
View 8 Replies View RelatedI've been using X6 for over a year without any major problems. I have all updates and hotfixes installed. Last night I saved a project I was working on and this morning when I went to open it it crashed immediately, before the splash screen even appeared. Everything froze including the mouse and keyboard and I had to do a hard shutdown. I booted back up, tried again and the same thing. Tried different .cdr files and opening CDX6 directly. Same complete system-wide crash. The F8 reset option freezes the system too.
I tried reinstalling the last update and as soon as the reinstall began it crashed. I tried uninstalling it. It crashed. Each time freezing the complete system, mouse, keyboard and all, requiring a hard shut down. I scanned for viruses—nothing.
Everything was working fine last night, all I did was boot down the PC for the night and boot it back up in the morning like I've done a million times.
I have a large drawing with 5 meter contours that are 2D polylines on elevation. In Civil 3D 2012, when the crosshairs touch a polyline the drawing hangs for quite awhile. I've cut a piece out of the drawing so it is 28mb instead of 121mb and now the hang time is much less but it still does it. It does not happen in AutoCAD 2012.
Windows 7 x 64
Intel i7-4770 CPu @ 3.40 GHz
24 GB RAM
NVIDIA Quadro K2000D
Civil 3D 2014 (i.108.0.4, SP1)
I have a serious problem when hatching in AutoCAD LT 2011, it's making my PC hang but only when I'm using the 'Add: Pick points' command. It's so bad that I can't even call up the task manager to stop the process and I have to switch it off and on again to get it working.
I've never encountered this before with earlier versions of AutoCAD, is there a way around this? It's driving me nuts!
I'm using AutoCAD LT 2011 on Windows Vista.
Since opening my most recent backup file I think I may have found the cause.
I had inserted a .jpg image (150 x 150 @ 8KB) that I was using to trace around it and it was these tracings that I tried to hatch. I have since deleted the image and now the hatching causes no problems.
When I try to access a hatch pattern from the Hatch Creation Ribbon Contextual Tab, C3D stops working and I have to force the program to quit. I've tried repairing the installation, which didn't work. I've also compeltely uninstalled and then reinstllaed the program, and have applied the Service Pack 1 update, but the problem persists.
However, accessing a hatch pattern after using the "Hatch" command from the command does seem to work.
Having a problem with Paste and Paste as Block in the right mouse click drop down window.
In the right Mouse click drop down window the Paste, Paste as Block and the Paste to Original Coordinates are grayed out.
The copy with Base Point works, as does the Ctrl+V and Ctrl+Shift+V and repeat Paste Block from the recent Input drop down selection. Why the paste commands are grayed out?
My studio has been using the Photoshop COM interop to do some automation which has worked really well for us, but just today I got this COM exception:
System.OutOfMemoryException: Retrieving the COM class factory for component with CLSID {99AEA70E-4D13-44BF-A878-33345CBFCBC8} failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).
which was weird since I wasn't anywhere close to being OOM...my system has 32 GB and i still had 16+GB free and ~600 GB of space on my HDD.
In any case, after that event, when I start Photoshop, the UI is active for maybe about 5 seconds before it becomes unresponsive and sits frozen for about 3 or 4 minutes before it goes 'magic-desktop'....crashes with no errors or dialogs.
Any runtime logs that Photoshop CS6 generates where I can look for more info on what might be going on?
Recently installed CS6 web premium on my computer. PSD 3D functions crash program everytime. I am using an ATI Raedon 4650 card, driver version 8.730.0.0.
View 4 Replies View Relatedi've been noticing that the program has seemed to run slower than it was a few months ago - taking longer to load up, buttons being unresponsive for a few seconds, etc. recently i noticed if i'm saving my psd file as a jpeg it will 'hang' for several seconds with the "ok" button greyed out. after several seconds it will turn blue but when i click it, it acts unresponsive but after a few more seconds it saves the document. but there's no click animation or whatever you might call it.
some specs - intel core i3/ 3.06GHz/ 4MB/ ATI Radeon HD 4670
I'm having a problem with my Adobe Illustrator CS6, whenever I click an image to select, i need to wait for loading until it's selected. Quite annoying everytime I need to select few elements on my artboard.
View 7 Replies View RelatedI open the software, optimize the database, hit the triangle button and click "find duplicates." This freezes the software each and every time.
Virus caused me to wipe the hard drive and reinstall the software. The problem is the software has about 2 or 3 times the pictures it should it shows previous edits and two pictures and on top of that edited the pictures as it imported them so some pictures appear 3 times. I really need to get this taken care of. Using 64 bit Windows 7.
We have a customer using Photoshop CS6 he opens an image and performs the Quickstep process (the process where it scans the original image and rips out all of the different colours used to create the image) and then saves the image as both a PSD and EPS. If he then tries to open the newly saved PSD file the image hangs and gradually begins to open but then just locks up Photoshop to the point you have to end task to get out of it. If the EPS file is opened it opens absolutely fine. all other tasks and processes carried out in Photoshop are absolutely fine.
View 1 Replies View RelatedI'm running Photoshop CS6 x64 on a Lenovo T510 running Windows 7 x64.
