how use animation loop without trigger?
I tried to do mouseover
var my_time = sym.getSymbol("mySymbolInstanceName").getPosition();
if ( my_time == 0) {
sym.getSymbol("symbolName").play();
}
loop not work.
On the stage I have a button and a hidden symbol. The symbol has an animation within itself.When I click the button, the symbol becomes visible and plays the animation. Its all good so far.I want to be able to click the now visible symbol, the animation within itself plays in reverse and then it hides itself. How do I make it hide itself after the animation plays in reverse?
BUTTON CODE (This works for me):
sym.$("AnimationOne").show();
var AnimOne = sym.getSymbol("AnimationOne");
[code]...
If I add this, it just hides itself without animating in reverse
I am a graphic designer and I work on w7 64.I find the latest version of Edge Animate.I saw several tutorials, amongst those showing how to make a loop on an animation. I proceed as explained in the preview on my browser (Chrome), the animation runs, but no loops.In fact, I tried other interactions and other triggers : nothing of these works there!
View 5 Replies View RelatedI am trying to get an animation to auto play, and loop only a particular part of the animation.
For example, the first part of the animation is my logo dropping in and bouncing. Then certain parts of the logo are animated continually, but I cannot figure out how to do this without just creating a huge timeline?
I am creating web banners to put on eg. Google where the banners must stop animate after X seconds.
Now.
After the animation looping ends (after eg. 2 loops) I need the banner to jump to a "end message", eg. Book today! - how can I do that?
I have made several Adobe Edge Animate projects and have inserted a stop trigger for the "home" arrival after animation intro. I just created a new project and can't get the stop trigger function to work. When I preview it plays through the entire timeline. I've tried several different combinations of triggers - sym.play from () at the beggining of the timeline and then adding a sym.stop at () and no matter what, it plays through the entire timeline.
View 3 Replies View RelatedI have a problem, i need create a function delay in the timeline with a trigger.
I want that my animation play every 3 seconds until the next sym.stop and then play again after 3 seconds.
Ej. I have 3 triggers in the timeline:
sym.stop(1000)
sym.stop(2000)
sym.stop(3000)
My idea is make a delay in all the triggers, like this:
sym.stop(1000)
delay.play (2000)
sym.play
sym.stop(2000)
delay.play (2000)
sym.play
sym.stop(3000)
delay.play (2000)
sym.play
Cause I dont know how to elaborate a function in jquery
I have created a symbol that is a horizontal banner consisting of six paragraphs of text P1 thru P6. Each paragraph is no more than 300 px wide.
I then created six trigger symbols and placed them beneath a 300 x 300 vieweing window on the stage.
When the stage opens, paragraph 1 (P1) is viewable in the window. If the user clicks a trigger, I want the banner to scroll left or right, from its current position, to display the corresponding paragraph.
Example : P1 is showing in the viewing window. The user clicks trigger #4. The banner scrolls right and eases P4 into view in the window. The user then clicks trigger #2. The banner then scrolls left and eases P2 into viewing position in the window.
My old (very old) Flash training tells me I need to set a numeric value into a variable when each trigger is clicked and then use that value and concatenate it with label text to tell the play head to play from the proper postion (play ("Para1")), (play ("Para2")), etc. where Para# is the label on the timeline.
I feel like I'm close to getting this to work, but after a number of hours of trying I've concluded that over time I've either forgotten a key step or there's some easier way to do this in Edge Animate. (I'm very new to CC and EA).
How do I use a button being clicked to trigger a function within CompositionReady? My overall aim is an On/Off button, the 'OnOffStatus' of which can be used to determine other factors within the program.
View 3 Replies View RelatedI need to have a symbol with it's own timeline play at the end of each slide in a slideshow. I have the animation for the slideshow but when it comes to the first symbol, all the symbols load instead of just the one needed for the slide. I have tried setting "play from" but that seems to refer to the symbol timeline not the stage timeline. All symbols are set to "hide" upon click.
The real problem comes when playing in reverse. The symbol plays first with "hide" feature but does not continue the reverse animation from the stage since the "hide" feature stops the action.
I have an animation with 5 different parts. I would like to trigger a random part when clicking on a button.
In order to do that I put labels on all parts (play1,...,play5). Then I put a code on the button on the click event :
var RandomNb=Math.floor(Math.random()*5)
if(RandomNb=1){sym.play("play1");}
It is just a simple test but it does not work : the animation play1 is always played no matter the value of RandomNb. I obviously make something wrong but I don't know what...
I'm working on a project that requires some interaction controlling video. I've used the piece of code from this thread [URL] and it works like a charm. But I'm looking at option of using youTube video for the same interaction.
So on creationComplete, I've added,
var vid = sym.$("holder");
vid.html('<iframe width="640" height="360" id="video1" src="//www.youtube.com/embed/o2l_zZOpSxk" frameborder="0" allowfullscreen="0" controls="controls"></iframe>');
I've got a symbol that I want to loop 3 times on the main stage.how to write the code
I was thinking of putting somethiing similar to the code below in the "onComplete" action of the symbol I want to loop (I know the code is wrong but I think it is a bit close):
var l_count = (0+1);
if (l_count <= 3) {
sym.play();
[Code]....
Is this close, or is there a better way to go about this?
wondering if there is a way to pause inside a loop. I am away that jQuery has a delay() function but i can't seem to get it to work.
was thinking something like:
blob = "This is a test of the emergency broadcast system";
for (i=0; i<blob.length; i++)
{
sym.$("Text").delay(300).html(blob[i]);
}
I have a simple snowflake animation where 4 different snowflakes are falling down the screen. These are all contained in a symbol which is set to loop. The goal is that when the user clicks a snowflake it will pause the animation, populate a popup text box (in another symbol) then resume playing after 5 seconds. I'm no expert with javascript and I've checked just about every resource I could find but can't seem to get it working. My initial thought was to do some kind of if/else statement that checks to see if the symbol is playing, then if it is, pause it for so long. I'm having a difficult time with the syntax.
