Photoshop :: CS6 / Preserving Presets With A New Install?
Sep 21, 2012
I am upgrading from Windows XP to Windows 7. When I upgraded from CS5 to CS6 on my present computer, I said yes to preserving the old presets. But how will this work on a new computer? And, in fact, all of my versions of Photoshop going back I can't recall how far have been upgrades. How is this handled with a new computer? I have the CS3, CS5 and CS6 installation disks. I am not sure about the older versions. So, two questions here: 1. How is the CS6 installation handled if all I've had for the past who-knows-how-long is upgrades. I started with one of the very first Photoshops. And 2.
View 12 Replies
ADVERTISEMENT
May 8, 2012
How do I ensure custom presets will be available when I install CS6 upgrade? (Photoshop)
View 7 Replies
View Related
Jan 28, 2013
How do I install presets.
View 1 Replies
View Related
Aug 14, 2013
I just installed PS-CC and LR5 on a new computer after a catastrophic failure on the old one, which was running PS-CS6 and LR4. Is there a way to recover my custom settings and presets from a full backup of the old computer and apply them to the new applications on the replacement computer? I have full backups, but no export data for any of the settings or presets. And because the old computer is dead, I can't just run an export.
View 7 Replies
View Related
Jul 24, 2012
My hard drive crashed - had to reload Lightroom 3. Now, I am not able to view presets, or install any new ones? Under 'develop' - the "new preset" is grayed out and I am not able to add?I depend on this program!!!
View 1 Replies
View Related
May 8, 2013
When trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
View 8 Replies
View Related
May 20, 2013
I am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies
View Related
Nov 17, 2012
I have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
View 2 Replies
View Related
Mar 13, 2012
I'm saving for web and want to preserve all metadata except camera info, but besides the camera info, it's not saving the description either. Is it right?
Actually, I only want to save copyright information, author, keywords and description, but there's not such option.
View 7 Replies
View Related
Dec 15, 2006
I have used a template in Photoshop CS2 to create a DVD/CD Cover and I have an issue saving the image for upload at the correct dimensions.
This is what I have - CD cover @ 4.75 x 4.75 inch with 300dpi. This gives me an image with a resolution of around 3000 x 3000 pixels.(approx)
There is no problem printing from PS as the dimensions in Inches is the default print size. The problem comes when I export the image as a JPEG ready for upload and sharing. It seems the pixel resolution becomes the default size settings. This will give the end users problems in printing at the correct size for their CD cases.
I, can get round this as my printer allows me to 'print at the original size' which defaults back to the size set in Inches but I don't think everyone has this option.
Is there any way to ensure that the end user will d/l or save the uploaded image at the correct size so that they will not have to do anything other than print it?
The last thing a want to do is make it a difficult thing for them to obtain.
FYI - I would like to keep the dpi resolution if possible as there is a lot going on and this might be lost if the quality is reduced.
View 3 Replies
View Related
Oct 17, 2005
I have a couple of logos that I need to "archive" and catalog in the following formats:
.tif
.eps
These logos were done in PSCS and are now in the .psd format - they contain a number of layers including a base transparent layer.
The question is can I preserve the transparency within the 2 above mentioned formats? If so how? I made a few attempts at it with each format but came up with a background color each time.
View 4 Replies
View Related
May 30, 2005
How can I preserve my colors so that when I export them to images, they are as close to the colors as I see them as when I view them in a browser?
Right now I'm using:
Adobe RGB 1998 for RGB Colorspaces (Preserve Embedded Profile)
Engine: Adobe ACE
Intent: Relative Colorimetric
[X] Use Blackpoint Compensation
[X] Use Dither (8bit/channel images)
View 3 Replies
View Related
Apr 12, 2013
I'm using Photoshop CS5.5, and I'd like to batch process a folder with thousands of images ordered in several deeper subfolders.
The problem is, that I'd like to do this with preserving subfolders order, as it's the most important part of my project.
View 2 Replies
View Related
Oct 1, 2012
Shift-dragging centers it, but I have multiple documents (pngs with transparency) of the same dimensions and layers in a variety of positions that need to be preserved (I'm composting some 3d renders). Is this possible?
View 3 Replies
View Related
Jul 23, 2011
I want to change the color of my car whilst preserving all the details like door handles but change seem to figure out a way.
View 9 Replies
View Related
Aug 26, 2004
describe to me the process by which you would change the color of an object while preserving the gradients of that object? Attempting to do this on a picture of a machine but my efforts turn out "cartoony."
View 2 Replies
View Related
Feb 10, 2009
I have removed the white background from an image. The transparent background remains preserved when I keep it as a psd. but when I try to save it as a jpg or print to pdf the white background reappears....
View 3 Replies
View Related
Jul 13, 2008
I need to remove the green and blue colours of this image, replacing them for white, as the background colour, however I need to preserv the shapes and shadows.
View 2 Replies
View Related
Feb 26, 2004
how to preserve color profiles when saving for web as a jpeg...
View 1 Replies
View Related
Mar 14, 2013
I have CS2 Premium which I'm running on an older PowerPC Mac (G5 - Dual 2.3 GHz ) running OS 10.4.11. I've had this setup for many many years (registered/activated with Adobe) but suddenly one day I could no longer launch my Photoshop app: when I clicked on the Pshop icon it would start the launch (open) procedure ... and then almost instantly it would quit (in just a few seconds ... before the application even got to the 'title/credit' screen).
I've recently tried uninstalling CS2 (everything except Acrobat) and I ended up doing a manual uninstall of Version Cue. I've been on Macs for 20+ years so figured this would be a pretty straightforward procedure - uninstall -> reinstall and then back to work. Nope.
