technical problem with my Photoshop SC3, when I want to save my photo with the "save as" button, the programe hang and I have to reset it. I uninstall it and re-install the whole program but it keep on doing the same.
View 1 RepliesI've just instaled PSPP x3 on a new computer (i5-2500k / 8GB / Intel mainboard / ATi HD5450 with 512MB / Win 7 Pro - 64-bit), followed by the 4 patches.
When I start PSPP everything appears OK. I dragged an image into the program and worked on it.
When I came to save it (using the floppy disk icon or File / Save) PSPP immediately went into the 'Not Responding' state. When I restarted it, the same thing happens, but also with file open icon and File / Open as well. Editing functionality seems unimpaired.
I followed the 'complete uninstall' process; CDS 2010 Clean-Up ver1.8.exe, folder cleanup and registry cleanup. I turned off User Account Control, rebooted, disabled my anti-virus, and then reinstalled. Exactly the same as before.
My studio has been using the Photoshop COM interop to do some automation which has worked really well for us, but just today I got this COM exception:
System.OutOfMemoryException: Retrieving the COM class factory for component with CLSID {99AEA70E-4D13-44BF-A878-33345CBFCBC8} failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).
which was weird since I wasn't anywhere close to being OOM...my system has 32 GB and i still had 16+GB free and ~600 GB of space on my HDD.
In any case, after that event, when I start Photoshop, the UI is active for maybe about 5 seconds before it becomes unresponsive and sits frozen for about 3 or 4 minutes before it goes 'magic-desktop'....crashes with no errors or dialogs.
Any runtime logs that Photoshop CS6 generates where I can look for more info on what might be going on?
Recently installed CS6 web premium on my computer. PSD 3D functions crash program everytime. I am using an ATI Raedon 4650 card, driver version 8.730.0.0.
View 4 Replies View Relatedi've been noticing that the program has seemed to run slower than it was a few months ago - taking longer to load up, buttons being unresponsive for a few seconds, etc. recently i noticed if i'm saving my psd file as a jpeg it will 'hang' for several seconds with the "ok" button greyed out. after several seconds it will turn blue but when i click it, it acts unresponsive but after a few more seconds it saves the document. but there's no click animation or whatever you might call it.
some specs - intel core i3/ 3.06GHz/ 4MB/ ATI Radeon HD 4670
I open the software, optimize the database, hit the triangle button and click "find duplicates." This freezes the software each and every time.
Virus caused me to wipe the hard drive and reinstall the software. The problem is the software has about 2 or 3 times the pictures it should it shows previous edits and two pictures and on top of that edited the pictures as it imported them so some pictures appear 3 times. I really need to get this taken care of. Using 64 bit Windows 7.
We have a customer using Photoshop CS6 he opens an image and performs the Quickstep process (the process where it scans the original image and rips out all of the different colours used to create the image) and then saves the image as both a PSD and EPS. If he then tries to open the newly saved PSD file the image hangs and gradually begins to open but then just locks up Photoshop to the point you have to end task to get out of it. If the EPS file is opened it opens absolutely fine. all other tasks and processes carried out in Photoshop are absolutely fine.
View 1 Replies View RelatedI'm running Photoshop CS6 x64 on a Lenovo T510 running Windows 7 x64.
My Lenovo T510 laptop will automatically switch from Intel HD Graphics adapter (CS6 reports The Intel HD graphics card doesn't work with CS6's "Use Graphics Processor") when undocked to NVidia graphics adapter (CS6 reports as NVS 3100M/PCIe/SSE2) when docked. See [URL]
Unfortunately, this means that undocking with CS6's default settings will hang Photoshop.exe with 100% of one CPU core. Photoshop recovers again after the PC is docked and the NVidia graphics adapter is enabled again.
When I turn off CS6's hardware acceleration, the problem goes away.
Updates says I have the latest Photoshop CS6 installed.
It's brand-new install and I haven't changed any settings since installation.
This seems like a bug in Photoshop: PS should be smart enough to realize that the graphics card has changed instead of hanging the CPU.
i had purchased 2 units of AutoCAD LT 2012 Commercial New SLM with Subscription in the Box**New last year. i had installed them in my desktop & laptop ( both windows xp 32bit ). i am facing problem while i doing the copy & paste option, my computer will hang & i need to restart the programme again.
