Photoshop :: Pen Tool - Filled Path / Layer And Transform But Does Not Give Enough Adjustment?
Mar 23, 2012
The Pen Tool is my favorite / go to selection tool. But can it do the following...I've made a path and converted it to a selection, then filled the area with a color or texture (on it's own layer).
Now I find that I need to adjust (fine tune) the shape I've created / filled with color or texture to better fit how / where it's being used. Is is possible to invoke the path handles and get it to adjust the filled area as you move / adjust the path. (This is not a shape, not using the shape tool.)
I can select the filled path / layer and free transform but that does not give me a fine enough adjustment.Puppet Warp doesn't really fit the bill eitherA good example of what I want to achieve is similar to when you put type on a path. When you adjust the path the type moves to conform to the changes in the path. I want to do the same thing with the area I filled using the path.
I would really like to know if there is any way I can manage to to transform both a layer object and a path at the same time....or if there is any workaround to achieve this. Â In a nutshell, say for example I spend a VERY long time creating an intricate path around a very detailed object, and then at the very end notice just how crooked and out of perspective it is, and would like to straighten it.
Of course I could transform and correct the object, and then carefully transform the path - but it just won't be exact, and I will have to spend a long time adjusting the path and making SURE it is perfect. Â Isn't there any way I could get to transform them together? Â Usually of course I do all the correction to straighten and correct perspective beforehand, but in some instances after I am done creating the path I then notice that the image could have used further adjustments.
Using transform tool to rotate, often gradients do not rotate. In the example below only the "w" gradient did. Good news is the rotate tool works fine.  Appears this has something to do with compound paths, as this normally does not happen on a new single path. Releasing the compound also rotates the gradient unexpectedly.
I've created a curved path and am having probs creating an even line using the Stroke Path tool. For some reason, the line gest heavier in places and I just want an even smooth thin line. I've tried using the brush and the pencil tools... screengrabs below. Would really appreciate any advice. Thanks! Mo The path: Stroke with the brush tool Stroke with the pencil tool: My brush settings:
I have this path that I got from Shutterstock. No matter what I do with it, it's got this green fill on it. So if I apply a grey fill to it, the grey fill is put on top of the green. If I remove the fill completely, the green fill is still there. Â Â Maybe the person who made it applied some kind of magical unremovable fill color to it or someting? Â I've ungrouped it, checked that there's no effects in the appearance panel, and of course checked that there's no outline on the path. I've also tried releasing compund paths. There's no opacity mask or transparency modes. Nothing worked.
I know paths are vector information, so I assume they can be transformed, enlarged for example, without losing sharpness. How to transform a path. I have a path that was created on a small image that I want to use in a large image. I have dragged the path from the small image to the large one, but I need to resize it.
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
I have noticed a few subtle UI changes in PShop CC -some of which seem like bugs.When I apply "transform" to a newly created Elipse path (which has been pre-specified as a path), I get this prompt: Â "This operation will turn a live shape into a regular path. Continue?" Â But the elipse I have created is NOT a shape. The Path option has already been selected. Yes, this is a very minor quibble, but as a former beta (and alpha) tester, I tend to be compulsively thorough! OTOH, perhaps there is a user error on my part. I did double check that new paths created with elipse tool are spec'd as "paths".
What I want to do is to have an adjustment layer that is a reversed, black and white image. I initially thought to merge B&W and reverse adjustment layers, but read that an adjustment layer may not be the target of a merge. Is the way to accomplish this to fiddle with the B&W adjustment layer sliders somehow?  I like how the black and white displayed image of a given color channel looks, how can I export that channel into a layer?
I use a lot of adjustment layers and they're often applied to the previous layer. Is there a keyboard shortcut to automatically "Use pervious layer as clipping mask" without going through the dialogue box or manually applying in the layers palette(Option-click between layers)?
I can't seem to use the adjustment tools in RAW editing of JPEG's. An error message comes up.."Unable to create local adjustments. All the local adjustment controls are set to have no effect on the image". These are tools I have been using regularly and all other tools work. I have shut off my MAC and rebooted but still get this message. How can I reenable these adjustment tools??
When using the brush tool (and others) in Elements, I am finding that when I paint only the center of the curser is filled with color. How do I adjust the brush and or curser to fill the entire area right up to the edge of the selection? I recently upgraded from Elements 10 to 12.
When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
I'm familiar with adjustment layers and clipping masks, but am wondering if there's a way to have an adjustment layer affect a group of layers below it, but not all of them. (Usually you have a choice of having it affect either JUST the layer beneath it (through a clipping mask), or ALL of the layers beneath it.
When you open an image with adjustment layers, what determines what is selected, the background or the adjustment layer? It seems sometimes it's one or the other, and I don't know the logic. Personally I would prefer that the image always opens with the background layer selected.
I have this north arrow that is not working in a clients drawing. Look at this drawing with the block in it and determine why the arrow head is filled in the block editor but not filled in the drawing (model space)???
Long time gimp user, but for basic tasks only. Now I would like to get my hands dirty a little more. I'm trying to setup a workflow that involves CAD, Inkscape and GIMP. Basically I did some architectural drawing in CAD, used Inkscape to clean up and convert DXG into SVG, so that I can use paths into GIMP. I did a script that for every path creates a new transparent layer with a layer mask using the path, so I can add fills and textures quickly. Now to the problem: say I want to add a texture from another image, i paste the image into the appropriate layer, then I want to transform the texture a bit (scale, rotate and perspective). the result is that the layer mask is transformed, too. I tried to disable the mask during transform, but didn't work.
Is there a way to workaround this? maybe some layer mode instead of layer mask?
GIMP 2.8.6 on Window 8.I used Canvas Size to add a horizontal space at the bottom of a jpeg photo. (I want to use it for a text caption for the photo.) The new space is filled with a checkerboard of small light & dark grey squares.
I used the Rectangle Select Tool to select the new space.I clicked on the Bucket Fill Tool and moved the mouse over the new space. The mouse pointer includes a circle with a diagonal stroke through it, indicating I cannot fill the selected area.
I'm new to Paint shop. Is it possible to clip an adjustment layer or image to just the layer below it like in Photoshop? Or maybe Paint shop calls it something else?
I would like to know if there is a way I can transform a layer by manipulating the layer itself.
For instance, I can select Layer-->Transform-->ArbitraryRotation, and then use the mouse directly on the layer, giving me a "realtime" vies of the rotation.
Is there any way to do this with something like the "Scale Layer" function, so I could transform a layer directly, while seeing in realtime the difference the scaling makes?
I'm working in Photoshop CS5. I have several layers, and only want to make an adjustment to the top layer. I don't have an clip icon on the bottom of the layers pallete either, what should I do...
In CS5 if I choose the either the Transform or Free Transform tools (having created a new layer for the image) I get an error message saying ‘could not transform because the initial bounding rectangle is empty’.
I’ve used the Transform tool successfully in the past and have checked through the Adobe instructions carefully (there isn’t much to them really) and I cannot see what’s wrong.
I've unlinked the layer mask from the shape layer, and made sure the layer mask thumbnail is selected in the layers palette. Â If I do a cmd-t on OSX to transform, Photoshop (CS6) selects the shape layer path to transform instead of the mask layer, even though the mask thumbnail is still selected and even if I have a marque selection.Is this a bug?