Photoshop :: CS2 Registry Error

Jun 21, 2008

Cleaning ou tmy registry recently, I discovered that photoshop is leaving entries in the registry for every file I edit. These are "recent" file entires, but instead of deleting any more than ten, it is keeping them all!!! It does it every time you edit the file too. This means that I cleared out some 5000 registry entries that photoshop had failed to remove. Thing is that because they come under the type "file path problems", not all registry editors will even see them.

View 1 Replies


ADVERTISEMENT

Photoshop :: Registry Error After Launching...

Jul 31, 2009

I have a user who is getting a dialog box that says Registry editing has been disabled by your administrator.  This started happening after I copied the original user profile who had had administrator access to a new profile with power user access.  Do I need to reinstall the program? 

View 2 Replies View Related

Photoshop :: Error :: Write To Registry Failed Options Not Saved

Jun 22, 2004

i try to open a saved file in photoshop i get an error message saying "Write to registry failed Options not saved."

it shuts down whenever i hit the OK button.

View 2 Replies View Related

Photoshop :: Disable PIP Using Registry Key Or Preference File

Nov 13, 2012

I would like to disable the PIP using the registry key or preference file. I have disabled the adobe updates using the preference file.
 
<?xml version="1.0" encoding="UTF-8" ?><Preferences><Suppressed>1</Suppressed></Preferences>
 
What can i  do for PIP

View 2 Replies View Related

Photoshop :: Registry Setting To Enable Over-scrolling When Zoomed Out?

Dec 13, 2012

registry tweak to allow overscrolling on a PC when zoomed out to where the entire image fits on the screen, and I made a mental note to get back and try it, but now I can't find the post from which to get the specific setting.

View 2 Replies View Related

Photoshop :: How To Retrieve Version Installed Using Windows Registry

Jun 19, 2013

I would like to determine if the installed version is CS4 or higher using the Windows Registry.I currently have Photoshop CS4 and CS6 installed on my computer. They appears as follow in the registry:

[Photoshop CS4] HKEY_LOCAL_MACHINE/SOFTWARE/Adobe/Photoshop/11.0[Photoshop CS6] HKEY_ LOCAL_ MACHINE/ SOFTWARE/ Adobe/ Photoshop/60.0 

Does the folder "number" (50.0?) used for Photoshop 5?Also, for example, is it always 60.0 for Photoshop CS6? Even when an update has been installed?

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Registry Hack For Photoshop As Default Image Editor?

Apr 6, 2012

Is there any registry hack for setting photoshop as default image editor in coreldraw. i.e. when we double click an image, photoshop should launch?

Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM

View 13 Replies View Related

AutoCAD LT :: Set Registry Key From Script

Nov 21, 2012

I need to change the following registry key programmatically and add it as part of a script routine:

View 2 Replies View Related

Paint Shop Pro :: X5 With SP2 - Missing Typelib Key In Registry

Feb 19, 2013

Running Paintshop pro X5 on windows XP pro SP3. Update from SP1 to SP2 was successful, the program behaves normally for those bits I use. However, after installing SP2 a scan of the registry with CCleaner flagged a missing Type lib reference, {2E3D1417-1E33-4145-AF85-A151B9E95302}

This is referenced in the Type lib key under the following keys but is not defined under HKEY_CLASSES_ROOTTypeLib

ICorelRipple:
HKCRInterface{761E5581-E7DB-46A0-B0AD-DD19747844D6}
ICorelWindTiles:
HKCRInterface{80980957-0A6E-4067-B7E2-FD156341965D

[Code] ....

As I don't know what operations in PSP X5 those keys control, I don't know whether anything is broken as a result of the missing typelib key, or indeed whether those registry keys were made redundant by SP2, but not removed by its installation.

Provide the appropriate reg file to insert the typelib key into the registry, under HKEY_CLASSES_ROOTTypeLib.

View 4 Replies View Related

AutoCAD Inventor :: Getting An Addin To Load Without Registry

Sep 22, 2011

how to load an addin without using the registry for Inventor 2012? Failing that, I just can't seem to get it to work.

View 1 Replies View Related

GIMP :: Plugin Registry Broken (2013)

Nov 22, 2013

registry.gimp.org seems not to be working.

View 3 Replies View Related

AutoCAD Architecture :: Disappearing XRefs - Registry Settings?

May 1, 2012

If we have both the Xref and the File that it is referenced into open on one of the computers here and we reload, the Xref disappears.  If we do an undo and close the Xref it reloads without problem. 

I tried to replace the user profile from another PC that doesn’t have the problem, but it didn’t work. Is there a Registry setting that cause this behavior?  All stations set to “Enabled with copy”

AutoCAD 2012 Arch.

View 9 Replies View Related

AutoCAD Civil 3D :: 2013 Scale List In Registry

Jan 28, 2013

Having trouble finding the correct place to put the FEET, INCHES, METRIC, custom scales in the registry. I'm not sure if its any of the following or is it somewhere else now?

