Photoshop :: CS4 Install Failure
Nov 21, 2008
CS4 just won't install. I get the fatal exception blue screen once it begins installing the Adobe Media Player. The error, once Windows (Vista 32-bit), reboots says the following:
------------------------------------
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 1033
Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: AA546703
BCP3: C2303C70
BCP4: 00000000
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:WindowsMinidumpMini112108-04.dmp
C:UsersPaulaAppDataLocalTempWER-53367-0.sysdata.xml
C:UsersPaulaAppDataLocalTempWER5781.tmp.version.txt
------------------------------------
I have CS2 and CS3 still installed. I installed it as Administrator, per the instructions, but it didn't seem to matter. I do everything as the Admin anyways. I looked for those 3 files mentioned in the error, but they are nowhere to be found and I have system files visible. I've not called tech support yet, hoping to avoid that. If this looks familiar to anyone, I'm listening very intently! :) Here are two links with snaps of the install window and the fatal exception window, which is a bit blurred,
View 3 Replies
ADVERTISEMENT
Nov 21, 2013
I purchased a CC membership several weeks ago and immediately loaded LR on my master machine and becajuse of a heavy pre-trip workload postponed installing Photoshop CC until i got back. I am trying to download it now and keep getting an error that says that Safari can't open the specified address because OS-X does not recognize Internet addresses beginning with "aam:". This machine is running OS-x 10.7.5. At the time I purchased the CC membership, I downloaded both LR & PS on my laptop (OS-X 10.9) without difficulty.
View 3 Replies
View Related
Jul 5, 2013
I've been using Photoshop since 1998 but my HDD recently suffered a complete failure and I've had to change the drive. Unfortunately, I don't have my original Photoshop disk, only a CS2 and CS5 upgrade disk (with both serial numbers).
View 3 Replies
View Related
Mar 14, 2013
I have CS2 Premium which I'm running on an older PowerPC Mac (G5 - Dual 2.3 GHz ) running OS 10.4.11. I've had this setup for many many years (registered/activated with Adobe) but suddenly one day I could no longer launch my Photoshop app: when I clicked on the Pshop icon it would start the launch (open) procedure ... and then almost instantly it would quit (in just a few seconds ... before the application even got to the 'title/credit' screen).
I've recently tried uninstalling CS2 (everything except Acrobat) and I ended up doing a manual uninstall of Version Cue. I've been on Macs for 20+ years so figured this would be a pretty straightforward procedure - uninstall -> reinstall and then back to work. Nope.
I'm attempting a fresh installation direct from the original CS2 CDs. In any event, when I try to (re)install CS2 - and after going through the standard screens with Adobe's usage terms agreement and installation hard disk selection - I arrive at the screen where one selects which application(s) to install by checking the various boxes (or alternately, to install the entire suite) but the 'Adobe Photoshop CS2/Adobe ImageReady CS2' line and checkbox are grayed out, so it will not allow me to check them and continue with the Photoshop installation process.
View 13 Replies
View Related
May 28, 2012
Trying to install CS6 upgrade in Win 7 64bit system. Seemingly installs to point of Setup. It accepts serial # and then gets to installing MSFT Visual C++. The estimated time steadily increases to >5hrs! but makes no progress. I uninstalled CS6 and tried reinstalling but had same problem I assume this is a bug? My browser is IE9 and DSL.
View 3 Replies
View Related
May 7, 2008
I had one of 3 Transcend 1G cards result in complete failure, loosing about 400 pictures of Costa Rica birds. Neither the camera nor computer would recognize card after the shoot. Disk Doctors disassembled the card and hooked it up to test modules and ran multiple 5-6 hour tests to try to reconstruct data. Nothing worked as they said all the files were corrupted. This is the one disk that I shot until full with a Nikon D40X camera. Card was formated before use. I reviewed pictures as I shot and all seemed right.
They theorize that perhaps the card and camera did not communicate, but I shot at most only a couple of RAW format pictures over the capacity, so to me that does not seem logical it would corrupt everything. But not an expert either.
The technician said not to fill up the card and use smaller cards so you don't have all the shots in the same basket.
