i resently installed cs4 and when i open a new doc and creat a canvas... the canvas shows up in my layers but not on the screen.... the same is true when i open a past project... the layers of the project are in the layers palate but their is again .. no image on the screen...
i tryed uninstalling and reinstalling.
i have:
vista ultimate x64 sp1
amd phenom 2.3 quad-core
4gb ram
512mb graphics
1t hd
I'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies View RelatedI just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies View RelatedUsing Autodesk BDS 2014 - AutoCAD Architecture..
If I load the attached lsp file, I will find on the final line at the command prompt...
No canvas exists. Click New Canvas.
When I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
Is there a rotate canvas plugin for cs2 that works like the rotate canvas in sketchbook pro?
View 4 Replies View RelatedI insert pictures on camvas on Photoshop cs4 ok?the size is even bigger or smaller from canvas. I need to insert a picture and with a single command (key shortcut) this picture to be resized to fit the camvas 100%.is there a key shortcut that does this action?i dont want to create an action.
View 4 Replies View RelatedI have been running into an issue whenever I try to open up Photo Shop CS5 on my Mac. While trying to open up a document, whether it be a brand new one or opening up a previous file, the canvas is missing.
On the side in my workspace all the layers and options are visible but there is no image to be found. I have searched online and found that holding: "command+option+shift" will reset the preferences and that usually does the trick. Problem is that after I quite out of PS and reopen it, I run into the same problem.
I clicked something by accident in CS4 and now the canvas stretches all the way to the right, with a couple of panels floating over the upper right part of the expanded canvas, with right scroll bar obscured by those floating panels. I want it back to what I believe is default, with the panels in their own static section on the right, separate from the canvas.Where is "reset" or something else to restore?
View 2 Replies View RelatedI'm using CS6 and have everything running as usual. I make a new file, normal size of my art and everything, but the canvas (background) does not show up.
I also have navigator open since I use full screen. So as I draw strokes, I see them appearing in the navigator, but I cannot see the canvas. All I see is the color of grey. Although the canvas is certainly there, since I can make visible strokes, it seems as if it were transparent, except I hadn't done anything with the image to start.
I just cut an object out of a picture and copied it to a new canvas. The object was not rectangular so I had some canvas showing. I'm not even sure how I did it, but I was able to find the command to turn the canvas clear, which is what I wanted. After I saved and exited, I placed that file into an InDesign document but the canvas was showing up white, not clear.
View 3 Replies View RelatedI'll place a large image on a small canvas and start erasing the background, then if I move it, I see parts of the background outside of the canvas. Is there a quick and easy way to delete parts of the image that fall outside of the canvas?
View 3 Replies View RelatedIs there a command that will let me scale an image to the canvas? I am importing a lot of images into PS and need them to be 600x600 or less. having to use transform on every one is very time consuming. I believe I have seen a command in photoshop called fit to canvas...
not sure though any solution? I have also tried batch image resizers but we are pulling the images off the internet and it takes too long to save the files with the correct image name etc... if i could find a command in PS that would just resize the image to the size of the canvas it.
I'm using PSCS and I can't get the entire canvas to rotate 90 degrees or flip vertically or horizontally (see attached screen shot). In fact Edit>Transform is dimmed unless I Select All, but then I lose part of the image unless I stop, make a bigger canvas, select all, rotate and deselect. Another workaround is, I can make the background layer into an O layer and then I can flip and rotate, but again,only the image moves, not the canvas. I used to be able to do it but not since I re-installed PSCS.
View 5 Replies View RelatedI was trying to add 5mm around the canvas, when i noticed something strange.
I changed the measurement to cm, then added 1cm to each, Height and Width, then changed the Width measurement to mm (which changed both displays to mm) but only one of the setting changed to mm; the height still had the same value it had when displayed in cm.
This only happens when both Height and Width are changed.
im currently working on a project that requires a very large canvas. currently, photoshop will not create any canvas with pixel dimentions of over 30k x 30k. the only way i can currently fit my entire image is to drastically lower the image DPI, any way to change this limitation photoshop has, or if theres another program I can use to do this?
View 1 Replies View RelatedIs there any way to make it so that layers outside the canvas are visible? Like on Flash MX if you have a layer that is outside your stage, then you can still see them.
