I can't seem to use the adjustment tools in RAW editing of JPEG's. An error message comes up.."Unable to create local adjustments. All the local adjustment controls are set to have no effect on the image". These are tools I have been using regularly and all other tools work. I have shut off my MAC and rebooted but still get this message. How can I reenable these adjustment tools??
View 1 RepliesIs there a way to specify the begin and end exposure adjustment on the gradient tool?
What I really want to do is apply an even exposure adjustment to the bottom section of an image. There's a hard line where I want the adjustment to begin, so I don't really need a gradient. I know I can do this with the adjustment, but that requires passing the brush over a large section of the image and, of course, being very careful in lining the edge of the brush up with the edge of what I want to lighten. I'd like to be able to put a line across the image and say "lighten everything below this line" by x amount.
Is there an Adjustment Tool or Graduated Filter Tool in Camera Raw for Photoshop Elements 12?
View 2 Replies View RelatedI am using CS5 12.0.4 64 bit, Vista OS. The targeted adjustment tool lightens/darkens the entire photo instead of just the area targeted.
View 1 Replies View RelatedI have PS CS6 with the latest updates, using a Mac computer with OS 10.7 also with the latest updates. When in ACR, the adjustment brush does not appear on the screen unless I click the bracket keys which increase or decrease the size of the brush.
If I paint a segment and the let go of the brush key, the brush disappears again. I have to keep repeating this if I am painting multiple parts of the photo. I have thrown away and reset the preferences for both Photoshop and Bridge, as well as repairing disk permissions on my Mac.
I have a file with a lot of moire on a child's dress and am having problems using camera raw moire adjustment tool.
I opened a jpeg file (not raw) in camera raw. When I use the moire adjustment brush - set to +100 - and click on the eyeglass tool in the window to see the effect - it shows a white overlay.
Clicking the preview button doesn't show up any difference.I have saved several files as tests but the moire remains unaltered.
I have drawn a closed shape resembling a circle. I want to fill its interior with the Gradient Tool. But it fills the WHOLE layer. How can I make it only fill the needed area?
View 6 Replies View RelatedIm testing out some tutorials since im kinda new to web graphics.
In photoshop i want to place a gradient with white as foreground and transparent as background, but HOW do i make the background transparent??
I use the pen tool but idk how to add a gradient in it...
View 2 Replies View RelatedPS7. I have a very old pic thats overexposed on the bottom and too dark at the top. I tried curves but couldn't get it very good. So i want to try using the gradient tool and set it to darken the lighten as it travels from bottom to top. how to adjust it so that the darkening begins to change to the proper degree?
View 9 Replies View RelatedIn photoshop CS5, Brush tool doesn't work on an adjustment layer
View 16 Replies View RelatedJust recently upgraded from Photoshop CS5.5 64bit to Photoshop CS6 64 bit. Crashes when using burn tool, crop tool, or dodge tool?
View 2 Replies View RelatedHow do I get gradient tool to work? I selected gradient icon, orange blue orange, angle gradient, Normal Mode. I click, draw a line on a new layer and nothing happens.
View 3 Replies View RelatedHaving trouble with the gradient tool in CS6 Using Windows 7. I select the gradient I want to use, but nothing shows up in the preview box. Doesn't matter what gradient I select. Tried applying the gradient anyway, and it does show up, but is very faint and hardly noticeable.
View 5 Replies View RelatedCan I type something while using the gradient tool? Not typing something and then filling it with gradient tool effect but straight typing using the gradient tool (like chrome type). I use Photoshop 7.
View 2 Replies View RelatedI am beginner of photoshop. I would like to ask how to create the effect such a ball with gradient fill. There is a shiny glow on the left of the top. It relate with the water droplet tutorial in this web site?
View 4 Replies View Related1. I'm trying to fill a shape on my image with a gradient effect. I can use the paintbucket tool to fill in a regular solid colour, but when I try and use the gradient tool it fills the entire window with a gradient. How can I fill a particular part of the image with a gradient (it's also not really possible to use the marquee tool).
2. My image has some 'broken' shapes that floods out the whole image when I use the paintbucket fill. Is there a setting so that small gaps can be ignored and therefore no bleeding occurs (such as there is in Flash MX)?
I'm new but I have fallen in love with photoshop. I only have one issue I cannot seem to clear up... can I use more than two color's with the gradient tool? (fore and backgroud) If so, how?
View 6 Replies View RelatedI bet I've messed with some setting somewhere and forgot to change it back, but I can't for the life of me fix this problem.
It would be best if I don't have to add a blur to the gradient to get it to look right,
The Pen Tool is my favorite / go to selection tool. But can it do the following...I've made a path and converted it to a selection, then filled the area with a color or texture (on it's own layer).
Now I find that I need to adjust (fine tune) the shape I've created / filled with color or texture to better fit how / where it's being used. Is is possible to invoke the path handles and get it to adjust the filled area as you move / adjust the path. (This is not a shape, not using the shape tool.)
