Photoshop :: CC On Windows 8 Canvas Flicker
Jul 10, 2013
I've Recently updated to Photoshop CC on windows 8, and I'm getting a really bad flicker whenever I use it (it feels like I'm having a seizure). I have seen on various forums as well as in the offical Adobe section that this is an issue. The recommended solution was to reduce graphic processing setting to basic. I did but nothing has changed. I also read that people had turned graphic processing off completly, this also didn't work.
I'm am using a Intel(R) HD Graphics 4000 in a Dell xps.
View 1 Replies
ADVERTISEMENT
Sep 1, 2012
I recently installed Windows 8 RTM and Photoshop CS6 Standard. I have installed the patch brining it up to 13.1 but rotate via the intuos tablet and it doesn't work. Intuos5 has touch now and that feature works on my laptop with W7 and CS5. Rotate canvas is also available on the touch ring but that doesnt work either.
View 4 Replies
View Related
Mar 13, 2013
I'm rather puzzled with what happened to my Photoshop, i'm using Adobe Photoshop CS6 on a Windows 7 64 bit Notebook.when i'm in the office, it's docked at its station and connect to a larger monitor (via standard VGA plug on the dock) and i use both monitor (not closing the lid on the notebook) today, i had a spare monitor around that i can use, i plug it through the Displayport plug on the dock, it's all working fine, all three monitor display the desktop.
but when i load up photoshop, making new files or opening existing files, there is nothing in the screen although the layer panel shows there is something there.when i unplug the new monitor, everything back to normal.
View 2 Replies
View Related
Feb 10, 2013
I have bad screen tearing in gimp 2.8 in windows 7 x64, making it almost unusable! (see youtube link: [URL] look around 15 seconds into the video )
i just reinstalled windows after using linux for a few months , gimp worked fine in linux (ubuntu x64) with the same hardware. i had the problem before in windows and i have it again with a fresh install
i have tried gimp 2.8.0, 2.8.2 and the same problem with the new one (2.8.4), same problem aswell with gimp 2.9 development builds. gimp 2.6 works fine with no screen tearing at all.
hardware specs:CPU: Intel® Core™ i5-2500K CPU @ 3.30GHz (3292.53 MHz)Memory: 16368 MB
OS Version: Microsoft Windows 7 64-bit Service Pack 1 (Build 7601)Graphics Card Vendor: NVIDIA CorporationGraphics Card: GeForce GTX 460/PCIe/SSE2Graphics Driver version: 310.90
View 5 Replies
View Related
Feb 10, 2013
Did you get the driver from nvidia's Web site? Check for firmware anddriver updates first.Yes a bad move :P but i need to use some software that's not compatible with linux.
An obvious 'solution' is to install Linux as a VM under Virtualbox.
View 2 Replies
View Related
Feb 10, 2013
I have bad screen tearing in gimp 2.8 in windows 7 x64, making it almost unusable! (see youtube link: [URL] look around 15 seconds into the video )
i just reinstalled windows after using linux for a few months , gimp worked fine in linux (ubuntu x64) with the same hardware. i had the problem before in windows and i have it again with a fresh install
i have tried gimp 2.8.0, 2.8.2 and the same problem with the new one (2.8.4), same problem aswell with gimp 2.9 development builds. gimp 2.6 works fine with no screen tearing at all.
hardware specs:
CPU: Intel® Core™ i5-2500K CPU @ 3.30GHz (3292.53 MHz)
Memory: 16368 MB
OS Version: Microsoft Windows 7 64-bit Service Pack 1 (Build 7601)
Graphics Card Vendor: NVIDIA Corporation
Graphics Card: GeForce GTX 460/PCIe/SSE2
Graphics Driver version: 310.90
View 1 Replies
View Related
Jul 23, 2013
I have photoshop cc currently and it works fine other than when i try to transform an object. The view of the document flickers, the background goes through alll the possibe colors and the work space flickers from the image to a complete black block... Is it my computer or the program?
View 5 Replies
View Related
Sep 13, 2012
I'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies
View Related
Feb 23, 2012
I just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies
View Related
Apr 26, 2013
Why does my screen flicker when cropping and image turn solid black so I can not see image?