View 5 Replies View RelatedI'm having a problem with my Adobe Illustrator CS6, whenever I click an image to select, i need to wait for loading until it's selected. Quite annoying everytime I need to select few elements on my artboard.
View 7 Replies View RelatedEverytime i open Adobe Edge Animate, it takes a good minute or too to stop the spinning ball. Then after every mouse click, it spins for another couple of minutes, and so on. I have tried creating the launchd.conf file with the proxy information, I have uninstalled and installed numerous times. I am working from CC with a Mac Book Pro Retina, 15-inch, Early 2013 OSX 10.8.5. I am having no other issues with any of my other applications and them being responsive.
View 7 Replies View RelatedI have a large drawing with 5 meter contours that are 2D polylines on elevation. In Civil 3D 2012, when the crosshairs touch a polyline the drawing hangs for quite awhile. I've cut a piece out of the drawing so it is 28mb instead of 121mb and now the hang time is much less but it still does it. It does not happen in AutoCAD 2012.
Windows 7 x 64
Intel i7-4770 CPu @ 3.40 GHz
24 GB RAM
NVIDIA Quadro K2000D
Civil 3D 2014 (i.108.0.4, SP1)
I have a serious problem when hatching in AutoCAD LT 2011, it's making my PC hang but only when I'm using the 'Add: Pick points' command. It's so bad that I can't even call up the task manager to stop the process and I have to switch it off and on again to get it working.
I've never encountered this before with earlier versions of AutoCAD, is there a way around this? It's driving me nuts!
I'm using AutoCAD LT 2011 on Windows Vista.
Since opening my most recent backup file I think I may have found the cause.
I had inserted a .jpg image (150 x 150 @ 8KB) that I was using to trace around it and it was these tracings that I tried to hatch. I have since deleted the image and now the hatching causes no problems.
I waited months to update to 3.6 because I finally had Lightroom running well on my machine. Previously versions would hang on the spot healing brush to the pointed I'd have to shut down using task manager. The problem comes when I've edited a file in an external editor and I am working on the tif file that has been imported back into Lightroom. The spot healing brush just does not want to work. This continues to happen even when I close Lightroom and go back to the file later. This really bums me out because it just crushes my workflow!
I have a new problem too. It could be I hit something somewhere to cause the following behaviour. When I am working on an image with the adjustment brush, the adjustment point disappears. It doesn't show up so if I want to change the brush parameters the point isn't there to click on an make active so I can adjust the parameters again. This just started since I upgraded to 3.6. I believe I was using 3.4 before and I never had this issue.
When I started to use the preview releases of AMD's Catalyst 11.10 drivers, PSP Photo X3 would hang every time on the splash screen with the "Initializing Command Manager..." text. I have to kill the "Corel Paint Shop Pro Photo.exe" process. I did a clean install of AMD Catalyst 11.9 drivers, and no problems again. At the time I though it a 11.10 preview behavior. Maybe something about being unsigned drivers (not WHQL/signed).
Well. Today 31oct2011 the AMD Catalyst 11.10 WHQL/signed drivers was released. No change, with 11.10 final X3 hangs on splash screen, back to 11.9 it works.
I know there might be other ways. Reinstall Windows, test out PSP X4, and probably more. But I'll run X3 on a virtual machine before I do a reinstall, would take me one week of work And from reading about X4, Corel have missed their target audience by a mile Why can't they understand that some of us, me at least, would pay full price for a major upgrade that did not give a single new feature. Just put all the work into tuning/bugfixing the ones already there. I'm serious about that angle.
Little more about my setup:
» Win7 Ultimate 64bit (SP1, patched up)
» AMD HD 6950 x2 (AMD Catalyst 11.10 WHQL drivers, with CAP 4)
» Corel PSP Photo X3 13.2.1.32 (Patch 5)
When I try to access a hatch pattern from the Hatch Creation Ribbon Contextual Tab, C3D stops working and I have to force the program to quit. I've tried repairing the installation, which didn't work. I've also compeltely uninstalled and then reinstllaed the program, and have applied the Service Pack 1 update, but the problem persists.
However, accessing a hatch pattern after using the "Hatch" command from the command does seem to work.
