Photoshop :: CS4 Graphics Accelerator Works, But...
Oct 26, 2008
I'm using CS4 with a Dell XPS 1710 notebook.
In preferences, performance, I set "enable OpenGL Drawing". It listed my graphics card "Nvidia Corporation GEForce 7900 GTX/PCI/SSE2"
I tried the rotation and zooming features and they worked well.
As soon as I tried to apply a filter, such as 'filter gallery' or liquify, no preview image shows in the filter screen. It is just white. The controls work, showing I am zooming in, but no image"
View 2 Replies
ADVERTISEMENT
Jun 3, 2011
I bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
View 9 Replies
View Related
Mar 31, 2011
Does the following macro works with symbols of Coreldraw X5? I mean the symbols/clone feature, where you can duplicate same objects and when you change one automatically the others changes as well. But this is not the traditional clone option of corel draw. URL.....
View 2 Replies
View Related
Mar 14, 2012
When I copy and paste a pdf document into Corel Draw, it seems as the default size of the pasted object reflects anywhere from 23" (left to right) & 17" (top to bottom) = 23"x17". After selecting the object, & entering an object size of 8" x 11", the document then resizes to 2"x3". So, then I always have to enter the 8"x11" again for it to finally accept that size - which it always does, but on the 2nd time trying.
View 15 Replies
View Related
Oct 23, 2013
I am using version 2014 and all the tabs under "Design" are greyed out. I am trying to use the "Insert Frame" function.
Note: Windows 64bit. Recently upgrade from 2013.
Similar problem Here: [URL]....
View 7 Replies
View Related
Sep 23, 2013
How to configure the schedule synchronization between Host and Accelerator of Revit Server 2013
View 2 Replies
View Related
Aug 19, 2013
I am having a problem with the design accelerator in 2014. The tab is there, but I cannot click any of the buttons to actually insert a frame or design some gears. They are all grayed out. The design Accelerator appears to be loaded in the add-ins screen. I am running Win 7 64 bit.
View 4 Replies
View Related
Sep 14, 2013
Design accelerator does not generate sprockets for chain? I would like to know why.
View 7 Replies
View Related
Jan 17, 2013
Roller Chain accelerator give fault value? For example, I have a basic chain setup with 180SP40 and 180SP15 (both are existing sprockets). After choosing the correct chain style from the table and start choosing the existing sprockets (OD of the tooth), tt gave me a fault output and recognize the 180SP40 as a 42 tooth sprocket and 180SP15 as a 17 tooth sprocket
View 1 Replies
View Related
Jul 4, 2013
I'm customizing templates inventor.I need to know how to customize the template using DA for the design of the shafts.
View 1 Replies
View Related
Jun 7, 2013
Is there a way I can add hpt belts to the design accelerator? I'm using inventor 2013 and I want to use 8m belts without having to find the models of each pulley and individually add them.
View 1 Replies
View Related
Nov 15, 2012
I am working on a gearbox design that requires multiple iterations on the shaft dimensins and other parts, so linking the dimiensinos to a spreadsheet would make this easier. However, I'm using the design accelerator for the shaft and other components and I cannot find any information on how to connect the dimensions I enter in that design accelerator to a speadsheet.
I know how to link to a spreadsheet for a regular component, but haven't used that much.
View 3 Replies
View Related
Nov 8, 2013
I am having a problem while making 2 straight spur gears. The purpose is to connect the crankshaft with the camshaft. Center distance is fixed: 85,5mm. I would like a ratio of 0,5 with 22 and 44 teeth. My gears seem to hit each other. Please find the attached pictures below for a detail and my inputs.
View 3 Replies
View Related
Feb 3, 2013
When I import an Inventor model to Showcase, bolted connections are missing the bolt. I get the washers and nuts but the bolt is gone. I can overcome this by saving the bolt part in a project folder but this is time consuming.
Are there some settings I am missing or is it just another item to add to the fixit list?
View 1 Replies
View Related
Nov 29, 2011
If there is a way to create multiple instances of bolted connections using design accelerator instead of having to add one by one which takes forever ? All the bolted connections are of the same specification.
View 2 Replies
View Related
Feb 21, 2013
Except for the minor/temporary glitch back in 2009, we have had very good luck with Riverbed/Steelhead devices for accelerating DWG file access over a MPLS WAN connection.