View 5 Replies
View Related
Nov 21, 2010
Back in the late 60s and 70s I had a 8mm video camera. One of those take 50' of film and send it off for developing. In the 80s I got my first talky Hi8 video camcorder. Back then I had to set up a screen, set my camcorder next to the projector and shoot away. Now I am transferring these videos to DVD so I can open them in VS X3. As might be guessed there is a lot of flicker in the videos.
Is there any way to Eliminate this flicker during post edit in VideoStudio X3?
View 1 Replies
View Related
Oct 26, 2012
I have an issue that every time I render a scene with photometric lights and have the exposure control set to Mr. Photographic exposure, outdoor night time, I get flicker. It appears to be an interlacing problem, but looks like the lights are flickering bright and dim. I am rendering as a .jpg sequence.
View 3 Replies
View Related
Nov 27, 2013
i am facing a problem while making animation walkthrough for an exterior scene.when i render lot frames in mental ray n thn make a movie of it, there are lot of flickers and patches seen in the scene.URL...
View 3 Replies
View Related
Jul 5, 2012
The issue happening when 3Ds Max is NOT on maximize viewport mode and showing 4 viewports at the same time and viewports start to jump, flicker and change randomely as if there is no specific view assigned for each viewport, and that causes a problem when I want to see and work with my model in 4 different views at the same time.
I'm cureently using 3Ds Max 2013 and previously the issue was exactly the same for 3Ds Max 2012. I should add that this issue is gone when I use OpenGL, but I really want to use it with "Nitrous" feature which gives more realistic real-time results.
Below is my system performance specs:
Dell Mobile Workstation Precision M6600
i7 - 2960XM CPU 2.7 Ghz
Nvidia Quadro 4000M - 2GB DDR5
8GB - 1600 RAM
View 2 Replies
View Related
Jan 10, 2012
I have just bought a new laptop to try and be a bit more mobile.I have upgraded and loaded AutoCad 2012, no problems so far.The problem I have is when the program is opened and I hover the mouse off the drawing area over the ribbons etc,I unplugged my wireless mouse and used the touch pad as I thought the mouse was the problem, no good.
I have checked the display and graphics drivers and they are all up to date.I did a bit of a search regarding this problem. One suggestion was to change the display settings from 32bit to 16bit, this did no good. Also another was to change the Hardware Acceleration, and some people said this worked for them. However I tried this but the button was greyed out and wouldn’t allow me to change.I had no problems with XP Pro, I am beginning to hate this Win 7 operating system, I can’t understand why Microsoft always have to change things when it’s not broken.I eventually wanted to have this Laptop plugged into my 27inch monitor and use it as a desktop computer, but have the mobility.
View 5 Replies
View Related
May 6, 2013
When I publish to Flickr, I want to use a white watermark for some and others I want to use my black watermark (because the background colors on the photo warrant one or the other, otherwise the watermark will not show). Do I have to publish each photo separately and not in a combined group or is there a way to indicated which photo I want the white watermark on and which I want the black watermark on?
View 2 Replies
View Related
Sep 26, 2013
Using Autodesk BDS 2014 - AutoCAD Architecture..
If I load the attached lsp file, I will find on the final line at the command prompt...
No canvas exists. Click New Canvas.
View 2 Replies
View Related
Sep 19, 2012
Strobe/Flicker effect alternating between 2 clips in VideoStudio?
Say I have 2 clips, one of movie A, one of Movie B. I want one to play for half a second, then the other to play for half a second. Repeat for about 30 seconds. I could take each clip, split it up into half second increments, then insert each one alternating. But that is about 60 splits and a lot of redundant mouse work!! See the problem??
Is there a way, either through effects or other dev tools, to speed this process up?
Here is example of the effect i'm trying to achieve:
[URL].........
View 1 Replies
View Related
Aug 31, 2011
I have some windows that i'm trying to simulate light coming from. I'm just assigning a constant shader to some polygons. The polygons are animated moving from a distance to the camera but i can't stop them flickering. Each window seem to take turns at turning itself on and off!