View 9 Replies
View Related
Feb 27, 2009
I am trying to install the 11.0.1 update, and all I get is a generic error "The Update Failed" with no details and no log entry. I have AV off, plenty of disk space, applications are closed, and all the other basics checked. Whether I download the update directly or use adobe updater, no go.
I'm using Vista 64-bit.
View 20 Replies
View Related
Mar 12, 2014
How do I re-install AI CC after it's been uninstalled because the initial install was corrupt? AI isn't availbale for download again in the app section of CC.
View 1 Replies
View Related
Sep 17, 2013
I'm trying to install Adobe Photoshop CS5 on my laptop and every time, after installing the product and entering the serial number, the process fails and tells me 'We are unable to start your subscription for Adobe Photoshop CS5 Subscription Edition.'
It then asks me to relaunch the product and do the installation process again. I have tried this numerous times and it keeps saying the same thing.
View 2 Replies
View Related
May 24, 2012
Windows 7 OS, On a new laptop I loaded my trusty Creative Suite2, it failed to open, after I ran as administrator and manually entered the folder location C:progra~2adobe, CS2 loaded and runs fine. I now want to install Photoshop CS3 and I get a very early error message indicating Minimum Requirements not met...Windows XP SP1 and greater and Windows Vista, it then dumps me out.
View 3 Replies
View Related
Dec 16, 2012
I have been using PS Elements 6 for some time with almost no problems.Now however when I try to Burn a video cd from a slide show, which I have done many times before, it fails after making the wmv file.
View 1 Replies
View Related
Apr 11, 2009
I have found a problem with CS4. After reinstal it doesn´t run and a window with AMT subsystem failure open. I tried remove it and reinstal it. Doesnt work and de instalation program show problems.
View 1 Replies
View Related
Oct 25, 2008
I have Photoshop CS. I just upgraded my computer from Windows XP to Windows Vista - 64 bit. I reinstalled Photoshop CS and it worked perfectly on the new computer. I then ran the Windows Vista Easy Transfer program to transfer my files and settings from my old XP computer to my new Vista computer. Now when I start Photoshop on my new computer, I get an error message that says -
"The application has failed to start because NkNEFPlugin.dll was not found. Re-installing the application may fix the issue."
I reinstalled Photoshop CS on my new computer, but continue to get the error message. When I click the "OK" button at the error message, Photoshop appears to continue loading and seems to run and operate properly.
View 3 Replies
View Related
Apr 30, 2013
I try using the clone stamp but selection fails with this error message:Could not use the clone stamp because the area to clone has not been defined (Alt-click to define source point).
When I press Alt, I see the characteristic selection bullseye. But, afterwards, a right-click of the mouse reveals an open circle and the error message.I note that the key works for menu selections (e.g., Alt-File) and other actions.I have closed PS and re-opened. Reset the clone stamp tool, closed and reopened, etc., to no avail.
View 8 Replies
View Related
Mar 29, 2013
When using CS6 64 bit I noticed that when I overlayed text to change color by clicking on the color swatch at top right panel ..I got a program failure notice....It works in 32bit version however.
The same thing happens when overlay in enabled and I go to forground color in tool bar click and try and change color via swatches?
View 2 Replies
View Related
Mar 24, 2012
I'm currently working on a information page for my school. I spend many many hours creating it.After I saved and closed it today, I started my backup sync software called "Sync n Go" to save the file on my PC as well and not only on my portable flash drive.After I did so I got an idea and decided to open it again but I wasn't able to. Photoshop shows me a error message that says that Photoshop can't execute this psd because a program failure occured. (Image attached but on german)
My question is, if there's any way to restore this file?
View 4 Replies
View Related
Mar 2, 2005
I've just had a power cut and lost 1+ hour of work in photoshop, two cd covers.
is there any way that i can get it back?
View 8 Replies
View Related
Mar 6, 2014
I have PSE 12, I am receiving the error message
"Online service encountered an error Error7. An XML parse failure occurred."