[HKEY_LOCAL_MACHINESOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_LOCAL_MACHINESoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales
[HKEY_CURRENT_USERSOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales

Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5

View 5 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Get Registry Key Value And Process It

Dec 12, 2012

I would like to capture a registry key value using autolisp if the value of they key equals TEXTEXAMPLE then exit Autocad else nothing.

View 4 Replies View Related

AutoCAD .NET :: Path To Create Registry Entries For Load DLL

May 19, 2011

I want to create a .reg file to load automatically a dll.I would like to generate this file from Autocad (using a subroutine). The entries are:

[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.1ACAD-9002:40AApplicationsSIMNET]
"DESCRIPTION"="Carga el archivo SIM.DLL"
"LOADCTRLS"=dword:00000002
"LOADER"="E:\acaddlls\SIM.dll"
"MANAGED"=dword:00000001

And I need to obtain from autocad next path " AutodeskAutoCADR18.1ACAD-9002:40A" (is different for any versión of autocad).

View 3 Replies View Related

AutoCAD 2013 :: Hitting Registry Setting Constantly

Mar 27, 2013

I have AutoCAD 2013 hitting the following registry location several hundred thousand times before closing a file:

HKLMSOFTWAREAutodeskAutoCADR19.0ACAD-B001:409LocaleID

Looking at a Procmon trace, there is a set of 3 entries: RegOpenKey,RegQueryValue,RegQueryValue and each is successful.

View 3 Replies View Related

Xara :: How To Save X5 Configuration By Saving Some Registry Entries

Sep 22, 2012

I used to know how to save my X5 configuration (screen layout, options settings etc.) by saving some registry entries. I've forgotten how to do that. I'm using 7 (not pro) now, how to do that again?

View 5 Replies View Related

AutoCAD 2013 :: Registry Settings To Disable Autodesk 360?

May 24, 2012

Any registry setting (or some othere way) to disable Autodesk 360.  My users have no reason to use this feature and I don't want them wasting time with it.

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: Shapes Have Static IDs And More On Get And Save To Registry

Sep 5, 2012

myMacro.zip

Well here's a final overview of everything we did. Mouth is now dry from all the talkin'....Miller time!

I hope you enjoyed this lesson. The gms file is attached to this post also.

You will want to see parts 1-4 first if you haven't already:

Part 1 |  Part 2 | Part 3 | Part 4

(PS Video size id 720pxX525px and may get cut off by the forum. Hopefully you can save it or view entire size)

cs_setInnerHtml('video_a67025bf-ffef-4d99-aa88-eb8b1396619e','');

View 1 Replies View Related

AutoCAD Inventor :: Edit Registry To Set Save Location Automatically

Nov 20, 2012

In my quest to remove any unnecessary clicks I want to be able to set the default location when you press Save, Save As, Demote or 'Save and replace component'.

Default it will show up a file save as dialogue starting from my workspace. Or my last saved location. I believe this is stored in the registry and hope to Intelligent adjust these registry value's using VBA.

When diving into the registry I believe I found the right keys here:

HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion17.0SystemPreferencesFileDialog

Problem 1:

- if i change them manually I don't find a difference in Inventor (If I change other things in the registry, this has an effect)

Problem 2:

how do I set them automatic using VBA? I've got the strings sFileLocation & sFileName true the rest of my code. So I would need to do something like:

 
Dim oRegFileSave as Regisry entryset oRegFileSave as

HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion17.0SystemPreferencesFileDialogLastFileSaveDialogoRegFileSave = sFileLocation & "/" & sFileName

 For your information, these are the registry entry's I believe I need to adjust:

View 5 Replies View Related

AutoCAD 2013 :: How To Disable Welcome Screen In Registry Or Startup In 2014

Jun 6, 2013

We are launching Autocad 2014 in a multiuser environment and trying to determine how to stop the WELCOME screen from appearing.

The /nologo switch is for a different screen. Need per user or prefer per computer registry setting to turn off the Welcome Screen.

Thought it was InfoCenteron key,set to 0, but that was not it.

Thought it might be MC3 key, but not there either.

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Add / Modify And Remove Registry Key?

Feb 27, 2012

Some time ago I was able to add modyfy and remove regestry keys ussing AutoLISP Unfortunatly I have lost the information on how to do this.

View 1 Replies View Related

AutoCAD Inventor :: Running View 2013 Does Not Create Registry Key

Aug 17, 2012

i am wanting to use the apprentice server in another program.  The apprentice server is 'normally' found in the registry under this key: 

ComputerHKEY_CLASSES_ROOTCLSIDC343ED84-A129-11d3-B799-0060B0F159EF

The problem is, that if you uninstall all things autodesk, and run a registry cleaner (or delete that key by hand), and then install only inventor view 2013 and run inventor view 2013, it will *not* create that key in the registry.

This makes it impossible to run the apprentice thru the COM mechanism, even your SDK samples will not work.

