describe to me the process by which you would change the color of an object while preserving the gradients of that object? Attempting to do this on a picture of a machine but my efforts turn out "cartoony."
View 2 Replies
I want to change the color of my car whilst preserving all the details like door handles but change seem to figure out a way.
View 9 Replies View RelatedHow can I preserve my colors so that when I export them to images, they are as close to the colors as I see them as when I view them in a browser?
Right now I'm using:
Adobe RGB 1998 for RGB Colorspaces (Preserve Embedded Profile)
Engine: Adobe ACE
Intent: Relative Colorimetric
[X] Use Blackpoint Compensation
[X] Use Dither (8bit/channel images)
how to preserve color profiles when saving for web as a jpeg...
View 1 Replies View RelatedExporting to H.264 while preserving your color correction. I have not found anything definitive that addresses this issue. I'm bringing it up here as I do a lot of web delivery in H.264 and am tired of the color/gamma shift.
View 1 Replies View RelatedUsing CS6, I created a sky gradient on a new layer, then imported some photos to other layers for a composite. Then I noticed horizontal banding of varying widths in the sky area of the gradient. When I use the Move Tool to move the gradient layer around, the bands move along in a fixed position, so it's not my monitor. When I Option-click on the gradient layer eyeball icon to make just that layer visible, there is no banding on the screen, just a smooth gradient as it should be.
I have never noticed this happening before. What causes it and what can I do about it?
when i reopen a doc with vector shapes on cs6 the shapes that have a gradient change the colors to a gradient made of the foreground and background colors that i had set in that moment:( like all the gradients turn grayscale, usually or any other 2 color combination i had. i dont want to rasterize or convert to smart objects the vector shapes.
View 5 Replies View RelatedI click the gradients panel and then the dropdown of gradients on the left side.
All I see is: White Black, Gold Dust, and Blue Sky.
I know AI has a ton more gradients premade than that so why aren't they in the list? How do I add more to that dropdown?
When I drop a swatch color on a gradient, it doesn't link to the swatch color like in a solid fill.Nevermind the UI inconsistency with this behavior, since Adobe probably doesn't care, but how do I get around this?
Creating a Swatch from the gradient is not a solution for me, as I use the same base color in different gradients.
I create a logo in Illustrator. It is 2 colors, black and pantone 287. The gradient is only with the blue color. I save the file as a EPS. I place the EPS into another program, and generate a new EPS file with all the elements and type combined. My printer requires that all the fonts be converted to outline so I open the EPS again in Illustrator. The logo with the gradients has been converted to CMYK and the gradients now appear in the LINKS panel but they are not editable.
Why is this happening? How can I preserve the EPS so that I don't have to manually replace the converted gradient logo EVERY time I have to make a new EPS file?
I have applied a 3D>Extrude and Bevel on my text. Now problem is that when doing it, my border(part that is extruded) causes a color banding, since it rasterizes the gradients. See my image below.
How do I take away those nasty lines?
I have to print an eps file. I have converted it to PDF which gets rid of the thin white lines but creates detectable gradients in the color of the background. Even when imported to photoshop, the gradients are still there in defined color stripes. I have tried exporting from illustrator and pdf to tiff format but still get the gradients. Is there any way that the file can be converted without these gradients?
View 1 Replies View RelatedWhen I have any kind of layer, and I want to change the foreign or background color (with the color picker) I just cant. When I click on the foreign or background color it automatically selects the eyedropper tool, and I don't want this to happen.
View 1 Replies View RelatedA while back I saw a video about using the video editing capabilities. In particular the video showed a car with a colored sheet over it and the in the video the sheet was either pulled off the car or the car moved out from under the sheet (I cant remember which). Then the video showed how to use the color replace tool to change the color of the sheet throughout the entire video.
View 2 Replies View RelatedI have a star that I would like in a specific color, but am having issues changing it with the replace color and/or color replacement tool. The image is small, but I am trying to have all the pixels. The color I want to use is Pantone solid uncoated 655 U. This is the image I am trying to change.
View 4 Replies View RelatedWhy won't the color picker change my font color? It has worked for months and today it won't.
View 1 Replies View RelatedIn photoshop elements 11, in a photo collage, in graphic tab, how do i change the background to a color in the color wheel?
Same thing for the graphics, i only have 6 choices, i want to add a graphic stored on my pc or other ones in the program.
