When I publish to Flickr, I want to use a white watermark for some and others I want to use my black watermark (because the background colors on the photo warrant one or the other, otherwise the watermark will not show). Do I have to publish each photo separately and not in a combined group or is there a way to indicated which photo I want the white watermark on and which I want the black watermark on?
View 2 RepliesHaving a screen flicker problem since 5.cRC came out, but only in Library/Grid mode when scrolling or selecting from the grid. But only when there are more images than can fit on one page in the grid.Seems to use an unusually low amount of memory with nothing else running on the system.
View 6 Replies View RelatedImage below shows 6 core usage during edit of an image using LR 4.2RC. Image import was running in the background. This only occurs when I use the develop module sliders (it doesn't matter which slider).
View 18 Replies View RelatedI recently starting using 4.2, first time using any Lightroom application, and I found how to set the watermarks but no way to actually apply them to my photos.
View 1 Replies View RelatedDoes the watermark only used for images to be used for web base or put your watermarks on the actual printout?
View 2 Replies View RelatedSince updating to v4.3 I am unable to attach watermarks
View 3 Replies View RelatedFor some reason, the photos that I add watermarks to aren't saving with the watermarks on them.
View 5 Replies View RelatedHow do I correct spelling in Lightroom 4 watermarks
View 1 Replies View RelatedUpgraded to Lightroom 4.4 today, and have noticed that my cuastom watermarks will not apply to exported images. Additionally I am unable to edit and/or delete. is this an old Lightroom glitch that has come back?
MacBook Pro with OSX Mountain Lion.
I have just started using Lightroom 4 and absolutely love it....until suddenly my watermarks have stopped working and are not showing when added or exported.
View 2 Replies View RelatedI make many pdf book in lightroom. But i don´t know how to insert watermarks in the photos that are in this books. How can i insert?
View 1 Replies View RelatedAll of a sudden they are all gone. I can see them in the libraty under the Application Support/Adobe/....
I made a new one and that new one is not in the Library. So here are the watermarks being stored?
LR 5.3 then LR 5.2 to see if I could restore the missing watermarks.
How do I delete all of my watermarks from the page they are on, and start over?
View 7 Replies View RelatedI'm working on a project where I need to export hundreds of custom images for use on a website. Each image needs to have a watermark on it. So I created the watermark in Illustrator, then placed it into a 900 pixel x 900 pixel file and saved for web as a PNG-24 with transparency.
When I export images form LR3 using the above graphic as a watermark the image quality is great, but the watermark has rough edges and is pixelated at any setting under 2500 pixels. I need to output down as small as 150, 225 and 250 pixels. I can do this in photoshop and the watermark looks great. Yet from LR the quality is noticably bad. See the attached file.
how to improve the quality of the watermark?
I'm using multiple catalogs (one for each client). Is there a way to transfer watermarks from one catalog to another or do I have to build them from scratch in each catalog?
View 1 Replies View RelatedWhen I was first using LR I was playing around with a watermark for my pictures, as well as a watermark. After I created the user preset and watermark, and also became more comfortable with the program and understanding what all settings meant, I wanted to edit them saving them under the same name, hoping to replace previous settings. However all I got was a notice that "The name is already in use." This then caused me to save the settings as a new preset and watermark. I was just wondering if there was a way to delete those original presets that I am not happy with?
View 8 Replies View RelatedExporting a new round of images to my rebuilt photo website this week, and very glad that LR can generate year-specific copyright tags, which are infinitely less cumbersome than my previous tactic of trying to pull copyright metadata from images at the site level.
So far, I'm preferring the watermark layout size consistency of Lightroom's default watermark system over results from the otherwise excellent and flexible LRMogrify2 plugin.
I'd like to either leverage a token to use copyright metadata within custom watermarks or find out how to reposition/restyle the default Simple Copyright Watermark, eg have the Simple Copyright Watermark show up in a font other than Myriad in a different position on my images...
Hope this isn't too obscure or poorly-articulated a first question in these forums.
(Running Lightroom 4.3 on Mac OS 10.75).
l has a tool allowing address of the default fonts for watermarks and other presentation variables in a sideways way through translation settings. It's a strong start, but other fonts are looking even more shoddily rendered by this method. Back to fidding with size and ratio options in LRMogrify2.
When I export pictures from LR for web the text sometimes come out as expected, but other times it comes out with hard jagged/pixelated edges. I have so far been unable to find a pattern to when this happens, but it has followed me since LR3 on a different PC.
Above shows an example. Proper watermark on top, pixelated on the bottom.
The watermark has been made using a TTF-font from LR. Current system is a fairly highspec PC, win8 and LR4.1 (64-bit).
The company I work for needs to manage and watermark many different types of photos (perfect for Lightroom.) The only problem is, when Im uploading photos to our website, the Lightroom watermarks dont show up in the thumbnail preview of Windows Explorer. When I right click the image thumbnail and select "preview" the full size image preview pops up with the watermark. I guess my question is, is there any way to get the Lightroom watermarks to show up when viewing files in Explorer in large thumbnail view?
View 1 Replies View RelatedI like using the Flickr uploader through Lightroom (I have 4) to keep my Flickr images up to date. I have taken to adding a copyright to my images, but have become involved in a project that requires a different copyright for select images. Is it possible to use the uploader service to add one copyright to some images while adding a different one to other images? Or do I have to export images and then manually upload them to Flickr? I would rather not do that, if possible, just because I wouldn't have the added benefit of being able to have image metadata and edits automatically update in Flickr as I do them in Lightroom.