View 14 Replies
View Related
Nov 12, 2012
My Photoshop 8 won't load the organizer. (It will load the editor) It does this from time to time and usually, in a few days it works again. I have called adobe support in the past about this but they don't believe me. This time a week has gone by and I still can't get the organizer to open. So, I tried re-installing it from the disk. It uninstalled it and now, won't re-install it. I let my back up expire (as every few months I have to call adobe to get re-connected to it). Is adobe now blocking my installation? The installation gets to verifing and then deletes the files it just installed.
View 1 Replies
View Related
Feb 19, 2013
Photos sent in PSE 10.0 via share in Windows Vista system go to a secondary site which does not allow the photos to go forward via Send or Forward. Used to Work. Imap.aol.com account gives error messages as follows: socket error 10013 and error Ox800cccOE. How can I change the account address or get the thing to work properly?
View 2 Replies
View Related
Aug 29, 2013
I cannot print photographic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem. The problem persists even if I try using a cabled connection rather than WiFi. I have ensured latest software from Epson has been downloaded. This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
rather than just a workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
View 7 Replies
View Related
Jan 31, 2013
I got an update notice from Adobe for Extention Manager 6.05. When I run the update, it downloads okay, but then I get an Installation Failure Error Code U44M1P7. I'm using Photoshop CS 6 standard.
View 1 Replies
View Related
Jun 7, 2013
Last night, I downloaded an update for Photoshop CS6, Windows 8, 64 bit. The update failed, and I can't get PS to run at all.How can I restore my program?
View 7 Replies
View Related
Feb 26, 2012
i open an image to photoshop cs5 and it opens as a background layer, right?now i drag n drop from windows exporer the same image over the cs5 on top opening as a new layer.It shows up an X over the image where you can reposition the second image (layer) over the first.
i don't want to reposition, its the same image, i want the pixels of the second layer to match EXACTLY the first layer.i press the TICK button or ENTER where the new layer gets the images name BUT when i zoom in 1600% or 3200% and move to the edge i see the edges of the new layer not positioned exactly over the 1st layer.
it positions the new layer 1 or 2 pixels to the right and some times 1 or 2 pixels to the bottom. it doesn't snap the edge.know i can fix it afterwards by align the layers from the layer -> align menu but its annoying, even creating an action..
is there a setting in the prefrences which i'm missing? is it a bug? if so, can this be fixed in CS6?
View 17 Replies
View Related
Sep 15, 2013
PS CC update ended with Update Failed. Now cannot start PS CC. POPup says could not complete your request the internal signature is incorrect.
View 3 Replies
View Related
Feb 7, 2013
I've been designing for 3 days. A very important design but power cut in the apartment. I tried to recover the file. I've failed.
Should I save a picture? I look on the picture and can draw. I using Adobe Photoshop CS5.
View 2 Replies
View Related
Mar 31, 2013
when attempting to print images from elements 11 from the organisor to my cannon 4900 printer the print dialogue failes to create a preview image and then automatically closes the application. seems to happen when i try and print an image that i have printed previously.
View 1 Replies
View Related
May 25, 2012
The blur gallery in photoshop CS6 has stopped functioning properly. When you activate one of the blur filters in the gallery the window changes to the gallery interface but the cursor remains as whichever tool was previously selected. Any thoughts on how to rectify this. It was working ok so I am assuming it was affected by an update but I've been wrong before. Is there any way to view and uninstall updates?
View 7 Replies
View Related
Jul 14, 2013
My program refuses to start and reports failure 150:30 - get support from adobe
View 1 Replies
View Related
Dec 22, 2013
When trying to print borderless the menu reverts to the smaller size. ie when selecting 5x7 it reverts to 4x6. Ditto 8x10 and 11x14 etc. The paper size stays the same, just the print size reverts and the desired size disappears. I contacted Epson twice and both times I was told it is a software issue, not the printer. The same thing happens in Lightroom, but in WEindows Gallery Live the printer works correctly which indicates the driver and printer are working correctly. I am using Windows 7 and had Elements 9, but Elements 10 came bundled with the printer so I upgraded to 10, no improvement.
View 5 Replies
View Related
Mar 17, 2014
I've just installed elements 12 and have added names to people, and added some keytags. Is there a way to save this information so when I back it up to a portable hard drive I have all the keytags and such if needed for putting on a new computer if for example the hard drive crashes and I lose everything.
View 6 Replies
View Related