When accessing Sheetset (DST) files on a remote server across the WAN, a DBL file appears alongside the DST and from that point on, the remote user has excluside R/W access to the DST file which prevents any other user from accessing the sheet set concurrently.
On the LAN that is local to the server, this problem never exists until the DST file is accessed in any of several remote locations.
View 4 Replies
View Related
Sep 28, 2006
Everytime I try to place a #8 machine screw type II screw from the content center I get a Design Accelerator Doctor error saying: "Modeling: Failed to insert a part into assembly!".
But if I place a Type I machine screw it works fine. Also if I replace the Type I screw with the Type II (the one I have a problem with) it replaces it no problem. So basically if I want to place a #8 Type II screw I have to place a Type I and then replace it with the Type II..
View 8 Replies
View Related
Apr 28, 2013
I've got a strange situation regarding the bolted connection generator. For some background, I made another post a while back about editing the hole sizes for Flat Head Cap Screws so that the heads were below flush. That thread is here:
[URL]
Basically, I increased the countersink diameters Clearance.xls and then found that the Design Accelerator doesn't use that spreadsheet for its data source. More research led me to this file:
C:UsersPublicDocumentsAutodeskInventor 2013Design DataDesign AcceleratorTablesHolesAnsi Unified Screw Threads.xml
So I edited the diameters in this file and tested the design accelerator and everything was great. [I kept a backup of the original...]
Since then, another thing that has bothered me was counterbore numbers for socket head cap screws. The Cbore diameters don't match the tools that we have and the depths are always right on size. i.e. for a 1/4" SHCS, the bore is 7/16" diam x 0.250" deep. In reality our cbore tools are about 0.406 and we cut them about 0.265 deep to make sure the head is below flush.
I went in to these two XML files and edited them (and kept backups): Ansi Metric M Profile.xml Ansi Unified Screw Threads.xml
Everything seems to be cool, except for one scenario. When I create a counterbored joint for a metric SHCS, the cbore diameter is always 16.00 mm diameter and too deep, regardless of its size. I searched the XML file and what it's doing *does not* match the data in the XML file. I monkeyed around a little more and could not get the counterbores to come out right.
So at that point, I renamed all the files to restore my original backups to the "factory" ones. I assumed that I screwed up the formatting or something in the data table and I'd just try it again. However, even after I restored my backups and removed my edited files, the metric counterbores are messed up.
What I don't understand is that changing the file "Ansi Unified Screw Threads.xml" *did* update the holes for English screw joints. But does the DA pull data for metric joints from somewhere OTHER than "Ansi Metric M Profile.xml"? And if it does use this XML file, why isn't it working? The original data has been restored, but the behavior is not behaving correctly.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 4 Replies
View Related
Aug 22, 2013
I have a problem were when , i take a design accelator shaft to .idw and section it the the hatch lines do not appear as they would if it was a shft drawn from scratch.
View 3 Replies
View Related
Sep 17, 2013
is it possible to produce something like in the attached image using the design accelerator? Instead of making a cylinder and sketching the spline patterns and extruding? To me there must be a way besides sketching and use the library's of standard splines patterns and sizes.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 2 Replies
View Related
Jun 7, 2012
Is there a way of using design accelerator to rivet fix as you would with bolted connection ? I know that by initiating the bolted connection command there is no option to use rivet to complete the connection as is done with bolts. It would be great if rivets from the content centre could be somehow imported into the bolted connection component generator (or readily available) to add like bolted connection or if there are any 'workaround's' to produced similar results ?
View 1 Replies
View Related
May 14, 2013
I've got a strange situation regarding the bolted connection generator. For some background, I made another post a while back about editing the hole sizes for Flat Head Cap Screws so that the heads were below flush. That thread is here:
[URL]......
Basically, I increased the countersink diameters Clearance.xls and then found that the Design Accelerator doesn't use that spreadsheet for its data source. More research led me to this file:
C:UsersPublicDocumentsAutodeskInventor 2013Design DataDesign AcceleratorTablesHolesAnsi Unified Screw Threads.xml
So I edited the diameters in this file and tested the design accelerator and everything was great. [I kept a backup of the original...]
Since then, another thing that has bothered me was counter bore numbers for socket head cap screws. The Cbore diameters don't match the tools that we have and the depths are always right on size. i.e. for a 1/4" SHCS, the bore is 7/16" diam x 0.250" deep. In reality our cbore tools are about 0.406 and we cut them about 0.265 deep to make sure the head is below flush.