I can select the filled path / layer and free transform but that does not give me a fine enough adjustment.Puppet Warp doesn't really fit the bill eitherA good example of what I want to achieve is similar to when you put type on a path. When you adjust the path the type moves to conform to the changes in the path. I want to do the same thing with the area I filled using the path.
this worked until yesterday. I didn't install any software on the pc or change any settings that I can think of. I'm using photoshop cs2. I've rebooted the computer several times and I've quit/restarted photoshop several times.
when I create an adjustment layer, I cannot paint black in the mask area. I can fill with black and paint white. if, after filling black and painting white, I press D (to swap foreground/background colors), I can paint, a paintbrush thing shows up in the history, but it won't change. if I press D again, and paint some more white, it shows up in white. likewise, if I choose black another way (eyedropper, setting rgb to 0,0,0), it behaves the same. likewise, if I don't start out by filling black, and I just try to paint black on the white mask, it behaves the same (doesn't work).
if I create a new layer, I can paint black on it. If I switch to the pencil tool rather than the brush tool, I can pencil black into my adjustment layer masks.
any suggestions?
or what info can I get for you so you have a good place to start?
I am fairly new to Lightroom, and the Adjustment Brush tool specifically, and I am having some problems with it! I have watched tons of tutorials on using it, and it seems relatively easy...although when I go into my program and attempt to use it, nothing happens to my photo...say if I wanted to adjust the exposure on the face of an individual, I will go in and select the tool, decrease the exposure, make the brush and feather the size I want it, and when I go to "paint" the area I want altered, nothing happens? The pins appear as if to show me that's where I started, but then no change happens to the area I attempted to paint. Do I need to select something somewhere to be able to actually use the brush to paint?
View 3 Replies View RelatedFor a while now I've been struggling to understand why my Gradient Tool is like this? I don't recall making any changes to it in the past and now it's stuck like this. I've searched high and low online for answers but I've been unsuccessful so far.
View 6 Replies View RelatedI have an old document from an installation that no longer exists.It has a background gradiant created using the gradient tool and I clearly modified that and in all probability saved it as a preset.
However I now need to edit it, how do you edit gradiants created using the tool? Or should I have used a mask and blending to retain editability.
I have a layer and I want it to fade to transparent (using the gradient tool?). Last time I did this, I used masks of some type, but forgot to make notes on what I did... Can someone point me in the right direction?
View 2 Replies View RelatedI'm using the gradient tool and want the foreground & background colours used as the gradient fill. (I've read in many manuals that the foreground & backgound colors are the default colours when using the Gradient tool) When I use it, it automatically uses one of the preset colours and I can't figure out how to use the two colours I've chosen.
View 3 Replies View RelatedWhen I use the gradient tool it has visible transition lines even though I am using the colour to transparency option. When I say visible I do not mean hard edged transition, but the transition is visible on the screen and when printing.
Is this inevitible or am I missing a trick to getting a barely visible transition edge?
I keep getting the following error message in Gimp:
Calling error for procedure 'gimp-image-set-resolution': Procedure 'gimp-image-set-resolution' has been called with value '-1.#IND00' for argument 'yresolution' (#3, type gdouble). This value is out of range.
then the picture closes!
PSP is and has always been THE best graphics app with a truly intuitive interface and useful set of features & tools.
I have been using it for many, many years... sniffed around other products, but always returned, fully satisfied with what I can achieve. I've also written a suite of scripts to further enhance my use of it alongside my photography hobby.
HOWEVER... since Corel took it over and the start of the X series, there has been a serious and very annoying omission concerning the Crop tool. Previous versions up to v9 allowed the user to grab hold of the edges of the crop box ANYWHERE along ANY side, and drag/extend/reduce the size of the box. This allowed us photographers to zoom in to pixel level and grab any part of the visible box to adjust the crop dimensions very accurately. This is a very important feature for photographers.
The new X interface has changed the crop box to 'vector node handles' only for adjustment, which are not always visible when zoomed in. This means that instead of being able to align the box accurately to an image feature or row of pixels, you have to zoom out until you can find the nearest handle to use, or scroll up/down left/right, which either takes you away from the area you want to work on, or zoom too far out to see the detail you want for alignment.
option/preference to ditch the vector handles and grab the sides as before. I know you may think it a backward step, but you've taken away the very function that photographers need for cropping a composition, which is available in other products.
LR 5.0 with ACR 8.1
Macbook Pro w/Retina (mid-2012)
OS X 10.8.4
2.7GHz Intel Core i7
16GB 1600MHz DDR3 RAM
In HSL, the Targeted Adjustment Tool (TAT) works only intermittently. Sometimes it does not move the sliders at all, sometimes only a little, sometimes it works normally. Problem persists even after LR restart and exists both with Apple Magic Mouse and Wacom Pen/Tablet as input devices.
This was an issue with some RCs from previous versions.
I updated to LR 4.3, ACR 7.3, and CS6 11.0.3 yesterday even though I'm not on a Retina MBP.
Anyway, last night I was doing some edits. Opened LR catalog, edited a RAW in PS, saved the PSD which kicked back to LR. Did some final touch up using the Soften Skin adjustment tool and when I clicked on an area of the photo to make the brush stroke, LR would crash. It did it several times in a row and I finally got it to stop by clicking on the brush tool, clicking done, then reclicking the brush tool. I have LR automatically sending bug reports on crashes.