I must be missing something because it just won't loop forever.
I selected it...but still...all I get is one loop. I can loop it 100 times, still only loops once.
I am using PS CS2, also tried ImageReady CS2,
i need to do a loop animation of several stripes that starts at lets say 2units distance from each other, they separate slowly and by the end they have 15units separation, my problem is that each stripe is a separate object, so i offset their keyframes, but when i want to tweak the keys on curve editor they dont apply to the other copies. Any other way to do this simpler?
quick example on the image attached, real application on the video, video shows the animation(rendered sequential images of 1 loop then applied as texture) but with linear speed, so constant separation, i need to apply the above here, these dont only move on the X axis but on the Y aswell, while keeping the symmetry fixed on the center.
[URL] ....
I have followed a tutorial on creating a waving flag. The scene consists of a plane and cloth modifier and wind modifier that makes the flag wave. It looks great, but I cannot seem to get it to loop seamlessly.
Ideally it would be 50-75 frames and looped seamlessly but I have been trying for two days and cannot accomplish this.
I'm trying to do something very simple in PS CS6 that's proving to be, well, not so simple (for me at least). All I want to do is animate a layer in a clockwise direction and end up with a seamless looping animated gif. I discovered rotation can't even be animated unless you convert the layer to a smart object, first of all (and by accident. And the "Motion" function doesn't seem to work much at all, where there is a "Rotate" option.).
And of course simply copy-pasting the first key frame in the timeline to the end of the timeline just makes the layer rotate clockwise, then counter clockwise back to it's original position.
I have a simple 3d object animation - it rotates over 1 second. The movie has 1 second. When played, it rotates in a loop.
I've converted the 3d layer into a smart object. The smart object animation timeline has 5 seconds, but the nested 3d object rotates only once and then stops. How to make the internal 3d animation loop inside the smart object?
I want to make one shorter animation loop within a longer one. Example would be a rotor of a plane spinning when the plane flies by, or a parameter of a material looping within lets say 15 frames (e.g. UV offset changing in cycles) while the whole walk cycle is 60 frames long. If it is a simple property that has to be changed I could simply key in a multiplied value (in the previous example I could offset the UV by 4.0 so it would loop 4 times) but this wont be a solution for more complex stuff.
View 1 Replies View RelatedI am a graphic designer and I work on w7 64.I find the latest version of Edge Animate.I saw several tutorials, amongst those showing how to make a loop on an animation. I proceed as explained in the preview on my browser (Chrome), the animation runs, but no loops.In fact, I tried other interactions and other triggers : nothing of these works there!
View 5 Replies View RelatedI am trying to get an animation to auto play, and loop only a particular part of the animation.
For example, the first part of the animation is my logo dropping in and bouncing. Then certain parts of the logo are animated continually, but I cannot figure out how to do this without just creating a huge timeline?
how use animation loop without trigger?
I tried to do mouseover
var my_time = sym.getSymbol("mySymbolInstanceName").getPosition();
if ( my_time == 0) {
sym.getSymbol("symbolName").play();
}
loop not work.
I am creating web banners to put on eg. Google where the banners must stop animate after X seconds.
Now.
After the animation looping ends (after eg. 2 loops) I need the banner to jump to a "end message", eg. Book today! - how can I do that?
I have a box with a logo on it. I need it to float in the middle of the screen and slowly rotate in random directions on a continuous loop. I'm not good at scripting, but I know there must be an easy way to do this.
View 1 Replies View RelatedI have the latest version of CC. I'm trying to use PS, but it takes forever to open. I literally go to Start> PS and wait for 10-12mins for the program to fully be open to use..I don't have this problem with any of the other CC software.
>I dont have a lot of fonts installed
>Not plugins installed>>> No customized preferences
I hit Print. It takes at leas t10 secs... then if I change the number of copies, go into print settings, it takes another 30 secs..Photoshop cs4 and 5 do this.
Windows XP 64
Dual Quad Core
8gb ram
plenty of HD space this happens with numberous files and printers... we have several HP 1050c plotters, Sharp printers, etc..
Just as the title says, every time i start photoshop CS2 (latest update) (windows xp) the first image always takes a long time to load (e.g. 30 seconds) no matter the image or how long i give photoshop to load first.
View 1 Replies View Relatedwhen I fire up PS the opening splash window only took about 15 - 20 seconds to cycle through and PS opens up. Since then it takes a very long time to open. The "Reading Preferences" takes nearly a minute or so then all the other race through and PS opens. Why would the "Reading Preferences" take no time at all one day then the next take over a minute? I haven't changed anything to my knowledge in the Preferences tabs to cause this.
View 16 Replies View RelatedI'm running CS4 in XP on a fast system with plenty of RAM. The last few weeks, loading up is taking a looong time. The start-up screen shows "reading preferences" for 2 - 3 minutes most times. I've re-set and trashed my preferences file with no change. I've also removed all plug-ins, also with no change. Once PS is up, it works normally. Does anyone have any suggestions?
View 5 Replies View RelatedInstalled Elements 10 on Win 7 64 bit laptop that is plenty powerful.Created a shortcut to launch Elements directly from the directory it installed in. It can take several minutes to open, if it does. Have tried Run as Admin, no difference. Sometimes nothing happens and I have to try several times to get it open. Once open I went to Preferences and turned off all Media Analysis, and all Third Party things and anything else that might be slowing it. Only imported about 50 files into the album, and it still takes so long to open I can't tell it is even trying.