No big deal, right? I went in to these two XML files and edited them (and kept backups):
Ansi Metric M Profile.xml
Ansi Unified Screw Threads.xml
The problem ==========>
Everything seems to be cool, except for one scenario. When I create a counter bored joint for a metric SHCS, the cbore diameter is always 16.00 mm diameter and too deep, regardless of its size. I searched the XML file and what it's doing *does not* match the data in the XML file. I monkeyed around a little more and could not get the counterbores to come out right.
So at that point, I renamed all the files to restore my original backups to the "factory" ones. I assumed that I screwed up the formatting or something in the data table and I'd just try it again. However, even after I restored my backups and removed my edited files, the metric counterbores are messed up.
What I don't understand is that changing the file "Ansi Unified Screw Threads.xml" *did* update the holes for English screw joints. But does the DA pull data for metric joints from somewhere OTHER than "Ansi Metric M Profile.xml"? And if it does use this XML file, why isn't it working? The original data has been restored, but the behavior is not behaving correctly.
View 9 Replies
View Related
Nov 13, 2011
I am creating a couple of spur gears using the "Center Distance" design guide. I have fixed each gear to a cylindrical face, but when I click on the "Calculate" button, there is an error saying that the center distance is incorrect.
I went back and edited my sketches so the center distance matched the one displayed in the design accelerator and attempted to calculate again, but the error persists. What am I not getting here?
View 9 Replies
View Related
Sep 26, 2012
Accelerator Keys
My accelerator keys for the right-click object-snap cursor menu do not work. For example, I will be drawing a line and I will bring up the object-snap menu, then I will select ‘E’ for endpoint snap, the ‘e’ will display in the dynamic input window and the snap does not work.
View 2 Replies
View Related
Jul 28, 2013
Oil Paint is suddenly crashing Photoshop CC, even though it worked fine a couple of days ago and works fine on Photoshop CS6.
Error: "The flter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturers website for the latest software."
I'm up to date on all of my software. Working on a Mac Pro, older model, but as I said, Oil Pain filter works fine on Photoshop CS6 and worked yesterday on Photoshop CC, but not today.
View 12 Replies
View Related
Sep 30, 2013
I have a PSD with the size of 344 MB. When I open it with Photoshop CS5, it take 1,38 GB from the RAM.When I do the same with Photoshop CS6, it take 5,26 GB from the RAM.Then CS6 works very slowly and I can forget to do anything with it.
I have a notebook with this technical data:
Intel Core i7 2Ghz8 GB Ram AMD Radeon HD 6850M 4GB1000 GB HDD...The settings for performance of both Photoshop are the same.
View 6 Replies
View Related
Jul 22, 2013
I had 3 updates through the so-called cloud. They were bridge CC, Photoshop CC and an extension mgr update to CS6. After installing the updates Photoshop CC no longer works. It boots up but all selections do nothing. Even closing PS cc won't work.
View 4 Replies
View Related
Apr 28, 2012
All of my photos are 8 bit, but when I open them I get a message at the bottom of the screen reading "exposure works in 32-bit only". When I save these photos as any file type (JPEG, PNG, ect) they seem to export as 32bits/channel. That is to say, that they appear very dark and saturated, exactly how they look in PS if I select the 32bits/channel mode option.I may be getting confused between the 32/64bit versions of PS (i'm using 64bit CS5 at the moment.) But i'm really puzzled as to how I can export my images looking the same as they were when I imported them.
View 1 Replies
View Related
Dec 5, 2008
I need to get a new laptop and I want to be sure to get something that works with CS4. In particular -
the GPU acceleration.
View 12 Replies
View Related
Oct 8, 2012
I'm trying to understand how converting to different color profiles within Photoshop works.
What I'm trying to understand is why, when I have a document saved in with an embedded color profile of "Adobe RGB (1998)", when I *convert* the color profile to "Adobe RGB (1998)" (the same profile) the colors change dramatically. If I am converting to the same color profile, shouldn't the colors remain the same, and not change?
View 19 Replies
View Related
Aug 19, 2012
Sometimes I'm reading a tutorial and they say I should use Alt+Backspace shortcut in order to fill the selection with foreground color. But everytime I try that on a selection a floating dropdown menu appears (options: Restore, Move, Size, Minimize...)
View 6 Replies
View Related
