I am trying to get three roses out of a photo so that I can put a texture behind them. how to do this. Masking is so tedious and them when I do get them masked off, how to get them out. I have tried looking in about 4 Photoshop books and on-line but to no avail.
View 4 Replieshow to manipulate the size of the wipeout for a text mask.
Simply selecting the masked text in C3D 2011 provided pick boxes at the four corners of the wipeout, making it very easy to manipulate the size of the wipeout box. I'm hoping to do the same in C3D 2012, but the wipeout seems to be treated like a block and lacks the pick boxes.A system variable maybe?
I have some really nice photos of flowers and I'd like to try and achieve images like these - any tips? I've tried brushing 10% opaque around the edges but that looks naff ..
View 1 Replies View Relatedway to selct the flowers of the bride & everything else blk&wht?
to make a nice black and white image?
if I can change the colour of this flower from orange to white.
I want to keep the stem the same colour.
When creating a selection in CS4 and then adding the selection as a mask I cannot seem to get around a black background surrounding the selected portion of the image by default.
In CS2 the background surrounding the selection/mask displays as a pattern of small gray and white squares, which I usually prefer for initial review of a selection as a mask. Yes, I can go the mask panel in CS4 and switch background views but none utilize the gray/white pattern as used by default in CS2.
Can this behavior be changed? I've tried manipulating preferences to no avail and cannot seem to locate any options to change the default display options.
I am a Photographer and use cs 6 for a long time.I use layers with masks to use background foreground.Normally when i use this, the brush uses 100% too get the back/foreground, but now its not 100% anymore and i get a transparency of the layer (brusch stands on 100%)
View 4 Replies View RelatedI have an image of a dog that I'm editing. I took the photo in a studio with a white backdrop. I want to remove a shadow that is behind the dog so the whole background is white. I do not want to lose the detail in the fur of the dog. I've tried doing a mask layer with making the background white. I've also tried the dodge tool. I've tried the selection tool but it look out?
View 4 Replies View RelatedI am reading a tutorial about the background eraser, and in this tutorial, on the screenshots, the erased parts are in red. It is the same red than the default one for the mask mode.
Is there a mode to see the mask color instead of what there is beneath the layer ?
Note : Maybe the tutorial author put a red layer beneath the current layer...
PHOTOSHOP: Changing the background in a photo within a custom-drawn mask
View 1 Replies View RelatedI am trying to add an MTEXT background mask in vba I know it may be easy to do in lisp but I already have a working vba code for creating the MTEXT just need to add the background mask into the text.
all the codes I can find in the internet are doing it in lisp.
I'm looking for the best way to create some sort of background mask in my blocks.
I'm using blocks as my mechanical symbols, to be inserted into my piping and instrumentation diagrams.
The diagrams contain several lines, and in the past the company would simply trim out the lines around the symbols. I would like to stop trimming the lines by simply putting an invisible hatch/mask around my blocks.
It's kind of hard to see on this photograph, but there is shading that occurs to the left and top of the MTEXT on plots only. This happens about 80% of the time, with no rhyme or reason as to why it does or doesn't....
We are printing to HP/GL-2 using HP drivers. I'm sure it's a print driver thing.
I have labelled an FDO feature which include a TEXT BACKGROUND (Mask) white in colour to make the text stand out. I attempt to savecurrentmaptoautocad thinking that the Text Mask will come across as a HATCH Patterm but nothing is coming across when I open the DWG file. I have been through all the options to try and get the mask to appear in the new DWG file to no avail
View 6 Replies View RelatedAny way to change the default settings for the background mask used with Mtext?
View 9 Replies View RelatedWhere I can get started with a lisp routine that will apply or remove from a selection of text objects (or MLeaders), a background mask set to standard 1.5 coverage; fill color set to background?
View 2 Replies View RelatedWhen I try to apply the background mask while inside the text editor of the dimension the background mask does not apply. However if I right click the dimension -> properties-> text->fill color -> background, it works.
View 4 Replies View RelatedI used to be able to edit the dimension to include background mask and suddenly cannot.
i really need the BGM.
My background masks is displaying a border (which is not desired) and they are not masking the backound but instead are masking the text. What gives? (see attached)
This issue is specific to one drawing. It seems to effect all background masks regardless of style. They are set to use drawing background color. And border option is set to false in the label styles.