View 7 Replies View RelatedEvery time I open a photo from explorer, Lightroom or somewhere else, Elements starts in quick mode. I never want qick mode, I want to use experts mode as default. How can I do this?
Plus, is there a way to get rid of the bar on top completely? It takes up valuable screen space and is completely useless.
can I get xara to use the 100% instead of 75% as a default?
I know how to save settings like this to documents, but as soon as I close all documents, the settings are gone, units settings too, it always forgets them, so annoying. Did I miss a save button?
I've noticed this with several other Adobe apps, but it seems to happen with Illustrator the most, it takes forever to shut it down. Why is it such a chore and a resource hog for this program to just close? Half the time, I need to use the Windows Task Manager to just force the program to close, because it's slowing down my system, and I don't have all afternoon to wait around.
View 3 Replies View RelatedI am currently working on After Effects CS6 and I'm wondering why it takes a long time for me to render a composition. I am not sure if the problem is with the mac that i am using or with the settings i have on AE. When I render the composition of 21 seconds video with 1080p 29.97fps it takes 5 hours and eralier i triend rendering again and it takes 7 hours. is this normal?
I am using Mac with this spe
Processor 2 x 2.4 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
"Non Autodesk DWG. This DWG file was saved by a software application that was not developed or licensed by Autodesk. Autodesk cannot guarantee the application compatibility or integrity of this file."
In opening some drawings made by a Non-AutoDesk program, I get the above message. There does not appear to be any problem with the drawings, I can work with them no problem with AutoCad, but the message seems to remain even after saving the drawing with AutoCad.
I know that setting DWGCHECK to 0 can suppress the message, but is there a way of getting rid of the message for good.
Every time I try to plot something with a PDF embedded it takes a very long time to spool and plot. Additionally, a PDF in the drawing slows it down so significantly it's almost not worth using..This happens whether the PDF is less than 1 MB or 50 MB...no difference. Has this been fixed in 2012? Why to PDF's do such a drain on system resources when they're such small files to begin with?
View 5 Replies View RelatedWell, over a minute and it feels like forever. Working Smoke 2013 EXT1 with mostly soft imported material. In the past the size of the librarys had much affect on this but with the new lay out I can't see a way to limit the libraries as they are always in the side pannel. Is collapcing them stopping that library from being included in the auto save? This is only a 20 min show but I do have 3 in here and expect to have 10 before it's all said and done.
View 2 Replies View RelatedWhy does it take so long for illustrator to save a file when InDesign seems so much quicker?
View 5 Replies View RelatedI have simple composition that animates a two shapes that I am using as a "screen" to show photos. The shapes are 3D; the camera movement is minimal. I have an Ambient light and two Spot lights.
I am on a one year old i7 processor with 16 GB of RAM. Cache files are written to an SSD.
Still it is taking a long time to render (it's a three minute project and takes about 20+ hours to render), and there's no pics added - just the "screen".
The final project is similar to the many templates you can find that show photos/videos. It's basically a fancy slideshow, but unlike those you can buy, it will hold 25 to 30 pics.
Any thoughts on what I can do to either use something other than a 3D shape (but still keep it 3D) or change parameters or workflow to cut down the render time. . . I am pre-rendering the composition now (which will take the 20+ hours) but obviously, if I want to change anything with the movement or the overall length, it means another day of rendering.
We are working in a shared storage environment with 4 editors runnig Premiere Pro CC. We set up a Master Project with all the raw media, then split it between 2 editors to sync and create rough assemblies. Afterwards, we need to import the assembly sequences into the master project. I select a bin, Import a project file, select "Selected Sequences", Dynamic Link shows that it's connected to the project, then it takes 10+ minutes (I wish this were an exaggeration) to "load" to project so that I can choose the sequence(s) I want to import. This is even more frustrating when I import a sequence and it brings in duplicate Master Clips, forcing me to go back to the project and figure out what has change with the interpretation of the clips. Is there any way to speed this process up? Projects contain 5000 - 10,000 media elements.
View 3 Replies View Relatedwhen I first start LR4, loading the Book, Slideshow, Map and to a lesser extent, Web modules take forever. Especially the Book module - it takes a good 25-30 seconds to load. Once it's loaded it's fine. I've been told everything from "that's normal" to there's something wrong with my computer.
Laptop Spec's - Spring 2010 15" MBP 2.4 i5 with 8gigs of RAM, 256mb video RAM, 500gig 7500rpm HD.
Other's have reported similar delays (none reaching 25-30 seconds though), where as others don't have any issues at all.
Every time need to Print on IdesignCS2 and press the print dialogue it takes for ages before it shows up. I have a feeling that its due to the excessive amount of printer drivers installed. Where can i find them to delete them cause i don't use them!
View 4 Replies View RelatedA costomer sent us an IGES file 228 MB in size and it's trying to open but its been almost an hour.
I tried different options in the options tab before opening but still dooging it.
Dell Precision T3500
Windows 7 Pro
Quad Core Intel Xeon
6 Gb SDRam
NVIDIA Quadro
Product Design Suite 2014 Premium
We have a large assembly that we've been trying to get details views off of and it's taking anywhere from 15 to 45 minutes to create each detail view. IDW. We're using LOD and derived assemblies as it's 5000+ parts, but Inventor is simply bogging down and sucking system resources in the creation process. I've used every trick in the book that I know, butIt's taken me all day to get one drawing done.
View 9 Replies View Related
