I would like to add canvas and texture (i.e. extend only the parquet/floor) at the top and at the bottom.The brochures at the top and at the bottom of the photo are too close to the edge.I can use photoshop CS5 and CS6.
View 1 RepliesI have been using the action Hayes Island Variant on a couple of my photos, it makes them look like they are painted on canvas. The problem is that it uses the built-in Photoshop texturizer for sandstone and canvas, and in the more open areas like water and sky, you can see a repeating square pattern. I printed it out on glossy paper, and you can definitely see it. I want to get this blown up on a poster. Any suggestions on another canvas texture that doesn't look like this, or some other way to fix it?
View 6 Replies View RelatedI have a series of sheets, each with two viewports to show two plan views of a long road alignment. I arranged them to read bottom to top, as it goes up stationing, as we do with cross section sheets, but have been told by an outside reviewer that the sheets are confusing and should read top down.
How would you arrange them?
I'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies View RelatedI just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies View RelatedHow does one create a texture similar to this?
View 2 Replies View RelatedFor my 3D scene, I have to use a texture file on the floor. If I use the only file, than it looks really boring and below par. What I want is, I want to generate some (around 6-8) texture files within the original texture file - so the colors of all the texture files remain same but only the texture varies.Likewise there are more than 500 texture files and I just can't do them manually. Is there any way out to do this in Photoshop?
View 3 Replies View RelatedUsing Autodesk BDS 2014 - AutoCAD Architecture..
If I load the attached lsp file, I will find on the final line at the command prompt...
No canvas exists. Click New Canvas.
When I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
I have a lava texture and a ground texture. I'd like to be able to make some cracks on the ground texture that would show through the lava texture below it. Something like a cracked mud look. I would be using this for a game I'm making form some terrain textures. Are there any plugins that would aid in making these transparent cracks and perhaps even add depth to the cracks?
I guess a spider web where the spider was on crack would be something I'm looking for. Similar to the following image:
Lava Ground
Is there a rotate canvas plugin for cs2 that works like the rotate canvas in sketchbook pro?
View 4 Replies View RelatedI cannot see the bottom of my workspace. I have tried different views and different workspace configurations.when I open an image it is halfway cut off at bottom of screen and I cannot scoll it up with track pad or mouse.
View 6 Replies View RelatedWhen I am using CS at home - at the bottom - there is like a bar along the bottom - you know like when you open or save a file - you see like a blue progress bar on it. When I use CS2 at uni, I dont see it -
View 3 Replies View RelatedI need to do something that I've done a hundred times before with simple image editors on my old Windows desktop, but now I have a shiny new MacBook Pro with an Adobe Creative Cloud subscription, so I'm learning to use Photoshop CS6.
I have an image someone sent me that has text at the top and bottom of the image and too much "white space" in the middle (it's not white, but work with me here). I want to cut that part out, to have the middle disappear and the top and bottom sections join.
how to make the middle disappear (I used the regular select instead of crop, selected the middle, inverted my select, and chose Cut). But the top and bottom parts don't join.
I asked my Photoship savvy co-worker and she told me all about making layers to do this and that, and overlapping (offsetting?) copies of the image. My ears began to ring. This CAN'T be so complicated. With the free photo tool on my Windows machine, I could highlight what I wanted to get rid of, press Delete, and it would remove that part of the image and join the top and bottom pieces.
I'm trying to fade text from top to bottom using a path I have always followed, but isn't working now:
1. Select the layer the text is on
2. Create Fill or Adjustment Layer > select Gradient from the drop-down menu
3. Click on the Gradient bar to bring up the options
4. Adjust opacity, direction, colour > OK
When I create the Fill or Adjustment layer and select Gradient, the gradient is applied to the whole document rather than just the text on the layer I've selected.
My text is white against a blue background..I have tried selecting the gradient "Foreground to Transparent", but can't get past the stage where that is applied to the whole document.
I have been in the process of making a map which I currently have in illustrator. I also downloaded some administrative boundaries which I have converted to a path in illustrator and am trying to overlay on top of this map.
The problem is, it just doesn't line up. If the top is aligned, the bottom and sides will be off.
Is there a way to select a few points on the path of which I know the exact position on the map and have illustrator warp, skew, resize the path and it will magically fit?
As the subject already says: when I make a site with Web Photo Gallery in PS7 than I make it with an startpage of thumbnails (choose Simple), the photo behind is the big one. So far so good, but there are always several empty html-lines beneath the picture.
It pretents there is more to look at 'cause you can scroll down but this is only empty space. I delete these lines (HTML) everytime with FrontPage but is it possible to set the style in Web Photo Gallery without those "lines" ?