No FG in the scene, i've tried all the different filter types, set the sampling contrast to .01 and tried different options such as same sample pattern on all frames but i can't eliminate it.
View 1 Replies
View Related
Aug 3, 2013
Having a screen flicker problem since 5.cRC came out, but only in Library/Grid mode when scrolling or selecting from the grid. But only when there are more images than can fit on one page in the grid.Seems to use an unusually low amount of memory with nothing else running on the system.
View 6 Replies
View Related
Jun 3, 2011
When I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
View 2 Replies
View Related
Sep 10, 2012
Image below shows 6 core usage during edit of an image using LR 4.2RC. Image import was running in the background. This only occurs when I use the develop module sliders (it doesn't matter which slider).
View 18 Replies
View Related
Jul 11, 2011
I'm trying to understand why adding colour correction, or auto contrast to my some of my clips is causing them to have flicker. It's not a consistent flicker either, but random.
The footage affected is 720p at 29.97fps in a timeline with the same settings. The raw footage appears fine. Once effects are added, the image stutters. I have rendered the preview files and the issue remains the same, likewise when exported.
View 34 Replies
View Related
Mar 8, 2013
I was wondering if there is some equivalent in Smoke to Final Cut's flicker filter, which I use frequently to eliminate flicker and 'buzzing' caused by fine lines, especially evident when HD is down converted to PAL for broadcast?
View 1 Replies
View Related
Aug 23, 2013
Is there a rotate canvas plugin for cs2 that works like the rotate canvas in sketchbook pro?
View 4 Replies
View Related
Dec 2, 2013
Why can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
View 4 Replies
View Related
Jan 10, 2012
This just started happening after I downloaded DWG TruViewer. I am working on LT 2008 using Fusionware on a MacPro. I needed the viewer to convert newer drawings from an architect. Now, when I double click on a drawing in Explorer a separate AutoCad window opens for each drawing I need open. I prefer to just go up to Window>and click on the one I need at that time, especially if I have several to switch between because it is easier to see the file name I want.
SDI is set to 0
Taskbar is set to 0
Relaunched the program
I can't open files using File>Open because the program crashed each time and Autodesk is not issuing anymore fixes for 2008. (Yes, we should upgrade but there is no money budgeted)
Right-click on any .dwg file and go to Properties>General>Change> and select the AutoCad LT launcher as the preferred program
Since I am in Window 7 instead of XP the File Types tab has been removed from Folder Options so I can't fix it that way.
So, why did this change? FYI that stupid TruViewer made lots of unnecessay changes to my AutoCad and Explorer programs that I am still trying to sort out like changing the file icon and hiding the file extensions. Are they trying to make it hard to find files or what?
And next, how can I reset the default so that double clicking on a .dwg in Explorer opens in already open AutoCad window?
View 5 Replies
View Related
Sep 8, 2011
We can preview the DWF files in Windows Explorer with Windows XP but cannot seem to be able to with Windows 7 64.
View 7 Replies
View Related
May 17, 2013
AutoCAD LT 2011 has been installed in a Windows XP computer.When logging into this computer using the Windows Administrator Account, all AutoCAD LT 2011 features are available.
But when logging into this same computer using the Windows Limited / Restricted Account, all AutoCAD LT 2011 features are missing.How can we get all the AutoCAD LT 2011 features back using the Windows Limited / Restricted Account?
View 1 Replies
View Related
Feb 28, 2009
i resently installed cs4 and when i open a new doc and creat a canvas... the canvas shows up in my layers but not on the screen.... the same is true when i open a past project... the layers of the project are in the layers palate but their is again .. no image on the screen...
i tryed uninstalling and reinstalling.
i have:
vista ultimate x64 sp1
amd phenom 2.3 quad-core
4gb ram
512mb graphics
1t hd
View 1 Replies
View Related
Mar 11, 2009
I insert pictures on camvas on Photoshop cs4 ok?the size is even bigger or smaller from canvas. I need to insert a picture and with a single command (key shortcut) this picture to be resized to fit the camvas 100%.is there a key shortcut that does this action?i dont want to create an action.
View 4 Replies
View Related