The last items I worked on in the last sesson where to create a corridor and an intersection.
Also, why the pen table is printing correctly that would work as well. The attached image was printed using a black/white pen file. Go figure.
C3D 2012 SP 2.1
I am trying to use a lisp that will turn on a background mask on selected mleaders. I found the attached lisp here [URL]. it works good except the mask border offset factor is set to 1.5. I need the offset to be 1.0. When I look thru the lisp code it says the default is 1.0 but can be changed.
how I can use the lisp and get mask offset factor to be 1.0?
C3D 2010
3G RAM
XP PRO, SP2
I can't get background mask to work on one dwg
I can go into another drawing on my machine and it works just fine
it looks like its working until I zoom in or out then it doesn't work at all
Is it possible to have attributes (annotative text) with a background mask in a block? Our intention is to include text to describe the status (demolition, existing or new) of various equipment.
The drawings themselves (lines, hatchs, etc.) would not be scalable or annotative, but we do want the text included to be annotative.
We normally include a hatch behind text or drawing elements (with a 'ByBlock' color) so we can 'manually' give it a background color of our liking and then scale the block in question. This way, the 'manual background' automatically scales with it.
However, with the annotative way of doing things, our solutions doesn't work anymore because blocks like these ones are now insert at a 1:1 scale and the text included will scale accordingly. I'm looking for a way to add a background mask to an annotative attribute.
If you can background mask dimension text the same way you can with mtext. I know i can explode the dimension and edit the text and give it a background, but that is poor practice. I still want to keep the dimension associated.
View 4 Replies View RelatedHow come my background masks on text no longer mask the background?!
I have looked done new drawings and it works. It also works in the drawing in question but only over items in paperspace, it does not work over the viewports.
If you select the text you can see that the mask is there.
I tried draw order but everytime I did it everything always seemed to back to "back" even if I just changed it to "front"
Another draftee had worked on these drawings but I doubt he would have sabotaged them (and he wouldnt know how..)
I have seen this happen randomly before.
I was experimenting with using multileaders today and changing their styles. What I can't work out is how do I change the color of the background mask? All I could do was turn on and off the 'background', not change the color of it.
View 9 Replies View RelatedI have found where / how to apply a background mask to text (listed in the properties box when I highlight text). The list of fill colors does not include white. I was hoping to create a background mask that did not add a shaded box to a black and white print but simply blocked out the contents behind the text.
I am using 2010 LT if this makes a difference.
I can't find a 'background mask' on/off toggle in the 'Multileader Style Manager' in AutoCAD 2013. In the 'Dimension Style Manager' you can easily add a background to dimension text in there but it doesn't seem to be an option for a multileader style. Did AutoCAD actually miss this?!? If so that is a huge inconsistency. I want to have a multileader style preset in a template with the background text masks on. I hope it's not something that a user needs to go and first do their multileader, then afterwards have to go and manually turn the mask on via the properties pane.
View 3 Replies View RelatedHow do I turn off the background mask on dimensions in my inventor dwgs (i.e., so the text doesn't cover up the dimension line.)
View 2 Replies View RelatedWhen printing a plan with a background mask, the mask shows as a bunch of ting gray dots. Also we have a plot style, using STB, that is supposed to print white, but it too prints as a light gray hatch. It is not that big of a deal until we scan to run sets. The dots and hatch get picked up more intensely by the scanner and it looks like hell, a big gray background. It happens on label masks too: contours, structures, etc. Wipeouts are okay, but those are not used much anymore. I am printing to an OCE TDS600 with current drivers, I have even tried older drivers. I also tried printing to DWF then to the printer and got the same result. Printing to DWF actually added little gray plus signs for the wipeout. The scanner is a OCE TDS600, and we plot with the grays & lines setting.
I have heard the dots are unavoidable, but I really don't want to believe that because it makes our plans look like crap.
Is there a way to change the defaults?
Presently, the Fill Color defaults to "Red" and I have to check "Use drawing background color" every time. Certainly there must be a way to change this?
While I am at it, how about line space distance? Ditto on default justification, height, etc., etc.?
Is it a know issue that when you have a General Note style with a Dragged State where the Display is set to Stacked Text. If Background Mask is set to True. The Mask does not encompass the whole text.
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600