I am facing problem while using Save / Save As / Save for web options in my Photoshop. On clicking Save / Save As commands, my photoshop gets closed abruptly and I am losing all data. If I choose Save for Web option, the file Save dialog box appears and when I click on the 'Save' button, the application gets closed abruptly.
It was working fine yesterday. My version is bundled in the Technical Communicator suite 3.5 and I faced some problems with Adobe Acrobat, for which my IT team took support from Adobe and got it resolved just two days ago. (Case ID - 184809966)
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View RelatedI am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.
URL....I am using PSE 12 as a photo editor for Aperture 3.5.1 and the photo is duplicated (as a tiff) in Aperture and PSE editor opens with the image. When I close the file and say to save the file it brings up the save as window.
I tell PSE 12 to "on first save -- save over current file" it now brings up the "save as" window and won't save over the file (changes the file type from .tiff to .tif)
I've created an action that uses the save for web dialogue to optimise images for the web. When I use the batch command to process a full folder of images, even though I have "Override action "save as" command" checked, it ignores this and still uses the location that was used when the action was created.
Apparently this is a known issue in CS6 and previous versions but whether this has been fixed in Photoshop CC?
I have Photoshop CS6 and Elements Premiere 11 and both were showing estimated file sizes properly up until a couple of weeks ago, and both stopped at the same time. Using Image, Mode I have verified on both that the images I am trying to save are 8 bit and not 16 bit images. I am on Window 7, 64bit.
View 9 Replies View RelatedFrom the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View RelatedAfter designing, i try to save the image by clicking save as, but it does not trigger any thing. even if i click save alone. it's still the same thing. Until i try to close the interface, then it will pop-up a dialog message that do i want to save before i close or not, then i click yes but it does not display png,jpeg and the likes as file extension. it only displays psd and some uncommon extensions.
View 3 Replies View RelatedI cannot save images from Photoshop CC as a dialogue box opens with "cannot save image.....as you do not have write access
View 2 Replies View RelatedWhen I first started using CS6 I would edit my photos and when I used "save as" to save my photos then open them in a different photo viewer they would have lost a lot of color and contrast. When I reopened them in CS6 they still had no color. This is all occured on my PC. I used to use PSE 7 (on my PC) and the "save as" function to save them and they turned out fine. I recently got an iMac and when saved on there the same way and reopened in a different viewer they'd have the correct color,
but when opened on my PC the color would be lost again. Also tried opening the images I saved on my PC in CS6 on the iMac and they still had no colo/contrast. So that would mean it's not a monitor calibration thing. I'm trying to figure out how to save my photos so they have the best quality they can have for printing and also the correct color for clients to view on their computers.
PS: I did use the "save for web" option on my PC and the photos have the correct color that way! But those aren't the proper size and stuff for printing. Also I'm very new to iMac and full photoshop so I'm not sure what sizes/pixels/color modes/etc are normal or what photos are supposed to be.
I'm running Windows XP with Photoshop CS6. Since the "Save" button runs off the edge of my monitor, I can't click Save. I also can't move the dialogue box up far enough to get to it before running out of screen space. I tried just hitting the enter key, but nothing happened. I end up having to do a control-alt-delete to get out of Photoshop altogether.I've never had this problem before when I had CS2 or with the CS6 I have at work.Is there a way around this?
View 2 Replies View RelatedI'm only on CS5. Is there a way to save a crop as one might save a non destructive layer?
View 4 Replies View RelatedI need to convert a large number of images to png and need to later sort them by the original date created. "Save as" results in the current date/time as the date created. CS5.
View 4 Replies View RelatedI have a PSD file (16bits/prophoto RGB) with some layers. I combine the layers to ONE and change the bit depth to 8 bits.
Then I do one of two things:
(a) I save the file for the web in JPEG 90% high-quality and with sRGB ... filesize 340 602
(b) I change the color profile to sRGB and save the file as JPEG in the highest quality (10) ... filesize 174 549
I am at loss here. How on earth is it possible that the second file is almost half the size as the one saved for the web?What effect causes this? It is very easy to save for yhe web but as long as the JPEGs are that bigger it's no option.
so photoshop totally disappointed me yesterday, i spent HRS creating a graphic and i went to save it to PNG, it said i could only save it as a copy; so i clicked ok....my graphic wasn't saved AT ALL!...what am i doing wrong???
View 2 Replies View Related