I know paths are vector information, so I assume they can be transformed, enlarged for example, without losing sharpness. How to transform a path. I have a path that was created on a small image that I want to use in a large image. I have dragged the path from the small image to the large one, but I need to resize it.
View 4 RepliesI have noticed a few subtle UI changes in PShop CC -some of which seem like bugs.When I apply "transform" to a newly created Elipse path (which has been pre-specified as a path), I get this prompt:
"This operation will turn a live shape into a regular path. Continue?"
But the elipse I have created is NOT a shape. The Path option has already been selected. Yes, this is a very minor quibble, but as a former beta (and alpha) tester, I tend to be compulsively thorough! OTOH, perhaps there is a user error on my part. I did double check that new paths created with elipse tool are spec'd as "paths".
I would really like to know if there is any way I can manage to to transform both a layer object and a path at the same time....or if there is any workaround to achieve this.
In a nutshell, say for example I spend a VERY long time creating an intricate path around a very detailed object, and then at the very end notice just how crooked and out of perspective it is, and would like to straighten it.
Of course I could transform and correct the object, and then carefully transform the path - but it just won't be exact, and I will have to spend a long time adjusting the path and making SURE it is perfect.
Isn't there any way I could get to transform them together?
Usually of course I do all the correction to straighten and correct perspective beforehand, but in some instances after I am done creating the path I then notice that the image could have used further adjustments.
The Pen Tool is my favorite / go to selection tool. But can it do the following...I've made a path and converted it to a selection, then filled the area with a color or texture (on it's own layer).
Now I find that I need to adjust (fine tune) the shape I've created / filled with color or texture to better fit how / where it's being used. Is is possible to invoke the path handles and get it to adjust the filled area as you move / adjust the path. (This is not a shape, not using the shape tool.)
I can select the filled path / layer and free transform but that does not give me a fine enough adjustment.Puppet Warp doesn't really fit the bill eitherA good example of what I want to achieve is similar to when you put type on a path. When you adjust the path the type moves to conform to the changes in the path. I want to do the same thing with the area I filled using the path.
Using transform tool to rotate, often gradients do not rotate. In the example below only the "w" gradient did. Good news is the rotate tool works fine.
Appears this has something to do with compound paths, as this normally does not happen on a new single path. Releasing the compound also rotates the gradient unexpectedly.
Ps CS6
OSX 10.6.8
Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
I mean a Transform, including Free Transform, as found in the Edit menu. A simple move by the Move Tool is OK.
A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.
When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedI'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View RelatedI'm trying about 8 hours to convert a Photoshop shape in to a working path in order to put a brush border around it. I don't understand why the "stroke path with brush" is grayed out and not usable directly on the shape path itself.
"Load path from selection" is not an option because it deforms my path.
I want to be able to transpose the perspective of the existing image to my new 3D prism shape.Why can't I create a path.. and then drag nodes on that path.. and warp the pixels at the same time???
It shouldn't apply to just 3d.. because I should be able to draw a rigid path around anything and warp / stretch the image from those points.
Having made a (ex circular) closed path within a (ex square) path, I want to turn this into a selection in which the inner circle is omitted from the selection. But when choosing "Make Selection", only the first option,"New Selection" is available, the other three are grey (Add to, Subtract from and Intersect).
This used to work in CS7,
I'm wasting time having to place my image in Illustrator then manually line up the clipping path. You used to be able to save a file with a clipping path as an EPS in photoshop, select "retain vector data", place in illustrator and hit cmd Y to see the clipping path. I need the image and the clipping path in Illustrator and the image is too complex to create a mask in Illustrator. I tried to save it as an EPS but "retain vector data" is grayed out.
View 2 Replies View RelatedI have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedI have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedI have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
Actually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
I have a bunch of material libraries that need to be re-pathed as I have moved my textures, the Bitmap/Photometric paths editor has a tickbox that says "include material library" which leads me to believe that it will list, for re-pathing, all materials in my library.
However, it doesn't seem to do anything for me even though the library i need to re-path is loaded into my Material/map browser.
I am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database;
using (Transaction Trans = db.TransactionManager.StartTransaction()) {
BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true);
db.ResolveXrefs(false, false);
[Code] ...........
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedI accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedWhy the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?
View 2 Replies View RelatedI've got two paths. They don't intersect, exactly, a straight path ends at a curved path, but I need the end of the straight path to be curved, to make it look like the two meet perfectly. The two gray paths (a single path, then path->offset for the second) are the outside of a shield shape. The two black lines (paths) just surround text, but currently they overlap the gray paths.
View 2 Replies View RelatedIs there any function or script that auto-adjust tracking so text on a path meets the exact end of the path/bracket?
View 4 Replies View RelatedOnce you've used a path to put type on, how do you get the path back? Everything I do to recover the path deletes it.
View 2 Replies View RelatedThe problem is that it's only loading the outline of my path as the selection. All the inner areas aren't included, and I want to chop them out as well
View 26 Replies View RelatedWhen i creates a new path with Shift+Click by path tool no new path created in path dialog.Why?
View 3 Replies View RelatedI'm need to get the stripes to bend like in the photo. I tried it once with skew transformation, using it couple of times, step by step, but it did not look that smooth.
So is there a way I can do it? I have no clue how, if at all, it can be done.
Currently testing Photoshop CS (for MacOSX) and i've knowticed that the 3D transform filter has been removed. Does anyone have any clue where i can get it from; other than the CD.
View 3 Replies View RelatedI have photoshop 10.0 and I did not get any 3d transform with it or on the disc. Can any one supply me with a download of it..
View 4 Replies View Related