View 4 Replies View RelatedAsus motherboard, i7, 930. 24 gig Kingston HyperX ram. Windows 7 Professional 64 bit. 5 SATA hard drives: 3 are WD 7200s; Driive C is a Plextor SSD and Drive G (where LR and Photoshop are installed), is an Intel SSD.
I've had LR 3 and 4 and 4.1, 4.2 and 4.3. I have several hard drives. All the LR programs are installed on my G drive.
This time when I installed the update to 4.4, it did install on the G drive, but instead of creating a folder in Program Files, all the files, including the executables, simply installed in a long long row under Program Files and under the folders for the previous versions of LR. It did indeed install 4.4, but it's a mess and I can't figure out why there was no folder created.
When going into LR my copyright is gone and all the various styles of copyright I'd created in the Watermarks folder are unavailable. I also have 2 Nik Filters and 2 Topaz filters - they too are unavailable from the upgrade to 4.4. I also had a plugin for Zenfolio which is also missing and I can't find any plugin folder. Where is the plugin folder supposed to be?
It has never been clear to me which folders are supposed to reside on the same disk as the main LR program and which folders can be kept on another drive. Perhaps this is part of why I lost so much information.
I do have backups and I've been able to retrieve a lot - but I would like to be able to have the correct folders in the correct directories and drives. For example, when I updated to the new camera raw and dng, it was installed on my drive C, as it usually is. But the LR 4.4 files installed in a big list, although fortunately on the correct drive. And I have to reset all my settings, all my watermarks, my plugins and my filters.
Why did this happen and what can I do to repair it properly both for the best functioning of LR 4.4 and to not have this repeat itself with the next upgrade.
I have tested this in both LR4 and 4.1RC2. 3.x versions and below I never seemed to have a problem. Using Windows 7 x64 SP1.If I have an export preset that adds a text watermark, it works fine in any image that is either already smaller than, or gets resized to 3118 pixels in height. If I tell it to resize to 3119 pixels, then the watermark is never added.
I usually crop all my images to 8x10 ratio. And then dont resize them at all, so they stay at their maximum resolution.The watermark is simply a TTF Font, set to show up proportionally in the lower right corner.
Here is the 3118 pixels tall image.And here is when it is resized to 3119 pixels tall:
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
Using AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
I've Recently updated to Photoshop CC on windows 8, and I'm getting a really bad flicker whenever I use it (it feels like I'm having a seizure). I have seen on various forums as well as in the offical Adobe section that this is an issue. The recommended solution was to reduce graphic processing setting to basic. I did but nothing has changed. I also read that people had turned graphic processing off completly, this also didn't work.
I'm am using a Intel(R) HD Graphics 4000 in a Dell xps.
Back in the late 60s and 70s I had a 8mm video camera. One of those take 50' of film and send it off for developing. In the 80s I got my first talky Hi8 video camcorder. Back then I had to set up a screen, set my camcorder next to the projector and shoot away. Now I am transferring these videos to DVD so I can open them in VS X3. As might be guessed there is a lot of flicker in the videos.
Is there any way to Eliminate this flicker during post edit in VideoStudio X3?
I have an issue that every time I render a scene with photometric lights and have the exposure control set to Mr. Photographic exposure, outdoor night time, I get flicker. It appears to be an interlacing problem, but looks like the lights are flickering bright and dim. I am rendering as a .jpg sequence.
View 3 Replies View Relatedi am facing a problem while making animation walkthrough for an exterior scene.when i render lot frames in mental ray n thn make a movie of it, there are lot of flickers and patches seen in the scene.URL...
View 3 Replies View RelatedThe issue happening when 3Ds Max is NOT on maximize viewport mode and showing 4 viewports at the same time and viewports start to jump, flicker and change randomely as if there is no specific view assigned for each viewport, and that causes a problem when I want to see and work with my model in 4 different views at the same time.
I'm cureently using 3Ds Max 2013 and previously the issue was exactly the same for 3Ds Max 2012. I should add that this issue is gone when I use OpenGL, but I really want to use it with "Nitrous" feature which gives more realistic real-time results.
Below is my system performance specs:
Dell Mobile Workstation Precision M6600
i7 - 2960XM CPU 2.7 Ghz
Nvidia Quadro 4000M - 2GB DDR5
8GB - 1600 RAM
I have just bought a new laptop to try and be a bit more mobile.I have upgraded and loaded AutoCad 2012, no problems so far.The problem I have is when the program is opened and I hover the mouse off the drawing area over the ribbons etc,I unplugged my wireless mouse and used the touch pad as I thought the mouse was the problem, no good.
I have checked the display and graphics drivers and they are all up to date.I did a bit of a search regarding this problem. One suggestion was to change the display settings from 32bit to 16bit, this did no good. Also another was to change the Hardware Acceleration, and some people said this worked for them. However I tried this but the button was greyed out and wouldn’t allow me to change.I had no problems with XP Pro, I am beginning to hate this Win 7 operating system, I can’t understand why Microsoft always have to change things when it’s not broken.I eventually wanted to have this Laptop plugged into my 27inch monitor and use it as a desktop computer, but have the mobility.
The issue we have all been experiencing with LR 4 RC2 seems to still be in the release of 4.1
When I try to publish a photo to my flickr photostream I get the following error:
Can't update this collection. And internal error has occurred: A semi colon character was expected.
I find this to be ridiculous. We let the powers that be know of this issue and still nothing seems to have been done. I guess I have to return to the RC1 release just to get my photos uploaded and retain my usability with comments?