View 9 Replies View RelatedI have been using the action Hayes Island Variant on a couple of my photos, it makes them look like they are painted on canvas. The problem is that it uses the built-in Photoshop texturizer for sandstone and canvas, and in the more open areas like water and sky, you can see a repeating square pattern. I printed it out on glossy paper, and you can definitely see it. I want to get this blown up on a poster. Any suggestions on another canvas texture that doesn't look like this, or some other way to fix it?
View 6 Replies View Relatedi'm trying to take 3 pictures that i have resized into 8x10, and 2 - 3.5x5
I want to have the 8x10 in the middle, and the 2 3.5x5 on the left and right of the 8x10.
I am trying to open a new document to make a design that will be printed.Since it will be printed, I set my resolution to 300 ppi.I need my canvas size to be 6.5" by 3.625", but the canvas size automatically sets itself to 6.5" by 3.627", and I can't change it.
I don't have this problem at lower resolutions
I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas?
I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?
Canvas is always align center of screen. is it possible to move where i want? I need right side windows that size. but it's blocking my canvas.
View 1 Replies View RelatedI bought Adobe creative suit 6 design standard yesterday. when using photoshop, the background canvas flickers and becomes transparent when i do things (zoom, erase, brush)
I have followed the solution of changing the drawing mode to Basic, but it is still an issue and is making photoshop unusable.
I have attached a picture that gives a good reference to what I would like to do, simply put - i have taken the background out of a picture but I just need to extended the empty background to the left so i can add a logo there.
View 1 Replies View RelatedI have 4 layers on a transparent canvas. Each of the layers overlaps the other and has a drop shadow on the layer behind it.
Looks just the way I want it -- except the shadow not only hits the layer behind it -- but also the canvas area.
I don't want the shadow on anything but the layer images. How to remove the shadow from dropping on the canvas?
I want to change the canvas size, though why is it that when I press the down arrow it adds to the canvas on top, and when I press the up arrow it adds to the canvas on the bottom? It just seems like it should be the other way around.
View 6 Replies View RelatedOS: Win 8 Ps: Cs6
I activated Photoshop on my new laptop and set my Preferences the way I like them and then I made a New Document and added a New Layer but when I clicked the New Layer Icon at the bottom of the Layers panel the area behind the canvas turned from a dark grey to transparent and then when I tried to draw a Rectangle shape the entire document became black and when I clicked the New Layer Icon again the black went away and the shape appeared and at the same time the area behind the canvas rotated through the dark grey, black and transparency again ...
to clarify ... at first the area behind the canvas went to transparent from a dark grey but under other circumstances like using the paintbrush, drawing shapes etc. the area behind the canvas will first be dark grey, then black and then transparent.
I tried resetting the Preferences by Alt + Ctrl + Shift at lauch of Ps but this didn't work at all.
The nice man at Adobe did something with my files and when done he placed a Prefs Icon on my desktop.
I wondering if maybe I ought to deactivate and reactivate or just out and out uninstall and reinstall.
I have both Photoshop CS6 and CS4 and they both are not opening the image. when I open RAW format files, they open up okay IN Camera Raw but when I am done in there and open them in PS the file displays for a millisecond on the canvass and then a black screen of hate pops up. I tried unistalling PS CS6 and that didn't work. I also tried reinstalling my newest AMD driver for my Radoen 6870 2G card but that didn't work. I then proceeded to update to Win7-Service Pack 1 update and that didn't do anything either.
JPEGS also do not display in PS as well. I am not sure but I think I might have to downgrade my disply driver to get this to work. My system specs are displayed below.
SYSTEM SPECSWindows 7 Ultimate Edition (64-bit) Service Pack 1 (Build 7601)
9.0.8112.16421
8192 MB
AMD Phenom(tm) II X4 940 Processor
2995.6 MHz
Speakers (Realtek High Definiti |
Speakers (TASCAM US-122 MKII) |
Realtek Digital Output(Optical) |
Realtek HD Audio 2nd output (Re |
[code]....
Is there a way to make multiple canvases in a single .psd similar to how you can have multiple art boards in illustrator?
View 1 Replies View RelatedI would like to add canvas and texture (i.e. extend only the parquet/floor) at the top and at the bottom.The brochures at the top and at the bottom of the photo are too close to the edge.I can use photoshop CS5 and CS6.
View 1 Replies View RelatedMy workflow depends on being able to see my desktop while I work on images in PS. CS6 now has an application background (canvas?) that prevents this:
View 5 Replies View Related
