Photoshop :: CS6 - Getting Error When Try To Access Bridge
Jan 17, 2013
We are having issues with Adobe Bridge working properly with Photoshop. When trying to access Bridge through Photoshop we receive the following error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"
- We have the Master Collection CS6 installed
- Bridge CS6 is working fine as a stand-alone program
- This is installed on Windows 7 x64
- I am unable to find an uninstall location for Bridge CS6, it is not under control panel > Adobe Master Suite
- All adobe products are up-to-date as of this morning.
Following on from above the programme fails to write to E:UsersUserAppDataLocalTemp..I am asked to change the environment variable "TMP" to an existed folder on C drive.
iMac with OS X 10.8.2 and Photoshop & Bridge CS6 and Lightroom 4.When try and access photos via Bridge most of my folders have a little red circle with a minus inside, denying me access to the folders.However, if I use mini Bridge in PS I can access all of my folders.
I'm working on some art on Adobe Photoshop CS6 Extended Trial and suddenly out of the blue, whenever I use the Brush Mixer tool, a message appears on screen saying that I can't use it because there isn't enough memory on the RAM. So I tried to enter Preferences on Photoshop to try and increase my memory usage however every time I do that, a message appears on screen saying "An Integer between 96 and 67 is required. Closest value inserted". Sometimes when I click "OK" on this box, it doesn't disappear and I'm forced to close Photoshop via Task Manager. Or sometimes the Preferences box box will open but when I try and click on the "Performances" tab within the Preferences box, the same Integer error message appears again and again and I can't click on the "performance" tab whatsoever.
The error is the following: "Error 1606. Could not acess network location 0." It happens after the computer specifications process. I've tried to search for solutions, but with no results at all... I've tried to track it down in registry, but also with no results.PC: LG E500OS: Windows Vista Home Edition Help?
The crashes always occur while editing a photo in the Camera Raw editor in Bridge (most of the time they are JPG files, yes you can edit JPGS in the Adobe Camera Raw editor) and then hit the "Open Image" button that will open the image in Photoshop. Often Bridge, Photoshop and InDesign all are "not responding" and have to be force quit.
Always when I'm editing a photo in Photoshop that is on a server I get the " Could not create a preview because of a disk error message" which I have to hit the OK button to clear. I just tested this several times and I never get the disk error message when editing an image from my hard drive. I suspect there is a network communication problem.
MacBook Pro 15" Early 2011 2.2 GHz Intel Core i7 8GB 1333 Mhz DDR3 RAM AMD Radeon HD 6750M 1024 MB OS 10.8.2 (12c60)
When i go to Edit > Creative Suite Colour Settings in Adobe Bridge, I am receiving the following error: "Suite Colour Management is not enabled. Suite Colour Management requires that a qualifying product has been launched at least once to enable this feature.
Then I searched this issue in Google and I got a solution from the link [URL]...I did all instructions one by one but my issue still not resolved. i purchased this license very recently From Al suwaidi computers
I'm running After Effects CS6 11.0 on MAC OSX and everytime I attempt to apply text, either by creating a new text layer from the drop down menu or dragging open a text box I get "Unable to Access Resource P_TextSmallCaps_Sm_N_D (type png)"
Is this a png file missing from the program, a fixable bug or what?
I'm only a few seconds in to my video and a few clips in... and when I play it back I get weird audio feedback like a repetitive noise that appears to be an artifact of decompression. I tried to produce an output to see if it shows up there as well (as opposed to my project view playback) and near the end of processing the short clip, I get an error message:
Fatal Error: Unhandled Access Violation Reading 0xffffffff Exception e6d7a0adh. This error only occurs while I am using dimension commands. This is happening on a daily basis, no resolution from AutoCad. Error reports sent each time it happens. This particular failure never happened with 2012.
so i've been getting this pop up window everytime i try to open autocad today. yesterday night i was using it fine.now whenever i try to open the program, it says "fatal error unhandled access violation reading b14c4b12h"..i sent an error report to autodesk and they suggested a patch. and after restarting my pc its still not working.
i have win8.1 with autocad2014.it pisses me off koz i have school assignments to do and it's not working
I have recently installed Civil 3D 2013 "Gobal - Bridge Modeler "from the Productivity Tools page in subscription centre.
Add-in appeared to installed sucessfully and tab added to Civil 3D ribbon but features do not work. Selecting a bridge type I am given following error message, "Your Evaluation Period has Expired on ...2010".
Software was only purchased relatively recently therefore this should not be the case.