My Lenovo T510 laptop will automatically switch from Intel HD Graphics adapter (CS6 reports The Intel HD graphics card doesn't work with CS6's "Use Graphics Processor") when undocked to NVidia graphics adapter (CS6 reports as NVS 3100M/PCIe/SSE2) when docked. See [URL]
Unfortunately, this means that undocking with CS6's default settings will hang Photoshop.exe with 100% of one CPU core. Photoshop recovers again after the PC is docked and the NVidia graphics adapter is enabled again.
When I turn off CS6's hardware acceleration, the problem goes away.
Updates says I have the latest Photoshop CS6 installed.
It's brand-new install and I haven't changed any settings since installation.
This seems like a bug in Photoshop: PS should be smart enough to realize that the graphics card has changed instead of hanging the CPU.
I've just instaled PSPP x3 on a new computer (i5-2500k / 8GB / Intel mainboard / ATi HD5450 with 512MB / Win 7 Pro - 64-bit), followed by the 4 patches.
When I start PSPP everything appears OK. I dragged an image into the program and worked on it.
When I came to save it (using the floppy disk icon or File / Save) PSPP immediately went into the 'Not Responding' state. When I restarted it, the same thing happens, but also with file open icon and File / Open as well. Editing functionality seems unimpaired.
I followed the 'complete uninstall' process; CDS 2010 Clean-Up ver1.8.exe, folder cleanup and registry cleanup. I turned off User Account Control, rebooted, disabled my anti-virus, and then reinstalled. Exactly the same as before.
Everytime i open Adobe Edge Animate, it takes a good minute or too to stop the spinning ball. Then after every mouse click, it spins for another couple of minutes, and so on. I have tried creating the launchd.conf file with the proxy information, I have uninstalled and installed numerous times. I am working from CC with a Mac Book Pro Retina, 15-inch, Early 2013 OSX 10.8.5. I am having no other issues with any of my other applications and them being responsive.
View 7 Replies View RelatedI have had Window 7 64 bit operating system put on my computer.Will I get the benefits of additional Ram on Photoshop CS6 Extended?
View 1 Replies View RelatedWhat is the most efficient way to cut and paste a paragraph from Word and paste it as text in AutoCAD ?
View 9 Replies View RelatedI waited months to update to 3.6 because I finally had Lightroom running well on my machine. Previously versions would hang on the spot healing brush to the pointed I'd have to shut down using task manager. The problem comes when I've edited a file in an external editor and I am working on the tif file that has been imported back into Lightroom. The spot healing brush just does not want to work. This continues to happen even when I close Lightroom and go back to the file later. This really bums me out because it just crushes my workflow!
I have a new problem too. It could be I hit something somewhere to cause the following behaviour. When I am working on an image with the adjustment brush, the adjustment point disappears. It doesn't show up so if I want to change the brush parameters the point isn't there to click on an make active so I can adjust the parameters again. This just started since I upgraded to 3.6. I believe I was using 3.4 before and I never had this issue.
When I started to use the preview releases of AMD's Catalyst 11.10 drivers, PSP Photo X3 would hang every time on the splash screen with the "Initializing Command Manager..." text. I have to kill the "Corel Paint Shop Pro Photo.exe" process. I did a clean install of AMD Catalyst 11.9 drivers, and no problems again. At the time I though it a 11.10 preview behavior. Maybe something about being unsigned drivers (not WHQL/signed).
Well. Today 31oct2011 the AMD Catalyst 11.10 WHQL/signed drivers was released. No change, with 11.10 final X3 hangs on splash screen, back to 11.9 it works.
I know there might be other ways. Reinstall Windows, test out PSP X4, and probably more. But I'll run X3 on a virtual machine before I do a reinstall, would take me one week of work And from reading about X4, Corel have missed their target audience by a mile Why can't they understand that some of us, me at least, would pay full price for a major upgrade that did not give a single new feature. Just put all the work into tuning/bugfixing the ones already there. I'm serious about that angle.
Little more about my setup:
» Win7 Ultimate 64bit (SP1, patched up)
» AMD HD 6950 x2 (AMD Catalyst 11.10 WHQL drivers, with CAP 4)
» Corel PSP Photo X3 13.2.1.32 (Patch 5)
how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies View RelatedI want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .
It's Block's OCS Coordinate not other objects.
Where can I find feather option and smooth/refine edges option in Adobe Element 7.
View 1 Replies View RelatedAs you might see in layer panel. there is a blending option applying on text. and when i try to applying new blending option i-e drop shadow or inner shadow to layer shape 5. it will mess with also to text layer.
View 6 Replies View RelatedI cannot stand it when I make a new layer in Illustrator and the color hint becomes yellow. This usually happens on the third new layer into every project. I can go in and manually change it from yellow to the ten plus other colors, but I just want yellow completely out of the list. It's awful to look at, and I think every other color is easier.
View 5 Replies View Relatedtechnical problem with my Photoshop SC3, when I want to save my photo with the "save as" button, the programe hang and I have to reset it. I uninstall it and re-install the whole program but it keep on doing the same.
View 1 Replies View RelatedI'm using annotative scales. But for example line type scale will also change when I change annotative scale. How can I turn that off.
View 9 Replies View RelatedI've got an intermitent problem with copyclip, pasteclip and Wblocks. The functions work in some files but not other it seems to be dependent on the size of the file, i have 7 xref's in the dwg. i can copyclip to the dwg, but not form dwg. is it due to the size of dwg or what? can it be fixed? OR is there a system variable to set?
View 5 Replies View Related