Is it possible to dock OPTIONS bar to the bottom of the window in CS4?
View 3 Replies View RelatedThis has baffled me that photoshop does not do this. But why can't I not ctrl+click on a layer and get to the layers underneath that layer? No matter how many times I ctrl+click the layer to select it, it just selects the same topmost layer.
It is interupting my workflow majorly and it is really frustrating when using a lot of texture overlays to have to hide them and then ctrl+click to find where the layer is that I want to work on. Right clicking on my document just brings up all layers in my document no matter where my mouse is.
This is what shows when I right click: [URL]....
I have a multiple layer image with a background image on one layer. Is there an easy way to round the bottom corners of this one layer? BTW -I'm using CS6.
View 3 Replies View RelatedIs it me or is leading only affecting the bottom line/sentence of the line HIGHLIGHTED in CC?
Before, if I wanted to set the leading, I would highlight the line I want to affect and set it...that selected sentence would be the one to shift up or down. Now, the leading affects the sentence BELOW the sentence I highlighted.
Is there some setting to switch it back?
I am trying to learn what has been done to the top photo to give the look of the bottom photo.Black suit looks navy, but not too much of the original photo is different. White seems brighter and blue seems bluer.
I tried using colour match in photoshop but it didn't look the same.
How do I cut the bottom of a photo into a wave shape?
View 5 Replies View Relatedhow to use the marquee tool to delete the bottom 2/3rds of a rounded rectangle.
Here's what I am doing:
Clicking on the rounded rectangle and drawing it to the size I want
selecting the marquee tool and selecting the area of the rounded rectangle I want to delete.
After I selected the area with the marquee tool, I press delete and instead of the area I selected being deleted, the whole layer is deleted instead.
When I print from Elements 11, I get a small white border on bottom and right of picture (should be borderless).If I print from another source e.g. iPhone, I do not get this border. How can I eliminate border in Elements 11?
View 6 Replies View RelatedI cannot move any layers as it only moves the bottom square.
View 4 Replies View RelatedBy default Adobe Photoshop creates new layers on top of the current layer. In the Western languages we read from top to bottom and left to right. So when I start creating a web site in Photoshop I start from top to bottom as well. However Photoshop creates the new layer above the current, which is the opposite of what I would like to do. I need Photoshop to create new layers below the current layer. I know by holding CTRL/COMMAND and clicking the NEW LAYER icon, will do what I need. However if I do CTRL+J to jump/duplicate the current layer, or select a layer and ALT+DRAG again to duplicate it, again it puts the new layers in top. Is there a way to reverse the default order Photoshop places layers? If not, I suggest that to Adobe implement an option in the general settings for Photoshop. Flash for example had similar option to read/place layers from top to bottom or bottom to top.
View 3 Replies View RelatedHave used all sorts of queries but can't seem to locate how to:
Move the tool options from being displayed on the bottom of my workspace to the top (like a bar across the top).
I can't seem to find anything to "drag" it or move it.
I'm running PS CS3 on Mac iBook with 10.5.8
I've been using this setup for years & have always been able to drag out the right bottom corner to increase the grey space round an image so i can transform better or what ever. But now when I try to drag out that corner the image window flinches slightly & a line appears around the image which disapears when I let go.Also when I try to expand the layers palette down by dragging it's lower right cornes so I can see more layers nothing happens, there is no stripey corner marks on that corner & when i try click & try to drag nothing happens.
After connecting to a flat screen TV for a presentation yesterday, the Photoshop CS6 application frame I was working on suddenly had the bottom edge below the screen on my MacBook Pro.
I can uncheck Application Frame in Window to free up the project, but with it checked I cannot find a way to reach the bottom of the frame and the scale input control. Also cannot reach the lower layers in the layer menu.
I like to keep my layers carefully named. I often create new layers over existing ones to build up effects and paint in details. When I merge these layers, Photoshop always assigns the new merged composite layer the name of whatever the topmost layer was. I would much prefer it to default to naming the new layer whatever the bottom layer was called. I'm using CS5.5.
I might start with my assets in a file, with layer names like: Model, Field, Product, Logo, etc... Then add effects on layers called, Shading, Highlight, Package Detail, Lettering, etc... over each original layer. When merged, instead of being named the more-appropriate names, it will of course use the top layer names and I end up with my layers called "Shading, Highlight, Package Detail, Lettering. It's made much worse when I duplicate effects to modify and apply to multiple layers, then merge, leaving me with a file with layer names "Highlight, Highlight Copy 1, Highlight Copy 2, etc..." Renaming to my original layer names is very tedious as a result.