I'm attempting a fresh installation direct from the original CS2 CDs. In any event, when I try to (re)install CS2 - and after going through the standard screens with Adobe's usage terms agreement and installation hard disk selection - I arrive at the screen where one selects which application(s) to install by checking the various boxes (or alternately, to install the entire suite) but the 'Adobe Photoshop CS2/Adobe ImageReady CS2' line and checkbox are grayed out, so it will not allow me to check them and continue with the Photoshop installation process.
View 13 Replies
View Related
Jul 1, 2013
We currently print using a flat bed ink jet printer CMYK++(fixative) capable of printing several images at one time. We create the file using PS then use bridge and contact sheet II to create the print ready document.
The issue is that contact sheet II makes you select a colour for the background of the document. If we chose white when we export as a PDF the printer interprets the white area as "coloured pixels" and prints our fixative ink over the entire background rather than under the pixel of the image.
I need to be able to use a contact sheet type solution but be able to preserve the background transparency to stop this from happening.
View 1 Replies
View Related
Sep 16, 2012
I've got a template file, which has my photo stored as Smart Object. There are some filters performed on it, and some groups of filters I select to match the image. It works great. However, the only caveat is that the EXIF data is stored from original image. Photoshop doesn't read the EXIF from the most recently imported file.
View 3 Replies
View Related
Feb 17, 2013
I have a PSD file that has a couple layers that are shadows and highlights for t-shirt textures. Then I have other layers that are the colors of the shirts, so I can swap the color out and it looks like the appropriate t-shirt color with the shirt textures and shadows. My ultimate goal is to export the shirt textures with no color background and keeping it a transparent png. I want to use this transparent image on a website that has color behind it and can change the color using html Divs.
The issue is when I turn off the lower layer colors of the shirt the image is not trasnparent it is white. The multiply layers don't stay transparent. Is there a way to export the multiply layers as transparent? Is there a way to remake the layers as a raster image, rather than using the layer blending modes?
View 10 Replies
View Related
Aug 27, 2005
I'm trying to create a selection out of the square marquee tool with rounded corners. The only way I know how to do this is to set the feather to 5px or 10px or whatever. But when I try to fill this selection with a certain color (with the paint or pencil tool) I get a gradient. That is, instead of a uniform color all throughout the selection, it's almost clear near the edges and slowly becomes opaque as you move closer to the center of the selection. I do I create a square selection with rounded edges so that filling it creates an evenly opaque color?
View 6 Replies
View Related
Apr 5, 2003
I am creating an image in photoshop that a printer is going to use to make a postcard to advertise my website. He needs it in 300dpi resolution in order for it to print correctly. I have already created the vector image that is in 300dpi res, but need to add photos to the image. He said that everything needs to be in 300dpi resolution, including the photos that I add to the image.
I already have one photo that is in jpeg format that is at 300dpi, but I did not create that. I scanned in a photo at 300dpi as a tif file, and would like to convert it to jpeg while preserving its 300dpi resolution. I have tried everything in Photoshop that I know (which is not all that much) to try to accomplish this task, but to no avail.
View 15 Replies
View Related
Dec 20, 2006
As you can see, the sword is curved. I want to make it look straight without messing up its dimensions, i.e. I want to straighten it in PhotoShop as like it was made of clay. I hope you get what I mean.
I have the image of the sword on a separate layer, the background is a different layer.
View 8 Replies
View Related
Oct 16, 2007
I do a lot of work for TV and as such have to often provide flattened layered art to broadcasters. I flatten most layers and flatten layer styles as well.
Question: is there any way to preserve a layer style blend mode when flattening i.e. I have some rasterized text with an Outer glow. The outer glow has a Linear Burn blend mode (or similar).
Is there a way I can merge this layer complete with style to a flat layer and PRESERVE the way it looks? Often I try this and it looks different (obviously because there is a blend mode being implemented with the layer style.
Any pointers how to get around this? I use CS2 by the way.
Another one - I often whack stuff into After Effects and put on an adjustment layer at the top with a gaussian blue (so it blurs everything below). Is there a way to do this in Photoshop i.e. an adjustment layer placed at the top of the layer stack with a BLUR? Any workarounds people know of or is this just something I can do in After Effects?
View 1 Replies
View Related
Feb 27, 2013
When I use the 'Copy with Basepoint' command from the clipboard and paste the results into another drawing, all of the grouped items become ungrouped.
Is there a way of preserving grouped geometry when copying from one drawing and pasting to another?
View 5 Replies
View Related
Apr 7, 2012
I have a hi-rez figure that I'd like to lower the polygons on. I was wondering if it's possible to reduce the polycount on the character without destroying the rig.
I read somewhere that Optimizer would work for this. I this true? Is there another way to do it or will I have to rerig it?
Also, is it possible to preserve morphs as well? I know some of the points change so I can understand if it's not.
EDIT: It appears it doesn't work right off the bat. Is there a simple way to update the bone envelopes to the new geometry or do I have to reskin the entire mesh manually? (Seeing this, I know morphs will no longer work."
View 3 Replies
View Related
Mar 12, 2014
How do I re-install AI CC after it's been uninstalled because the initial install was corrupt? AI isn't availbale for download again in the app section of CC.
View 1 Replies
View Related
Jun 9, 2011
I'm a new user of X4. I'm making a project using several transparent layers, with layer 1 set as background image. I then draw several images into the succeeding layers. My template is set at 480x270 pixels.
Is there any way to export my drawings with their original size and location preserved with respect to the background image? The thing is I need to recombine the images in the different layers later on (in a different program and project) and I need them to be in their right sizes and positions as when I created them in order to reconstruct the image accurately.
View 3 Replies
View Related