(i suspect (but havent proved), the bigger problem is on a brand new machine, install and run only inventor view 2013 , you still can't use the apprentice server.)

The 'workaround' is to install and run inventor view 2012.  running inventor view 2012 will create the registry key.  After that, running inventor view 2013 will happily update the key's value to the appropriate place. 

(C:Program FilesAutodeskInventor View 2013BinRxApprenticeServer.dll)

so try this :

1) run regedit and delete the key and all its subkeys

ComputerHKEY_CLASSES_ROOTCLSIDC343ED84-A129-11d3-B799-0060B0F159EF

2) optionally install inventor view 2013 ('as administrator' or not doesnt matter).

2) run inventor view 2013 ('as administrator' or not doesnt matter).   exit it

3) run regedit.  the key is not there still.  you won't be able to run any SDK samples or get an apprentice server using the following 'basic'

  Set ApprenticeServer = New ApprenticeServerComponent

i'm on windows7, x64.  (iv2013 is: build 126, Release: 2013 RTM)

is a bug in 'inventor view 2013', or is that intended for some strange reason?

View 2 Replies View Related

AutoCad 2D :: Insert PDF - Make Sure Object Is Entered In System Registry

May 2, 2011

if i try copy/paste or paste special i get this: 'failed to create object. make sure the object is entered in the system registry.

View 5 Replies View Related

AutoCAD 2013 :: Change Values Via Registry Instead Of Using Acaddoc File

Sep 27, 2013

I read in autocad help that these are saved in the registry. I'd like to change their values via registry instead of using acaddoc file. Where can I locate these in the registry? Could not find them...

View 5 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Change Profile Through Registry Settings

Jun 26, 2012

I'm trying to fix my profile via lisp-registry key. Why? Because the profile we use is part of a plug-in meaning we can do it using our profile so I alternatively the answer is to tweak the one supplied as part of the plug in.

The method I’m familiar with is to edit using the following code as example;

 (vl-registry-write "HKEY_CLASSES_ROOT\.PEN\Shell\open\command" "" "notepad.exe %1")
 
However that’s for creating a new registry key entry the one I have already exists but needs to be modified, better yet the profiles name (*.arg file) can change with updates, so in my search I came across the following link.
 
[URL] 

Now I cant put it together and am not sure where I have gone wrong…(See code bellow)
 
(vl-registry-write "hkcu "\Profiles\" (getvar 'cprofile) "\General\DefaultConfig" "\\DCMAR02\A03P20")

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Can't Append Registry To Value Of SAVEFILEPATH Variable

Oct 2, 2012

How come I can't modify the following registry key to the SAVEFILEPATH variable?
 
(vl-registry-write "HKEY_CLASSES_ROOT\SOFTWARE\Treadstone\File Sweeper" "NETWORK_LOCATION" SAVEFILEPATH)

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Registry Key For Current Profile (cprofile)

May 30, 2013

Which registry Key stores the name of the Current profile ("cprofile")?
I tried following, all reurn 'nil'

(vl-registry-read "HKEY_CURRENT_USER\Software\Autodesk\AutoCADR18.1\ACAD-9005:409\Profiles")

(vl-registry-read
"HKEY_CURRENT_USER\Software\Autodesk\AutoCADR18.1\ACAD-9005:409\Profiles\(default)")

In the registry when I double-click the key, the value is displayed. But I can't access it.

View 2 Replies View Related

AutoCAD Civil 3D :: Export Registry Key To Transfer Files And Paths Specified In Options?

May 17, 2013

Is there a quick way e.g. export Registry Key etc to transfer the files and paths specified in Options?

IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600

View 9 Replies View Related

AutoCAD Map 3D :: Delete All Program / User Folders And Clean Windows Registry

Mar 19, 2013

I have a problem to run Map 2013 today.

"System.IO.FileLoadException: Can't load procedure from 'MapPublishImp.dll'.File name: 'MapPublishImp.dll' in Autodesk. Gis.Map. TextEdit. UI.Map PublishHelper.Finalize()"

Fatal error and Map is closed..What I have done:

- Try to repair and reinstall, nothing

- Uninstall Map 2013, delete all program's and user's folders and clean Windows Registry, clean install of Map 2013, NOTHING (???)

View 8 Replies View Related

Paint Shop Pro :: How To Completely Flush Program And All Hidden Files And Registry Entries

Feb 25, 2012

I have PSP X2 on my laptop and it has developed a problem where it will not get through the initialization process. It comes up with the flash screen and after awhile the flash goes away and then nothing it just sits there and if you try to do anything you get a program not responding message and the only way out is to use the ctrl, alt, delete and exit manually. I have uninstalled the program and reinstalled it but this problem persists no matter what I do including going in and completely deleting everything corel from the hard drive.

how to completely flush the program and all the hidden files and registry entries so I can do a virgin install and start over without whatever glitch it has developed. There is an ini file or something that is staying on my computer and causing this problem.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved