Photoshop :: CS2 Colour Settings
Jan 29, 2007
I am trying to set up my colour settings as a recommended profile supplied by a commercial printer.
The problem is under, - Colour Settings - "Working Spaces"- "CMYK" - they recommend the setting should be "Euroscale coated v2" but, i am not given this choice in the dropdown menu. All that is available is - "PS 5 default", "PS 4 default", "Custom", "Load CMYK", "Save CMYK" and, a greyed out "Other".
I have also noticed that under "Colour Settings - Settings" - there is not the same choice that I have seen discussed in forums, eg I have seen "North America General Purpose 2" or "Europe General Purpose 2" mentioned, these choices do not appear in my drop down menu, only "PS 5 default spaces", "Custom", "Untitled" and a greyed out "Other" are visible.
I suspect that the reason behind this problem is that somewhere else in CS2 i have inadverently changed a setting which affects my choices in the Colour settings.
View 1 Replies
ADVERTISEMENT
Oct 27, 2012
I changed my Color Settings in the Edit menu to 'Best Workflow CS4' which apparently synchronized my color settings, but the printed colors are now muddy and have lost their vibrancy.
It is a US orientated setting for US inks. I am in the UK and use Ilford Smooth Pearl Paper with the appropriate color profiles loaded. What are the recommended color settings for printing in the UK?? Is it Europress 2 which is what I'm now trying out?
View 7 Replies
View Related
Jan 29, 2007
CS2 Colour Settings? I am trying to set up my colour settings as a recommended profile supplied by a commercial printer.
The problem is under, - Colour Settings - "Working Spaces"- "CMYK" - they recommend the setting should be "Euroscale coated v2" but, i am not given this choice in the dropdown menu. All that is available is - "PS 5 default", "PS 4 default", "Custom", "Load CMYK", "Save CMYK" and, a greyed out "Other".
I have also noticed that under "Colour Settings - Settings" - there is not the same choice that I have seen discussed in forums, eg I have seen "North America General Purpose 2" or "Europe General Purpose 2" mentioned, these choices do not appear in my drop down menu, only "PS 5 default spaces", "Custom", "Untitled" and a greyed out "Other" are visible.
I suspect that the reason behind this problem is that somewhere else in CS2 i have inadverently changed a setting which affects my choices in the Colour settings.
View 2 Replies
View Related
Aug 25, 2012
how to set up the colour management settings to achieve the best printing results with elements 10
View 7 Replies
View Related
Dec 30, 2012
I installed 2013 and went straight to the customize settings to tone down the grid intensity. It's always the first thing I do. The colour changes but if I restart max the setting reverts to the installed default. Strange thing is, I also change the viewport active border colour, but that setting is being remembered fine.
I can't remember ever having problems installing max, but first the 2013 installer caused all sorts of problems with .NET, and now this.
View 4 Replies
View Related
Aug 28, 2012
What I am trying to do is to have a flat vector brush in black that I can change to whatever colour I want later just be selecting the colour from the colour bar while I am working.
So. When I edit the brush I go to the fill Properties tab and select 'Local colours replace - all brush colours' and save. The trouble is that it does not seem to save this setting. When I edit the brush again it reverts to 'local colours replace - named colours' I get the same problem if I 'save as new'.
View 5 Replies
View Related
Aug 9, 2011
I have just purchased Corel draw x5 and need to change the colour management default settings but when i go to tools, colour management, i only have document settings! I have done this with new pages, old pages, images on pages etc and no luck.
View 6 Replies
View Related
Aug 21, 2012
I am in Application options and am changing the background colour of the screen, hiding the grid lines, ticking the autoproject on sketch creation etc...changing the settings to how I like them. Apply them, model something, open Inventor 2011 the next day and all of the settings have gone back to what they were..
View 4 Replies
View Related
Oct 12, 2013
I'm going to try this again. Using PS CC for photographers, that is Photoshop CC and Lightroom 5.x, new iMac running Mavericks.
Having processed an image in LR and PS, and saved as TIFF back to LR. All is well.
If and when I subsequently take the TIFF back into PS for further tweaks and again save as TIFF back to LR, replacing the original TIFF, I then get the Metadata Conflict warning, the exclamation mark.
As far as metadata goes, I don't want to lose what I did in LR....that is, keywords, color codes, captions, gps data, etc. I do want to retain the additional adjustments I made in PS.
I've noticed that when I choose to 'import settings from disc' that the color code disappears and I have to re-do it.
If I select the 'overwrite with LR settings' option, my concern is that I lose those PS adjustments.
My questions is: WHAT settings could have been changed in my round trip to PS that trigger the warning?
View 3 Replies
View Related
Jun 18, 2013
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies
View Related
May 21, 2013
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
View 2 Replies
View Related
Aug 19, 2013
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
View 2 Replies
View Related
Aug 10, 2013
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies
View Related
Feb 25, 2004
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
Jul 16, 2013
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
View 9 Replies
View Related
Jun 11, 2012
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Jan 28, 2012
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies
View Related
Jun 24, 2011
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
View 1 Replies
View Related
Jul 28, 2012
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
Feb 23, 2012
Photoshop CS5 v12.1.
Mac OS 10.6.
I'm printing to an Epson R1800 printer.
Print. Choose Color Management. Choose Document. Choose "Photoshop manages color". Choose the correct printer profile that matches the paper I'm using. Choose Relative Colorimetric.
THEN, I click Print Settings...under the 4th drop downu I choose "Print setting..." again. Under "Basic" "color" and "Color settings" are grayed out as are some of the "Media Type" options.
Is this normal? The problem is my black and white prints are printing really badly. They have color tones. I've cleaned the nozzles on my Epson printer, done everything the print utility suggests. All the test prints look fine.
View 3 Replies
View Related
Nov 3, 2005
how I can to reset all the settings back to default settings...
View 3 Replies
View Related
Jul 26, 2013
Windows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
View 2 Replies
View Related
Jun 4, 2013
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies
View Related
May 7, 2005
i recieved a prom pic from my daughter and i was going to print it and frame it, but 2 things happend.
The first one was that when i tried to print it it said it was tooooooo big 40inx60in so i resized it to 8.5x11 and it got very blurry, after about an hour i figured out how to get it sharp again (by accident) and forgot how i did it DOH!!! It was some kind of compairson with 4 of the same photo and resizeing the file from 9.5M to about 400kb and actualy adding some blur.
The next problem is when i printed it, it was so washed out it looked like an old 70's poloroid but on screen it looks great. Now I've read the color settings section but i think i might have set some settings wrong [U]and i don't think i fully understand what i'm reading . I know there are settings to either let photoshop take care of the printing or let the printer.Personaly i think i would like to let photoshop do it that way any email's or photo's i shoot will have a common baseline. The printer i'm using is an hp psc 2410 and the camera is a minolta dimage7i, is this a good camera / printer. I'm in adobe rgb(1998) mode and i think i saw somwhere in the printer software to choose between adobe rgb or the hp printer.Do these have to match.
Put simply how can i print it the way i see it on screen
I know ....long winded but i try to give all the info i can
software: adobe photoshop cs2
Card: nvidia geforce ti 4600
crt: compaq mv 940 17in regular screen 1024x768
Printer HP psc 2410
Camera: Minolta Dimage 7i
View 2 Replies
View Related
May 2, 2012
I’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.
View 8 Replies
View Related
Sep 3, 2013
Can Photoshop CS6 Camera Raw picture settings be synced with Lightroom 5 picture settings?
View 2 Replies
View Related