I'm running AutoCad LT 2012, this message appears right after the startup loading page and its always different with the exception of 3544 at the end of every code. I've tried a repair and a reinstall but this keeps popping up.
I have just installed Autocad LT 2013 (licence bought yesterday) on a new Lenovo E330 laptop and the first time I'm trying to run Autocad I'm getting the following error: "fatal error: unhandled Access violation writing 0x0000 exception at 0h".
[URL]
1. regediting the DWORD Low to all 0000000, but it goes back to whetever value it was (i have tried with changing value and restarting, not restarting... etc. numerous combinations) and the error is still there
2. On one ocasion an autodesk employees on that thread informed the user that the generated error report was pointing towards a usb display adapter, and as I was using an external replicator (USB) I decided to try with the laptop running by itself on it's own graphics, that didn't change the error message. Next step update the HD4000 driver to the latest from intel, but still the same fatal error.
On top of the above i have also completly unistalled Autocad and all related products, performed new installation with same fatal error again after the installation. I have tried different comatibility modes when running the software and i have tried running as administrator (although I am logged as administrator anyway)
Inserting blocks from Design Center into model space causes the fatal error: access violation message to pop up.
This never happened in 2012, and I used it from day one.
My livelihood as a 2D drafting student depends on being able to use the blocks from DesignCenter, and now all of a sudden (I've been using 2013 since the day it released with no problems at all until about a week ago) it crashes every time I try to insert a block, regardless of which method I choose to insert with (i.e. right click insert or dragging into the model space window).
I'm on an Alienware M17x R3 running Windows 7 Home Premium with a Quad-core intel i7 processor, 16 GB of RAM, and an NVIDIA GTX 560M 1.5GB graphics chip.
I've tried system restore, program repair, clean uninstalls, and none of it fixes the problem. It seems that once the levee broke, so to speak, the bug is there to stay. Or perhaps more accurately, it was there the entire time and it was only a matter of time before it surfaced.
In either case, I would love, after having been a guinea pig, to see a patch issued for this if possible. Not being able to use the sample dynamic blocks is hell. Barring a patch sometime soon, I'm strongly leaning towards going back to 2012, which worked like a charm.
Having a problem with AutoCAD Civil 3D 2012 which keeps crashing with a fatal error on a Win7 Pro (64) machine. Was able to get the user to make a screenshot on the most recent occasion, and the error was as follows:
FATAL ERROR: Unhandled Access Violation Reading 0x0014 Exception at f5a69bb9h.
Having looked through your forums I see that this may be related to the video card, which is a Nvida Quadro 5000. I've already updated the driver to the Quadro Performance Driver, v320.78, but the problem continues.
Is there a different partner certified driver that I should be using (can't seem to find any for Civil 3D) , or is the issue related to something else?
I'm recieving this error when I go to paper space and attempt to set my profile view. I am working for a consultant using a required template from the city and when I open just the main template I recieved a message about 10 errors, do I want to recover, so I do and it finds no errors but I continually get the message. I'm thinking that fatal error message has something to do with the 10 errors. what those fatal error codes are in the subject line?
We're running Autodesk Product Design Suite Premium 2013 on computers specficially designed by chaps so they meet the required spec (Windows 7).For two months we have been running this product without any problem however over the weekend we moved offices and the computers have been "poked about" by the IT support team as they moved servers / changed admin rights / drank coffee. This problem however is only affecting the one computer - the other is running fine so I assume they've not broken anything.
It ran on Tuesday til Thursday without any problems however this morning AutoCAD is having an abortion hissy fit (fifth crash in two hours) and I am getting:
"Fatal Error: unhandled access violation 0xffffffff exception at e47fde0ah" crashing the system while moving lines on a very simple AutoCAD 2D drawing (500kb). This
I've turned Aero Theme off and am running no other computer programmes (CPU sits at 13% when it crashes and doesn't spike).
When opening the navigation bar, the error message: unhandled exception error C0000005 (Access Violation Reading 0x0144) at address 5E03F5BFh or 5DFAF5BFh. What does this mean? The program (AutoCAD 2012 student version German 64 Bit) crashes as well when creating a new file and open the existing files in the registry file Karter. I have a Toshiba Satellite C660-29V with "IntelCore i3" processor and Windows 7- 64 Bit. Graphics Controller: Intel (R) HD Graphics Core (i3). Driver: Driver Version: 8.15.10.2189 Driver Date: 28.07.2010
How can I fix it so that AutoCAD 2012 running properly?