In photoshop elements 11, in a photo book, page 2 and 3 are stored as one image, and have to have the same background color, and layout, how do i change that?
I have a solid red image and I want to change that red to an exact red hex code I have. Is there a way to change this color without affecting the quality of the image? I thought this would be really easy, but everything I've found online doesn't give me the color I want, or It doesn't allow me to be 100% accurate.
View 7 Replies View RelatedI have two classic cars and have not decided on color combinations . I want to be able to have a picture of the car and then go into a color chart and be able to insert any color and see it in order to make a decision?
View 1 Replies View RelatedIs there a way in photoshop to take all pixels of a certain color code, and change only those pixels to a different color?
View 2 Replies View RelatedI am upgrading from Windows XP to Windows 7. When I upgraded from CS5 to CS6 on my present computer, I said yes to preserving the old presets. But how will this work on a new computer? And, in fact, all of my versions of Photoshop going back I can't recall how far have been upgrades. How is this handled with a new computer? I have the CS3, CS5 and CS6 installation disks. I am not sure about the older versions. So, two questions here: 1. How is the CS6 installation handled if all I've had for the past who-knows-how-long is upgrades. I started with one of the very first Photoshops. And 2.
View 12 Replies View RelatedI'm saving for web and want to preserve all metadata except camera info, but besides the camera info, it's not saving the description either. Is it right?
Actually, I only want to save copyright information, author, keywords and description, but there's not such option.
I have used a template in Photoshop CS2 to create a DVD/CD Cover and I have an issue saving the image for upload at the correct dimensions.
This is what I have - CD cover @ 4.75 x 4.75 inch with 300dpi. This gives me an image with a resolution of around 3000 x 3000 pixels.(approx)
There is no problem printing from PS as the dimensions in Inches is the default print size. The problem comes when I export the image as a JPEG ready for upload and sharing. It seems the pixel resolution becomes the default size settings. This will give the end users problems in printing at the correct size for their CD cases.
I, can get round this as my printer allows me to 'print at the original size' which defaults back to the size set in Inches but I don't think everyone has this option.
Is there any way to ensure that the end user will d/l or save the uploaded image at the correct size so that they will not have to do anything other than print it?
The last thing a want to do is make it a difficult thing for them to obtain.
FYI - I would like to keep the dpi resolution if possible as there is a lot going on and this might be lost if the quality is reduced.
I have a couple of logos that I need to "archive" and catalog in the following formats:
.tif
.eps
These logos were done in PSCS and are now in the .psd format - they contain a number of layers including a base transparent layer.
The question is can I preserve the transparency within the 2 above mentioned formats? If so how? I made a few attempts at it with each format but came up with a background color each time.
I'm using Photoshop CS5.5, and I'd like to batch process a folder with thousands of images ordered in several deeper subfolders.
The problem is, that I'd like to do this with preserving subfolders order, as it's the most important part of my project.
Shift-dragging centers it, but I have multiple documents (pngs with transparency) of the same dimensions and layers in a variety of positions that need to be preserved (I'm composting some 3d renders). Is this possible?
View 3 Replies View RelatedI have removed the white background from an image. The transparent background remains preserved when I keep it as a psd. but when I try to save it as a jpg or print to pdf the white background reappears....
View 3 Replies View RelatedI need to remove the green and blue colours of this image, replacing them for white, as the background colour, however I need to preserv the shapes and shadows.
View 2 Replies View RelatedWe currently print using a flat bed ink jet printer CMYK++(fixative) capable of printing several images at one time. We create the file using PS then use bridge and contact sheet II to create the print ready document.
The issue is that contact sheet II makes you select a colour for the background of the document. If we chose white when we export as a PDF the printer interprets the white area as "coloured pixels" and prints our fixative ink over the entire background rather than under the pixel of the image.
I need to be able to use a contact sheet type solution but be able to preserve the background transparency to stop this from happening.
I've got a template file, which has my photo stored as Smart Object. There are some filters performed on it, and some groups of filters I select to match the image. It works great. However, the only caveat is that the EXIF data is stored from original image. Photoshop doesn't read the EXIF from the most recently imported file.
View 3 Replies View RelatedI didn't notice when and why it happened, but now when i draw white line, it appears brown. I didnt change any settings, just did my usual work, when it appears. Other colors are normal. What could it be?
View 6 Replies View Related