View 1 Replies View RelatedI have a continuously moving looping slide show that has back and next buttons. When you press the next button it should move forward one where ever it is on the timeline every time you click it and the same for the back button.
This is the code I am using but the the problem is that it goes to else {sym.play("one");} when the button is clicked. No matter where in the timeline the next button is clicked, it goes back to number one. I don't know much about coding and I have tried everything to fix this but I am stuck.
var pos = sym.getPosition()
if (pos <= "one"){
sym.play("twenty");
}
else if (pos <= "two"){
sym.play("three");
}
[code]....
I want to loop a code / function .. let's say 100 times and each time one parameter or variable is counted up.I found "for"-loops and some with a counter.. but I coudn't get it to work in Edge Animate.Here is a fragment of the code I want to loop ->
$.get("URL...+Num, {}, function(ask, code) {
switch(ask) {
case '9':
sym.$("leaf"+Num).show();
var leaf = sym.$("leaf"+Num); // How can I count the setting variable? "var leaf+Num = ... " doesn't work I guess..
[code]....
How do I add animation to Muse? I wish to bring a png file into an existing background.
View 1 Replies View RelatedI create a child symbol on the stage animate it and store the varible in the window
var infoscreen = sym.createChildSymbol("_01", "stage");
window.infoscreen = infoscreen;
I put a Btn_inside the symbol and want to delete it. But first - I want to fade out the symbol. I dont know how to do this. So the animation has to be complete before delete, but how?
infoscreen.getSymbolElement()
.animate
([code]....
Is there a way to speed up animation? For example I have 5 sec animation. I want to play it normally (5sec) and play it reverse for 2 sec.
View 5 Replies View RelatedI am using the rollover and rollout features to get a slide up and down kind of button panel. However when I rollover each of the three section (it's divided into three panes) it gets really twitchy and won't do the roll up and down smoothly are do it at all. URL....
View 1 Replies View RelatedI have this button that, when clicked, opens a new URL - window.open("http://www.xxxxxx.xxx", "_self"); - after playing a 1000 ms animation. The problem is that it changes to the new URL too soon, before completing the 1000 ms. I tried a setTimeout, and it worked great, but it's not so elegant as it depends on the user's computer/net speed...
View 18 Replies View RelatedHow do I make my animation play when someone scrolls down where the animation is located?
View 30 Replies View RelatedI created a simple banner with a couple of basic animations. I never even touched any code. Only basic images are used, no triggers, no symbols.If I preview within Animate, everything works fine.
As soon as I hit ctrl+enter to preview in my browser, everything just stays blank. I checked in multiple browsers, all have the same result with no errors in console.Autoplay is turned on.
I need to create a mask that will hide the elements as they rotate out of a free-floating window. I have an animation currently that sits in a circular window and plays when the page loads. The screen shot below is from the page in Muse with the .oam file playing. The images are PNGs with transparent backgrounds so the animation plays over the background images.
What I'm trying to add is an iris effect I've animated in Edge Animate. I haven't been able to hide the edges of the vanes in the iris during animation. I've tried to cut and paste code that I've found on this forum and others but I don't know much about coding and I haven't had any success. This screenshot is shortly after the animation starts to play as the vanes rotate out of the window:
Basically, I need to mask the iris animation to keep the images from showing outside the circular frame. I've found that the clipping tool in Edge only does square or rectangular masks. I have a PNG that I can use as a mask but the coding has really got me flummoxed. The mask:
I just made my first edge animate project and made a progress loader animation. Works well.When i placed the code in the site the animation was always on, so i've hidden the item in css
#Stage { display:none; }
When my animation is needed i'm making is visible however the animation has already been started in the background so wont begin the right place. I'm wondering should i stop the stage autoplay in the config and then start the animation in JS? If so how can i go about starting the animation via JS.
I've been playing around with AdobeEdge.bootstrapCallback but cant seem to get it to play.
I created an animation for a landingpage on my website(built with wix.com).
My problem is, that wix.com has got no folder-organisation or upload-function and my Edge animation has *.html, *jscript and *.jpeg/*.png files.
In a Wix.com-forum, I've found a response, that said, that I should use external storage-websites for my files.I did so and put these files in my dropbox/public folder, copied the open links in the *.html file like this:
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
<title>Ani1</title>
<!--Adobe Edge Runtime-->
<script type="text/javascript" charset="utf-8"
[code]....
But, when I copy the code into my wix-page-html-app (for not-wix-user: a small field to insert html-code),nothing happens...
i created an animation for my index page of an already existing website. i tried to "publish settings" but app would not allow me to publish to my directory however it did allow me to "publish". when i uploaded the files to my server, only the splash image came up but the rest of the animation did not run. what am i doing wrong?
View 4 Replies View RelatedI have created an animation where the objects move left to right.Is there a simple way of 'flipping' the timeline so that the animation effectively plays in reverse, rather than redoing the animation altogether?
View 3 Replies View Relatedi have a little problem with my animation. If I want to see the animation without SSL it works. With SSL it doesent works and I dont know why?
My CC ist the newest and I tryed everything but the animation is not displayed on https://
when I import a project .oam in InDesign, and over the project, into a higher level, there is text, the text is covered from the animation when it run in folio.
View 1 Replies View Related